Elektrikli Araçların Şarjı ile Güç Şebekesine Aşırı Yüklenilmesinin Ayrık Denetleyici Sentezi ile Önlenilmesi

Bu çalışma elektrikli araçların şarjı ile güç şebekesine aşırı yüklenilmesinin önlenebilmesi için ayrık denetleyici sentezi yöntemi ile bir modelleme çerçevesi önermektedir; burada, modeller senkron veri akış dilleri ailesi ile sembolik olarak sistematik bir şekilde inşa edilmiştir. Çalışmada, şebekeye aşırı güç yüklenilmesinin önüne geçecek adımların nasıl belirlendiği, belirtilen mevcut sorunun nasıl ayrık olayların kontrol problemi olarak ele alındığı ve nihayetinde ortaya çıkan sentezlenen bir denetleyicinin elektrikli araçlar şebeke şarj yöneticisi olarak nasıl kullanıldığı detaylandırılır. Son olarak, çalışma kapsamında sunulan modelleme ve sentez algoritmaları deneysel bir uygulama ile doğrulanır.

Avoiding Overloading of the Power Grid by Charging Electric Vehicles, by using Discrete Controller Synthesis

This work proposes a modeling framework for avoiding overloading of the power grid by charging electric vehicles, by using discrete controller synthesis. These models are systematically built by using synchronous data-flow languages, as symbolically. In this work, the following problems are detailed. The first phase is to identify the steps to avoid power overload to the grid. And, it is revealed how the plant is handled as a discrete event control problem. Then, the use of the resulted controller as a power-grid charging manager for electric vehicles is presented. Finally, the modeling and synthesis algorithms presented in the study are validated with an experimental application.

___

  • Altisen K., Clodic A., Maraninchi F., and Rutten E. “Using controller synthesis techniques to build property enforcing layers.” in Programming Languages and Systems, 2003, pp, 174–188.
  • Balemi S., Hoffmann G., Gyugyi P., Wong-Toi H., and Franklin G.. “Supervisory control of a rapid thermal multiprocessor.” IEEE Transactions on Automatic Control, vol. 38, no, 7, pp, 1040–1059, 1993.
  • Bellman R. “Dynamic programming and stochastic control processes.” Information and Control, vol. 1, no, 3, pp, 228–239, 1958.
  • Berthier N. and Marchand H. “Deadlock-free discrete controller synthesis for infinite state systems.” in 2015 54th IEEE Conference on Decision and Control (CDC), 2015, pp, 1000–1007.
  • Berthier N. and Marchand H. “Discrete controller synthesis for infinite state systems with reax.” IFAC Proceedings Volumes, vol. 47, no, 2, pp, 46–53, 2014.
  • Cassandras C.G. and Lafortune S. “Supervisory Control” in Introduction to Discrete Event Systems, 2nd ed., New York, Springer, 2007, pp, 133-223.
  • Delaval G., Rutten e., and Marchand H. “Integrating discrete controller synthesis into a reactive programming language compiler.” Discrete Event Dynamic Systems, vol. 23, no 4, pp, 385–418, 2013.
  • Dumitrescu E., Girault A., Marchand H., and Rutten E. “Multicriteria optimal reconfiguration of fault-tolerant real-time tasks.” IFAC Proceedings Volumes, vol. 43, no, 12, pp, 356–363, 2010.
  • Dutertre B. “Spécification et Preuve de Systemes Dynamiques.” Ph.D. dissertation, Rennes University, France, 1992.
  • Holloway L.E., Krogh B.H., and Giua A. “A survey of petri net methods for controlled discrete event systems.” Discrete Event Dynamic Systems, vol. 7, no, 2, pp, 151–190, 1997.
  • Maraninchi F. and Rémond Y. Argos: “An automaton-based synchronous language.” Computer Languages, vol. 27, no, 1, pp, 61–92, 2001.
  • Marchand H. and Borgne M. L. “On the optimal control of polynomial dynamical systems over z/pz.” in 4th International Workshop on Discrete Event Systems, 1998, pp, 385–390.
  • Marchand H. and Samaan M. “Incremental design of a power transformer station controller using a controller synthesis methodology.” IEEE Transactions on Software Engineering, vol. 26, no, 8, pp, 729–741, 2000.
  • Marchand H., Bournai P., Borgne M. L., and Guernic P. L. “Synthesis of discrete-event controllers based on the signal environment.” Discrete Event Dynamic System: Theory and Applications, vol. 10, no, 4, pp, 325–346, 2000.
  • Özbaltan M. “Achieving Power Efficiency in Hardware Circuits with Symbolic Discrete Control.” Ph.D. dissertation, Department of Computer Science, University of Liverpool, Liverpool, UK, 2020.
  • Özbaltan M. and Berthier N. “Exercising symbolic discrete control for designing low-power hardware circuits: an application to clock-gating.” IFAC-PapersOnLine, vol. 51, no, 7, pp, 120–126, 2018.
  • Özbaltan M. and Berthier N. “A case for symbolic limited optimal discrete control: Energy management in reactive data-flow circuits.” IFAC-PapersOnLine, vol. 53, no, 2, pp, 10688–10694, 2020.
  • Ramadge P. and Wonham W. “The control of discrete event systems.” in Proceedings of the IEEE, 1989, pp, 81–98.
  • Zhao J., Chen Y. L., Chen Z., Lin F., Wang C., and Zhang H. “Modeling and control of discrete event systems using finite state machines with variables and their applications in power grids.” Systems & Control Letters, vol. 61, no, 1, pp, 212–222, 2012.
Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi-Cover
  • ISSN: 2687-3729
  • Yayın Aralığı: Yılda 3 Sayı
  • Başlangıç: 2018
  • Yayıncı: Osmaniye Korkut Ata Üniversitesi
Sayıdaki Diğer Makaleler

Yüksek Yükseltici DA-DA Dönüştürücülerin Maksimum Güç Noktası İzleme Performansı Karşılaştırması

Kenan AYTEN, Murat Mustafa SAVRUN

Ring iplik makinesinde manşon (üst silindir) sertliğinin farklı elyaf karışımlarında üretilmiş iplik kalitesine etkisinin araştırılması

Halil İbrahim ERŞAHİN, Yasemin KORKMAZ

Nesnelerin İnterneti Uç Bilişimde Otomatik Kodlayıcı Sinir Ağının Rolüne İlişkin Bir Değerlendirme

Aygül TEKİN KAKIZ, Ar. Gör. Muhammet TALHA KAKIZ, Ramazan COBAN

Elektrikli Araçların Şarjı ile Güç Şebekesine Aşırı Yüklenilmesinin Ayrık Denetleyici Sentezi ile Önlenilmesi

Mete ÖZBALTAN

Destek Vektör Makinelerinin Wi-Fi Tabanlı İç Mekan Lokalizasyon Tespitinde Kullanımı ve Çekirdek Fonksiyon Seçiminin Sınıflandırma Performansına Etkisi

Ebru EFEOĞLU

Kompozit Dolgu ile Restorasyon Yapılmış Dişlerin Basma Yükü Altındaki Mekanik Davranışı

Kadir DOĞAN, İsmail Yasin SÜLÜ

Alüminyum Alaşımlı Tellere Isıl İşlem Uygulanması ve Bu Tellerle Üretilen Tam Alaşımlı AAAC İletkenlerle Geleneksel ACSR Örgülü İletkenlerin Karşılaştırılması

Ebru KISTI, Erhan SAYIN, Necati OCAK, Ümit Galip UNCU, Ahmet FEYZİOGLU

Optik Cam ve Çeşitlerinde Radyasyon Geçirgenliği ve Soğurma Katsayıları

Şeyma BİBER TEMİRCİK

Silifke-Göksu Deltasında Yüzey Suyu-Yer Altı Suyu İlişkisinin Modellenmesi

Mehmet Eyyüp KAVŞUT, Recep YURTAL

Farklı seviye yoğunluk modelleri kullanılarak reaksiyon eşik değerinden 20 MeV’e kadar Paladyum izotoplarının (n,2n), (n,p) ve (n,) tesir kesitlerinin hesaplanması

Halide ŞAHAN, Muhittin ŞAHAN, Eyyup TEL