Su jeti ile kesme sistemleri ve uygulama alanlarının değerlendirilmesi

Bu çalışmada; su jeti ile kesme yönteminin, bilinen diğer kesme yöntemlerine göre sahip olduğu üstünlükler ile endüstriyel uygulama alanları araştırılarak, hangi alanlarda ne amaçla kullanıldıkları incelenmiş olup, su jeti ile kesme yönteminin günümüzde ve gelecekte endüstriye katkıları araştırılmıştır. Bütün bu araştırmalar sonucunda geleceğin vazgeçilmez kesme yöntemlerinden biri olacağı ve bilinen endüstriyel uygulama alanlarının tamamında kullanılacağı düşünülmektedir.

Waterjet cutting systems and assesment of their industrial applications

The waterjet cutting method has been studied for what reason it has been used in what subjects regarding with the other known cutting methods with the advantages. It has also been investigated that what it could bring to current and future industry which is beneficial. The result of all investigations shows that it seems to be one of tha unavoidable cutting methods and it can be used in all known application domains in industry.

___

1. Hunziker, W., “Water-jet Cutting“ BQSTRONIC LASER AG., CH-3362 Niederönz, Switzerlend, January 1990.
2. Haylock, R., “Waterjet Cutting – A Technology of A float On a Sea of Potential” Manufacturing Engineering, Vol. 99, pp 37-41, November 1987.
3. Steinhauser, T. J., “Abrasive Waterjets ; on the Cutting Edge of Technology“, Flow Systems, August 1989.
4. Hashish, M., “Optimization Factors in Abrasive-Waterjet Machining” Journal of Engineering for Industry, Vol. 113. pp 132-139, February, 1991.
5. Akkurt, A., “Çeşitli Malzemelerin Aşındırıcılı Su Jeti ile Kesilmesinde Yüzey Özellikleri, Sertlik ve Mikroyapı Değişimlerinin Farklı Kesme Yöntemleriyle Karşılaştırmalı Olarak İncelenmesi” Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Doktora Tezi, Temmuz-2002, Ankara, Türkiye.
6. Warnecke, H. J. And Schlatter, M., “Treatment of Meterials with high pressure waterjets“, E330, Vol. 60. pp 189-201, 1984, Stuttgart.
7. Richard, F., “Waterjet Machining in Relationship to Design Engineering for Manufacturability“ Hydro - Abrasive Machining, 1992, California, U.S.A.
8. Öjmertz, C., “Abrasive Waterjet Machining”. Department of Production Engineering, Licentiate Thesis, January- 1994, Sweden.
9. Momber, W. A. And Kovaceviç, R. “Principles of Abrasive Water Jet Machining“ November 1997, Dallas, Texas.
10. Morris,C.J. “A laboratory study of high pressure waterjet assisted cutting“ National Coal Board, 1987, U. K.
11. Fowell, R. J. “Waterjet assisted drog tool cutting; parameters for success” University of Newcastle upon Tyne, S. T. Johnson, Plymouth Polytechnic, 1989, U.K
12. Öjmertz, C., “A Study On Abrasive Waterjet Milling“ Department of Production Engineering, Thessis for Degree of Doctor of Philosophy, March- 1997, Sweden.
13. Flow International Company “Three Dimensional Abrasive Waterjet Cutting System”, Flow International Corporation, 1993, Germany.
14. Jet Edge A Division of TC/American Monorail Inc., “Ultra High Pressure Intensifier Pumps”, U.S.A.
15. Hashish, M. “Abrasive-Waterjet Machininig“ Journal of Engineering Materials and Technology, May 1989, Vol. 111, pp 154-162, U.S.A.
16. Zaring, K. “Procedure Optimization and Hardware Improvements in Abrasive Waterjet Cutting Systems“ 6th. American Water Jet Conference. August 1991 Houston, Texas, U.S.A.
17. Johnson S. T. “Advances in Cleaning and Coating Removal Using Ultra-High Pressure Water Jet Technology”, Jet Edge Inc., 1993, Minneapolis, Minnesota, U.S.A.
18. Ayers G. and Amundsen, B. “High Pressure Integration of Waterjet Special Systems”, Flow International Corporation. 1995, Kent, Washington, U.S.A.
19. Woolman, R. F. “Waterjet Machining in Relationship to Design Engineering for Manufacturability”Hydro-Abrasive Machining Inc., 1992, California.
20. Miller, D.S. “Expanding the Market for Abrasive Jet Cutting Systems”, BHR Group Limited, 1994, U.K.
21. Schmitt, A. Fekaier, A. Houssaye, G. “Optimization of the abrasive jet cutting surface quality by the workpiece reaction forces analysis”, Ecoles des Mines de Douai;, Laboratoire de Robotique de Paris, 1994. France.
22. Sounders, D. H. High performance DIAJET cutting system, BHR Group Limited, 1998, U.K.