Dispers mavi 56 boyasının Fe3O4 gömülü akrilamit temelli polimer ile giderimi
Bu çalışmada Dispers Mavi 56 isimli boyanın Fe3O4 tanecikleri gömülü akrilamit - triazin polimeri ile giderimi araştırılmıştır. Adsorpsiyona etki edebilecek olan, pH, etkileşim zamanı, karıştırma hızı, sıcaklık, başlangıç boya konsantrasyonu ve adsorbent miktarı parametreleri incelenmiştir. Optimum koşullar altında, 25 mg/L başlangıç boya konsantrasyonu ve 1.5 g polimer kullanılarak %96.6 giderim verimine ulaşılmıştır. Boya konsantrasyon ölçümleri UVVis spektrofotometresi kullanılarak yapılmıştır. Sentezlenen polimerin adsorpsiyon öncesi ve sonrası FTIR spektrumları alınmıştır. Adsorpsiyon mekanizmasını araştırmak amacıyla yalancı birinci derece modeli, yalancı ikinci derece modeli, Langmuir ve Freundlich izoterm sabitleri hesaplanmıştır. Sonuçlara göre adsorpsiyonun yalancı ikinci derece kinetik modeline ve Langmuir izotermine uyduğu görülmüştür.
Removal of disperse blue 56 dye by Fe3O4 embedded acrylamide based polymer
In this study, removal of Disperse Blue 56 dye by Fe3O4 particles embedded acrylamide – triazine polymer was investigated. The possible effects of pH, interaction time, agitation speed, temperature, initial dye concentration and adsorbent dosage parameters on the adsorption were investigated. In the presence of 25 mg/L concentration of dye, the removal efficiency was reached 96.6% by using 1.5 g of polymer under optimum conditions. Dye concentrations were measured by UV-Vis spectrophotometer. The FTIR spectra of synthesized polymer were taken before and after adsorption. In order to investigate adsorption mechanism, the constants of pseudo-first-order, pseudo-second-order, Langmuir and Freundlich isotherms were calculated. According to the results, the adsorption well fitted with pseudosecond-order kinetic model and Langmuir isotherm.
___
- M. Teker ve H. Karaca, “Polyester elyafın etilen
glikollü ortamda dispers boyarmaddelerle
boyanması,” SAÜ Fen Bilimleri Dergisi, cilt 9,
no. 1, pp. 30-34, 2005.
- F. Akkurt, S. Benli ve A. Alıcılar, “Dispers
kırmızı 1 tekstil boyasının karakterizasyonu ve
uygulanabilirliğinin araştırılması,” Gazi Üniv.
Müh. Mim. Fak. Der., cilt 20, no. 4, pp. 429-432,
2005.
- C. S. Keskin, A. Özdemir ve İ. A. Şengil,
“Simultaneous decolorization of binary mixture
of reactive yellow and acid violet from
wastewaters by electrocoagulation,” Water Sci.
Technol., cilt 63, no. 8, pp. 1644-1650, 2011.
- P. Pandit ve S. Basu, “Removal of ionic dyes
from water by solvent extraction using reverse
micelles,” Environ. Sci. Technol., cilt 38, pp.
2435-2442, 2004.
- H. Zou, W. Ma ve Y. Wang, “A novel process of
dye wastewater treatment by linking advanced
chemical oxidation with biological oxidation,”
Arch. Environ. Prot., cilt 41, no. 4, pp. 33-39,
2015.
- Z. Rais, L. El Hassani, J. Manghnouje, M. Hadji,
R. Ibnelkhayat, R. Nejjar, A. Kherbeche ve A.
Chaqroune, “Dyes’ removal from textile
wastewater by phosphogypsum using
coagulation and precipitation method,” Phys.
Chem. News, cilt 7, pp. 100-109, 2002.
- M. X. Zhu, L. Lee, H. H. Wang ve Z. Wang,
“Removal of an anionic dye by
adsorption/precipitation processes using alkaline
white mud,” J. Hazard. Mater., cilt 149, pp. 735-
741, 2007.
- V. K. Garg, G. R. A. B. Yadav ve R. Kumar,
“Dye removal from aqueous solution by
adsorption on treated sawdust,” Bioresource
Technol. , cilt 89, pp. 121-124, 2003.
- P. L. Hariani, M. Faizal, R. Marsi ve D.
Setiabudidaya, “Synthesis and properties of
Fe3O4 nanoparticles by co-precipitation method
to removal procion dye,” Int. J. Environ. Sci.
Dev., cilt 4, no. 3, pp. 336-340, 2013.
- M. Farrokhi, S. C. Hosseini, J. K. Yang ve M.
Shirzad-Siboni, “Application of ZnO–Fe3O4
nanocomposite on the removal of azo dye from
aqueous solutions: kinetics and equilibrium
studies,” Water Air Soil Pollut., cilt 225, p. 2113,
2014.
- R. Dhodapkar, N. N. Rao, S. P. Panda ve S. N.
Kaul, “Removal of basic dyes from aqueous
medium using a novel polymer: Jalshakti,”
Biosource Technol., cilt 97, pp. 877-885, 2006.
- A. A. El-Zahhar, N. S. Awwad ve E. E. ElKatori,
“Removal of bromophenol blue dye from
industrial waste water by synthesizing polymerclay
composite,” J. Mol. Liq., cilt 199, pp. 454-
461, 2014.
- M. Özacar ve İ. A. Şengil, “Equilibrium data and
process design for adsorption of disperse dyes
onto Alunite,” Environ. Geol., cilt 45, pp. 762-
768, 2004.
- B. Batra, S. Lata ve C. S. Pundir, “Construction
of an improved amperometric acrylamide
biosensor based on hemoglobin immobilized
onto carboxylated multi-walled carbon
nanotubes/iron oxide nanoparticles/chitosan
composite film,” Bioprocess Technol., cilt 97,
pp. 877-885, 2006.
- M. S. Burkinshaw, “The role of water in aqueous
dying,” Physico-Chemical Aspect Of Textile
Coloration, West Yorkshire, Wiley, 2015, p.
131.
- J. Koh, “Dyeing with Disperse Dyes,” Textile
Dyeing, Rijeka, InTech, 2011, p. 209.
- İ. Şahin, S. Yılmzaer Keskin ve C. S. Keskin,
“Biosorption of cadmium, manganese, nickel,
lead, and zinc ions by Aspergillus tamarii,” Des.
Water, cilt 51, pp. 4524-4529, 2013.
- M. Horsfall Jnr ve A. I. Spiff, “Effects of
temperature on the sorption of Pb2+ and Cd2+
from aqueous solution by Caladium bicolor
(Wild Cocoyam) biomass,” Electron. J. Biotech.,
cilt 8, no. 2, pp. 162-169, 2005.
- B. Faust, “Ultraviolet/visible spectroscopy,”
Modern Chemical Techniques, London, Royal
Society of Chemistry, 1997, pp. 102-103.
- R. Rahimi, H. Kerdari ve M. Rabbani,
“Adsorptive removal of crystal violet (CV), a
carcinogenic textile dye, from aqueous solution
by conducting polyaniline/hollow manganese
ferrite nanocomposites,” 14th International
Electronic Conference on Synthetic Organic
Chemistry, Basel, 2010.
- Y. Tang, T. Hu, Y. Zeng, Q. Zhou ve Y. Peng,
“Effective adsorption of cationic dyes by lignin
sulfonate polymer based on simple emulsion
polymerization: isotherm and kinetic studies,”
RSC Adv., cilt 5, pp. 3757-3766, 2015.
- F. Foroozmehr, S. Borhani ve S. A. Hosseini,
“Removal of reactive dyes from wastewater
using cyclodextrin functionalized
polyacrylonitrile nanofibrous membranes,” J.
Text. Poly., cilt 4, no. 1, pp. 45-52, 2016.
- A. Masoumi ve M. Ghaemy, “Adsorption of
heavy metal ions and azo dyes by crosslinked
nanochelating resins based on
poly(methylmethacrylate-co-maleic anhydride),
” eXPRESS Poly. Lett., cilt 8, no. 3, pp. 187-196,
2014.
- J. A. Lopez, F. Gonzalez, F. A. Bonilla, G.
Zambrano ve M. E. Gomez, “Synthesis and
characterization of Fe3O4 magnetic nanofluid,”
Rev. Lat. Am. Metal. Mat., cilt 30, no. 1, pp. 60-
66, 2010.
- S. Dhananasekaran, R. Palanivel ve S. Pappu,
“Adsorption of methylene blue, bromophenol
blue, and Coomassie Brilliant Blue by a-chitin
nanoparticles,” J. Adv. Res., cilt 7, pp. 113-124,
2016.
- S. Lagergren, “Zur Theorie Der Sogenannten
Adsorption Geloster Stoffe,” K. Sven.
Vetenskapsakad. Handl., cilt 24, no. 4, pp. 1-39,
1898.
- Y. S. Ho ve G. Mckay, “Pseudo-Second Order
Model for Sorption Processes,” Process
Biochem., cilt 34, pp. 451-465, 1999.
- S. Srivastava ve P. Goyal, “Novel Biomaterials,”
Environmental Science and Engineering, Berlin,
C Springer-Verlag Berlin Heidelberg, 2010, pp.
87-88.
- P. B. P. B. Rai, S. S. Banerjee ve R. V. Jayaram,
«Removal of disperse dyes from aqueous
solution using sawdust and BDTDA-sawdust,” J.
Disper. Sci. Technol., cilt 28, pp. 1066-1071,
2007.
- G. O. El-Sayed ve M. E. M. M. F. Moustafa,
“Removal of disperse 2BLN dye from industrial
water onto activated carbon prepared from sugar
can stalks,” Int. J. ChemTech Res., cilt 3, no. 3,
pp. 1604-1611, 2011.
- R. Shokoohi, F. Samiee ve S. Azizi,
“Comparison of performance evaluation of
aluminium sulfate and ferric chloride for removal
of disperse blue 56 from synthetic wastewater,”
Pajouhan Sci. J., cilt 11, no. 3, pp. 22-28, 2014.
- S. Hemsas, H. Lounici, Z. Belkebi ve K.
Benrachedi, “Removal of dispersed dyes from
aqueous solution using activated carbon prepared
from olive stones,” J. Agr. Sci. Technol. A, cilt 4,
pp. 414-421, 2014.