Cem AYDEMİR, Müberra ESER AYDEMİR, Pınar YILDIRIM

AN EXPERIMENTAL RESEARCH ON HYSTERETIC BEHAVIOR OF RC BEAMS UNDER SIGNIFICANT GRAVITY LOADS

In this study, hysteretic behavior of RC beams with and without significantgravity load effects are investigated. To this purpose, an experimental program iscarried out in which gravity loads are applied by force controlled test procedurewhereas cyclic loads are applied by displacement controlled test procedure. Theresults of tests with gravity load effect are compared with the results of controlspecimens with increasing displacement loading profile. Experimentally observeddamage states and deformation demands are compared with the respective valuesproposed by Turkish Seismic Design Code. It is found that, the loading procedurewith significant gravity load effect leads to the formation of unidirectional plastichinges. Besides, the deformation capacities of the specimens are found to bemuch higher than the code based deformation capacities.

Anahtar Kelimeler:

Damage Limits, Rotation Capacity, Strain Limits, Experimental Load Displacement Relations, Plastic Hinge Length

PDF

___

Turkish Seismic Design Code, Ministry of Public Works and Settlement, Ankara, 2007. EN 1998-3, Eurocode 8: “Design of Structures for Earthquake Resistance-Part 3: Assessment and Retrofitting of Buildings”, Brussels, 2003. ECCS, “Recommended testing procedure for assessing the behaviour of structural steel elements under cyclic loads”, European Convention for Constructional Steelwork, 1985. ACI T1.1-01, “Acceptance criteria for moment frames based on structural testing”, ACI, 2001. ATC Report No. 24, “Guidelines for seismic testing of components of steel structures”, ATC, 1992. Corley, G. W., “Rotational Capacity of Reinforced Concrete Beams”, Journal of the Structural Division, ASCE, V. 92, 121-146, 1966. Baker, A. L. L., and Amarakone, A. M. N., “Inelastic Hyperstatic Frame Analysis”, Flexural Mechanics of Reinforced Concrete, ACI, SP-12, 85-142, 1967. Mattock, A. H., “Rotational Capacity of Hinging Regions in Reinforced Concrete Beams”, Flexural Mechanics of Reinforced Concrete, ACI, SP-12, 143-181, 1967. Eligehausen, R., and Langer, P., “Rotation Capacity of Plastic Hinges and Allowable Moment Redistribution”, CEB Bulletin, No. 175, I7.9-I7.27, 1987. Hillerborg, A., “Fracture Mechanics Concepts Applied to Moment Capacity and Rotational Capacity of Reinforced Concrete Beams”, Engineering Fracture Mechanics, V. 35, 233-240, 1990. Bigaj, A. J., “Structural Dependence of Rotation Capacity of Plastic Hinges in RC Beams and Slabs”, PhD thesis, Delft University, the Netherlands, 1999. Bigaj, A. J., and Walraven, J., “Size Effects on Plastic Hinges of Reinforced Concrete Members”, Heron, V. 47, 53-75, 2002. Ma, S.Y.M., Bertore, V.V, and Popov, E.P., “Experimental and Analytical Studies On Hysteretic Behavior of Reinforced Concrete Rectangular and T-Beams”, Report EERC 76-2, University of California, Berkeley, May 1976, 241 pages. Walker A.F. and Dhakal R.P., “Assessment of material strain limits for defining plastic regions in concrete structures”, Bulletin of The New Zealand Society for Earthquake Engineering, Vol. 42, No. 2, 2009. Gião R., Lúcio V., and Chastre C., “Assessing the behaviour of RC beams subject to significant gravity loads under cyclic loads”, Engineering Structures, Vol. 59, 512-21, 2014. Megget, L. M. and Fenwick, R. C. (1989). “Seismic behaviour of a reinforced concrete portal frame sustaining gravity goads”, Bulletin of NZ Society for Earthquake Engineering, Vol. 22, No. 1 ASCE, (2006). “Seismic Rehabilitation of Existing Buildings,” ASCE Standard ASCE/SEI 41-06, American Society of Civil Engineers, Reston, Virginia. Y.Jiao, S.Kishiki, S.Yamada (2012). “Loading protocols employed in evaluation of seismic behavior of steel beams in weak-beam moment frames”, 2012 15 WCEE LISBOA