Sprey Pyrolisis Yöntemiyle SnO2:F Camların Üretimi Optiksel Karakterizasyonun Belirlenmesi ve Kütle Soğurma Katsayısının Hesaplanması

Flor katkılı kalay oksit (SnO2:F) kaplı camlar Sprey piroliz yöntemi kullanılarak üretilmiştir. Bu camların optiksel ve yapısal özellikleri UV ve X -ışını kırınım (XRD) spektrometreleri ile incelenmiştir . Üretilen SnO2:F kaplı camların teorik olarak kütle soğurma katsayıları WinXcom programı kullanılarak hesaplanmıştır. Elde edilen kütle soğurma katsayısı değerleri kullanılarak lineer soğurma katsayıları, etkin atom numarası, yarı değer katman kalınlığı, onda bir değer katman kalınlığı ve ortalama serbest yol değerleri hesaplanmıştır. Bu çalışmada, farklı enerjilerde F katkısına bağlı olarak flor katkılı kalay oksit (SnO2:F) kaplı camların kütle zayıflama katsayıları ve radyasyon etkileşim özellikleri araştırılmıştır.

Production of SnO2:F Glass by Spray Pyrolysis Method and Calculation of Radiation Interaction Properties

F doped tin oxide (SnO2:F) glasses was produced by using spray pyrolysis method. These glasses were investigated optical and structure properties by UV and X-ray diffraction (XRD) spectrometry. The theoretical mass attenuation coefficients of the produced SnO2:F coated glasses were calculated by using the WinXcom program. The linear attenuation coefficients, effective atomic number, half value layer thickness, one tenth layer thickness, mean free path values were calculated using the obtained mass attenuation coefficients. In this study it was investigated that the mass attenuation coefficients and radiation interaction properties for fluorine doped tin oxide (SnO2:F) coated glasses by depending on the F contribution in different energies.

PDF

___

Agar O., Sayyed MI., Akman F., Tekin HO., Kaçal MR. An extensive investigation on gamma ray shielding features of Pd/Ag-based alloys. Nuclear Engineering and Technology 2019; 51(3): 853-859.
Agashe C., Marathe BR., Takwale MG., Bhide VG. Structural properties of SnO2: F films deposited by spray pyrolysis technique. Thin Solid Films 1988; 164: 261-264.
Akkaş A. Determination of the tenth and half value layer thickness of concretes with different densities. Acta Physica Polonica A 2016; 129(4): 770-772.
Aygün B., Şakar E., Korkut T., Sayyed MI., Karabulut A., Zaid MHM. Fabrication of Ni, Cr, W reinforced new high alloyed stainless steels for radiation shielding applications. Results in Physics, 2019; 12: 1-6.
Dutta J., Perrin J., Emeraud T., Laurent JM., Smith A. Pyrosol deposition of fluorine-doped tin dioxide thin films. Journal of Materials Science 1995; 30(1): 53–62.
Elangovan E., Singh MP., Ramamurthi K. Studies on structural and electrical properties of spray deposited SnO2:F thin films as a function of film thickness. Materials Science and Engineering B: Solid-State Materials for Advanced Technology 2004; 113(2): 143–148.
Ersundu AE., Büyükyıldız M., Çelikbilek Ersundu M., Şakar E., Kurudirek M. The heavy metal oxide glasses within the WO3-MoO3-TeO2 system to investigate the shielding properties of radiation applications. Progress in Nuclear Energy 2018; 104: 280–287.
Gaikwad DK., Sayyed MI., Botewad SN., Obaid SS., Khattari ZY., Gawai UP., Afaneh F., Shirshat MD., Pawar PP. Physical, structural, optical investigation and shielding features of tungsten bismuth tellurite based glasses. Journal of Non-Crystalline Solids 2019; 503: 158–168.
Gaikwad DK., Sayyed MI., Obaid SS., Issa SAM., Pawar PP. Gamma ray shielding properties of TeO2-ZnF2- As2O3-Sm2O3 glasses. Journal of Alloys and Compounds 2018; 765: 451–458.
Kaewkhao J., Limsuwan P. Mass attenuation coefficients and effective atomic numbers in phosphate glass containing Bi2O3, PbO and BaO at 662 keV. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 2010; 619(1–3): 295– 297.
Kaur T., Sharma J., Singh T. Thickness optimization of Sn–Pb alloys for experimentally measuring mass attenuation coefficients. Nuclear Energy and Technology 2017; 3(1): 1–5.
Kumar A., Gaikwad DK., Obaid SS., Tekin HO., Agar O., Sayyed MI. Experimental studies and Monte Carlo simulations on gamma ray shielding competence of (30+x)PbO−10WO3− 10Na2O − 10MgO – (40-x)B2O3 glasses. Progress in Nuclear Energy 2020; 119.
Murakami K., Yagi I., Kaneko S. Oriented growth of tin oxide thin films on glass substrates by spray pyrolysis of organotin compounds. In Journal of the American Ceramic Society 1996; 79(10): 2557– 2562.
Obaid SS., Sayyed MI., Gaikwad DK., Pawar PP. Attenuation coefficients and exposure buildup factor of some rocks for gamma ray shielding applications. Radiation Physics and Chemistry 2018; 148: 86–94.
Seenappa L. A study of photon interaction parameters in barium compounds. Annals of Nuclear Energy 2017; 109: 310–317.
Singh H., Sharma J., Singh T. Extensive investigations of photon interaction properties for ZnxTe100-x alloys. Nuclear Engineering and Technology 2018; 50(8): 1364–1371.
Singh K., Singh, H., Sharma, V., Nathuram, R., Khanna, A., Kumar, R., Singh Bhatti, S., & Singh Sahota, H. Gamma-ray attenuation coefficients in bismuth borate glasses. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 2002; 194(1): 1–6.
Singh MP., Sandhu BS., Singh B. Measurement of the effective atomic number of composite materials using Rayleigh to Compton scattering of 279 keV gamma rays. Physica Scripta 2007; 76(4): 281–286.
Sirin M. The effect of titanium (Ti) additive on radiation shielding efficiency of Al25Zn alloy. Progress in Nuclear Energy 2020; 128.