___

• [1] SOLER, L., MACANAS, J., MUNOZ, M., CASADO, J., “Aluminum and Aluminum Alloys as Sources of Hydrogen for Fuel Cell Applications”, Journal of Power Sources, 169, 144-149, 2007. [2] WANG, H.Z., LEUNG, D.Y.C., LEUNG, M.K.H., NI, M., “A Review on Hydrogen Production using Aluminum and Aluminum Alloys”, Renewable and Sustainable Energy Reviews, 13, 845-853, 2009. [3] KOROSH, M., BABAK, A., “Enhancement of Hydrogen Generation Rate in Reaction of Aluminum with Water”, International Journal of Hydrogen Energy, 35, 5227-5232, 2010. [4] RAZAVI-TOUSI, S.S., SZPUNAR, J.A., “Effect of Structural Evolution of Aluminum Powder during Ball Milling on Hydrogen Generation in Aluminum-Water Reaction”, International Journal of Hydrogen Energy, 38, 795-806, 2013. [5] MA, G.L., DAI, H.B., ZHUANG, D.W., XIA, H.J., WANG, P., “Controlled Hydrogen Generation by Reaction of Aluminum/Sodium Hydroxide/Sodium Stannate Solid Mixture with Water”, International Journal of Hydrogen Energy, 37, 5811-5816, 2012. [6] SKROVAN, J., ALFANTAZI, A., TROCZYNSKI, T., “Hydrogen Generation by Accelerating Aluminum Corrosion in Water with Alumina”, World Academy of Science, Engineering and Technology, 55, 325-330, 2011. [7] FAN, M.Q., XU, F., SUN, L.X., “Studies on Hydrogen Generation Characteristics of Hydrolysis of the Ball Milling Al-Based Materials in Pure Water”, International Journal of Hydrogen Energy, 32, 2809-2815, 2007. [8] WANG, W., CHEN, D.M., YANG, K., “Investigation on Microstructure and Hydrogen Generation Performance of Al-Rich Alloys”, International Journal of Hydrogen Energy, 35, 12011-12019, 2010. [9] KIM, M.J., EOM, K.S., KWON, J.Y., CHO, E.A., KWON, H.S., “On-board Hydrogen Production by Hydrolysis from Designed Al-Cu Alloys and the Application of this Technology to Polymer Electrolyte Membrane Fuel Cells”, Journal of Power Sources, 217, 345-350, 2012. [10] TIWARI, A., KESHAV, A., SONI, A.B., “Hydrogen Generation through Aluminum, Aluminum Alloys in Aqueous Solution”, International Journal of Chem. Tech. Research, 5, 1062-1067, 2013. [11] FAN, M.Q., SUN, L.X., XU, F., “Feasibility Study of Hydrogen Generation from the Milled Al-Based Materials for Micro Fuel Cell Applications”, Energy Fuels, 23, 4562-4566, 2009. [12] CZECH, E.B., Hydrogen generation from Aluminum-Water Systems, University of British Columbia, Faculty of Graduate Studies, Materials Engineering, Master of Science Thesis, Canada, 2006.