___

1. Kawalec,A., Wiktor, J. ve Ceglarek, D., "Comparative Analysis of Tooth-Root Strength Using ISO and AGMA Standards in Spur and Helical Gears With FEM-based Verification", Journal of Mechanical Design, Cilt 128, s. 1141-1158,2006.

2. Vimercati, M., "Mathematical Model for Tooth Surfaces Representation of Face-Hobbed Hypoid Gears and Its Application to Contact Analysis and Stress Calculation", Mechanism and Machine Theory, in press, 2006.

3. Buckingham, E., Analytical Mechanics of Gears, McGraw-Hill, New York, A.B.D., 1949.

4. Salamoun, C. ve Suchy, M., "Computation of Helical or Spur Gear Fillets," Mechanism and Machine Theory, Cilt 8,No3,s.305-323,1973.

5. Hefeng, B., Savage, M. ve Knorr, R.J., "Computer Modeling of Rack-Generated Spur Gears", Mechanism and Machine Theory, Cilt 20, s. 351-360,1985.

6. Arıkan, M.A.S., "Determination of Maximum Possible Contact Ratios for Spur Gear Drives with Small Number of Teeth", ASME Design Engineering Technical Conferences, Cilt 82, s. 569-576,1995.

7. Litvin, F.L. ve Fuentes, A., Gear Geometry and Applied Theory, Cambridge University Press, Cambridge, 2004.

8. Tsay, C.-B., "Helical Gears with Involute Shaped Teeth: Geometry, Computer Simulation, Tooth Contact Analysis, and Stress Analysis", ASME Journal of Mechanical Design, Cilt 110, s. 482-491,1988.

9. Yang, S.-C, "Mathematical Model of a Helical Gear with Asymmetric Involute Teeth and Its Analysis", Int J Adv Manuf Techno, Cilt 26, No 5-6, s. 448-456,2005.

10. Tseng, J.-T. ve Tsay, C.-B., "Mathematical Model and Surface Deviation of Cylindrical Gears with Curvilinear Shaped Teeth Cut by a Hob Cutter", Journal of Mechanical Design, Cilt 127, No 5, s. 982-987,2005.

11. Chen, C.-F. ve Tsay, C.-B., "Tooth Profile Design for the Manufacture of Helical Gear Sets with Small Numbers of Teeth", International Journal of Machine Tools and Manufacture, Cilt 45, No 12-13, s. 1531-1541,2005.

12. Litvin, F.L., Lian, Q. ve Kapelevich, A. L., "Asymmetric Modified Gear Drives: Reduction of Noise, Localization of Contact, Simulation of Meshing and Stress Analysis", Computer Methods in Applied Mechanics and Engineering, Cilt 188, s. 363-390,2000.

13. Kapelevich, A.L., "Geometry and Design of Involute Spur Gears with Asymmetric Teeth", Mechanism and Machine Theory, Cilt 35, s. 117-130,2000.

14. Xiaogen, S. ve Donald, R.H., "Characteristic of Trochoids and Their Application to Determining Gear Teeth Fillet Shapes," Mechanism and Machine Theory, 35,s.291304,2000.

15. ISO53 (1974) Cylindrical Gears for General and Heavy Engineering-Basic Rack, International Organization for Standardization, Switzerland

16. Fetvacı, C. ve İmrak, C.E., "Düz Dişlilerde Kavrama Çevriminde Gerilmelerin Değişiminin Sonlu Eleman Metodu ile İncelenmesi", Mühendis ve Makina, Cilt 46, No 545, s. 19-25,2005.