KAPLAMA YÖNTEMİ İLE AHŞAP KOMPOZİT MALZEMELERİN ELEKTROMANYETİK KALKANLAMA ÖZELLİKLERİ

Hızla gelişen teknoloji insan hayatını kolaylaştıran sayısız yenilikleri getirmektedir. Geliştirilen her türlü cihaz ürettiği elektro manyetik alan nedeniyle insan doğasını uzun vadede olumsuz etkilemektedir. Canlı bir organizma 10 kHz - 3 GHz frekans aralığında elektromanyetik alana maruz kaldığında iyon dengesi bozulacak ve etki süresi uzadıkça hücre yenilenmesi olumsuz etkilenecektir. Bu nedenle vakit kaybetmeden bu zararı en aza indirebilecek malzemelerin geliştirilmesi gerekmektedir. Bu amaçla çalışmada günlük hayatta yaygın bir şekilde kullandığımız ahşap kompozit malzemelerin bakır iletken ile kaplanarak 900 MHz, 1800 MHz, 2100 MHz ve 2400 MHz frekanslarında elektromanyetik kalkanlama yeteneği sayısal olarak belirlenmiştir.

ELECTROMAGNETIC SHIELDING PROPERTIES OF WOOD COMPOSITE MATERIALS BY COATING METHOD

Rapidly evolving technology brings innumerable innovations that make human life easier. Because of the electromagnetic field produced by all kinds of device developed, it affects the human nature negatively in the long run. When a living organism is exposed to electromagnetic fields in the frequency range of 10 kHz - 3 GHz, ion balance will be impaired and cell renewal will be negatively affected if the duration of action is prolonged. For this reason, it is necessary to develop materials that can minimize the loss without wasting time. For this purpose, the electromagnetic shielding ability at 900 MHz, 1800 MHz, 2100 MHz and 2400 MHz frequencies was quantified by coating the wood composite materials which we used widely in daily life with copper conductor. 

___

  • Barinaga, M., (1992), Giving Personal Magnetism a Whole New Meaning, Science, 256, 967.
  • Becker, R. O., (1990), Cross Currents: The Promise of Electromedicine, the Perils of Electropollution, Los Angeles, Tarcher.
  • Chohachiro, N., Yaomi, K., Kei, U., Shunichi, S., (1999), Electromagnetic Shielding Particleboard with Nickel-Plated Wood Particles, Journal of Porous Materials, 6(3): 247-254.
  • Clayton, R.P., (2006), Introduction to Electromagnetic Compatibility, John Wiley & Sons, Inc., Hoboken, New Jersey.
  • EPA (1996), Summary and Conclusion of EPA’s EMF Cancer Report, Microwave News, 16(3): 3.
  • Kaya, A. İ., (2015), Atık Kâğıtlardan Geri Kazanılmış Liflerden Kompozit Malzeme Üretim Olanaklarının Araştırılması, Doktora Tezi, Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü.
  • Luo, Z. H., Zhu, J. Q., (2004), Composition of Wire Net and Wood Veneer, China Wood Industry, 14(6): 25-27.
  • Salman, S., (2006), Hormones, Breast Cancer, EMF’s Cellphones, Total Healty, 28(1): 24-25. Yılmaz, R., (2014), Elektromanyetik Kalkanlama Özelliği Olan Malzemeler, EJOVOC: Electronic Journal of Vocational Colleges, 4(1): 136-150.