Dönel parçaların işlenmesi için SD kodları üretimine esas olan parça geometrisinin bilgisayar ortamında oluşturulması

Bu çalışmada dönel makine parçalarının Bilgisayar Sayısal Denetimli (BSD) torna tezgahlarında işlenmesi için bir Bilgisayar Destekli Üretim (BDÜ) sisteminin geliştirilmesi amaçlanmıştır. Sistem parça geometrisi tanımlama, Sayısal Denetim (SD) kodu üretme ve Simülasyon, Program Kütüphanesi, Ayarlar ve Çıktı alma modüllerinden oluşmaktadır. Çalışmada program çıktısına esas olan taslak ve bitmiş parça geometrisi, Bilgisayar Destekli Tasarım (BDT) sistemlerinden bağımsız olarak, sistemin parça geometrisi tanımlama modülü tarafından oluşturulmaktadır. Üretilecek parçanın malzemesi, kaba boyutları ve ölçü sistemi girildikten sonra bitmiş parça geometrisi, klavyeden girilen koordinat değerleriyle oluşturulmaktadır. Burada geliştirilen sistemin parça geometrisi tanımlama modülü tanıtılmaktadır. Sistemin geliştirilmesinde Borland Delphi programlama dili kullanılmıştır.

Part geometry generation in computer environment for producing NC codes of turned parts

In this study it is aimed developing a Computer Aided Manufacturing (CAM) system, for turned parts in Computer Numerical Controlled turning centre. The system consists of definition of part geometry, producing NC code, program library, setup, graphic simulation, and output modules. Blank and finished part geometry which is essential to the program output, has been generated by part geometry defining module of the system independent of Computer Aided Design (CAD) systems. By defining workpiece material, blank dimensions and unit system information final part geometry has been generated by coordinate values entered from keypad. Here, part geometry defining module of the developed system is introduced. Borland Delphi programming language has been used to develop the system.

___

  • 1. Chang. T.C., Anderson, D.C. and Mitchell, O.R., “QTC-An Integrated Design/ Manufacturing /Inspection System for Prismatic Parts”, Proceedings of ASME Computers in Engineering Conference, Vol. 1, pp. 417-426, 1988.
  • 2. Giusti, F. and Dini, G., “Knowledge Based Approach to Process Planning of Rotational Parts”, Annal of CIRP, Vol. 38, pp. 481-485, 1989.
  • 3. Dereli, T., Filiz, İ., “Optimization of process planning functions by genetic algorithms” Comuters & Industrial Engineering Vol.36, 1999.
  • 4. Esin, A. “Sayısal Denetimli Takım Tezgahları”, sayfa 19-28, Ankara, 1992.
  • 5. Chang, T.C., “Expert Process Plannig For Manufacturing” Addision-Wesley Publishing Co., 1990.
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ