Türkiye’de 2008-2018 Döneminde Yapılan Biyomedikal Mühendisliğindeki Araştırmaların Derlemesi
Biyomedikal mühendisliği, teknolojideki hızlı gelişmelerin yardımıyla son 60 yılda en hızlı gelişen araştırma disiplinlerinden biri olmuştur. Biyomedikal mühendisliği Türkiye’de 1970’lerin sonunda ortaya çıkmış, ancak bu alanda yapılan araştırmalar sadece son 15 yılda gelişmeye başlamıştır. Bu derlemenin amacı, Türkiye’de biyomedikal mühendisliği ile ilgili sorunları özetlemek; Türkiye’de biyomedikal alanında yürütülen ana konuları sunmak; ve 2008-2018 yılları arasında yayınlanan ve Türkiye’de biyomedikal mühendisliği alanında araştırma ve geliştirmeye (AR-GE) katkıda bulunan/bulunma potansiyeline sahip olan ve Türk Enstitüleri tarafından yürütülen önde gelen araştırma makalelerini özetlemektir. Bu araştırmalar doku mühendisliği, biyosensörler ve biyomedikal cihazlar konularına ayrılarak incelenmiştir.
A Review of Biomedical Engineering Research in Turkey During the Period 2008-2018
Biomedical engineering is one of the fastest developing research disciplines in the past 60 years with the aid of rapid advances in technology.Biomedical engineering has emerged in Turkey in late 1970s but the research conducted in this area has been developing only in thepast 15 years. The aim of this review is to summarize the problems regarding biomedical engineering in Turkey; to present the main subjectsthat are conducted in biomedical field in Turkey; and to summarize the prominent research papers conducted by Turkish Institutespublished during the period 2008-2018 that contribute and/or have a potential to contribute to research and development (R&D) in biomedicalengineering field in Turkey. These studies were divided into categories of tissue engineering, biosensors and biomedical devices;and summarized in this review.
___
- [1] Bronzino, J.D., (2012). Biomedical Engineering: A Historical
Perspective. In Introduction to Biomedical Engineering, J.D.
Bronzino, J.D. Enderle (ed.), 1-33, doi: 10.1016/B978-0-12-
374979-6.00001-0.
- [2] Saltzman, W.M., (2015). Biomedical engineering: bridging
medicine and technology, Second Edi. Cambridge University
Press.
- [3] Nebeker, F., (2002). Golden accomplishments in biomedical
engineering. IEEE Eng. Med. Biol. Mag., 21:17–47.
- [4] Humpolíčk, P., Radaszkiewicz, K.A., Capáková, Z., Pacherník,
J., Bober, P., Kašpárková, V., Rejmontová, P., Lehocký,
M., Ponížil, P., Stejskal, J., (2018). Polyaniline cryogels: Biocompatibility
of novel conducting macroporous material. Sci.
Rep., 8:1–12.
- [5] Requena-Carrion, J., & Leder, R. S. (2009, September). The
natural history of the engineering in medicine and biology
ociety from a modern perspective. In 2009 Annual International
Conference of the IEEE Engineering in Medicine and Biology
Society (pp. 1086-1088). IEEE.
- [6] Schwan, H.P., (1991). Biomedical engineering: University
of Pennsylvania-from research laboratory to a leader in
educational institutions for bioengineering. IEEE Eng Med.
Biol. Mag., 10:47–49.
- [7] Sun, H.H., (1991). Biomedical engineering: Drexel University-
pioneer in a formal MS degree training program for doctors.
IEEE Eng. Med. Biol. Mag., 10:44–46.
- [8] Çamurcu, A.Y., Alsan, S., (1998). Türkiye’de ve Dünyada Biyomedikal
Mühendislik ve Biyomedikal Cihaz Teknolojisi
Eğitimi. Atatürk Eğitim Fakültesi Eğitim Bilimleri Dergisi,
10: 51–58.
- [9] Sezdi, M., Akan, A., Kalkandelen, C., (2009). Biyomedikal
ve Klinik Mühendisliği Eğitimi ve Ülkemizin Bu Alandaki
İhtiyaçlarının İncelenmesi. EEBB09 Elektrik Elektronik Bilgisayar
Biyomedikal Mühendislikleri Eğitimi 4. Ulus. Sempozyumu.
Eskişehir, Türkiye, 22-24.
- [10] Yükseköğretim Kurulu Yükseköğretim Program Atlası. https://
yokatlas.yok.gov.tr/#. Accessed 29 Apr 2018.
- [11] World University Rankings & Reviews uniRank. https://
www.4icu.org/tr/. Accessed 20 May 2019.
- [12] European Research Area Progress Report 2016. https://
ec.europa.eu/research/era/pdf/era_progress_report2016/era_
progress_report_2016_com.pdf. Accessed 20 March 2018.
- [13] Taşgetiren, S., Yuran, F., Özmen, N., Özkan, N., (2015). Biyomedikal
Ar-Ge 2015: 2015 İtibariyle Türkiye’de Biyomedikal
Teknolojileri Alanında Yapılan Araştırma Faaliyetlerinin
Mevcut Durumu. doi: 10.13140/2.1.3053.9043.
- [14] Bozer, A., Ağırbaş, İ., (2016). Tıbbi Görüntüleme Cihazlarının
Sayısal Durumu ve Kullanımlarının Değerlendirilmesi
– Quantitative Evaluation of the Status and Use of Medical
Imaging Devices. Ankara Üniversitesi Tıp Fakültesi Macmuası,
69(3), 193-201, doi: DOI: 10.1501/Tıpfak_000000943.
- [15] Kiper, M., (2013). Türkiye’de tıbbi cihaz sektörü ve strateji
önerisi. Türkiye Teknol. Geliştirme Vakfı, 1–226.
- [16] Mertler, A.A., Karadoğan, N., Tatarhan, G., (2015). Türkiye’de
Tıbbi Cihazların Sayısal Durumu ve OECD Ülkeleri İle
Karşılaştırmaları. Int. J. Heal. Manag. Strateg. Res. 1:52–70.
- [17] T.C. Sağlık Bakanlığı, (2013). Sağlık İstatistikleri Yıllığı
2013. Sentez Matbaacılık ve Yayıncılık, Ankara.
- [18] Türkiye Istatistik Kurumu Türkiye İstatistik Kurumu. http://
www.tuik.gov.tr/PreTablo.do?alt_id=1084. Accessed 20
March 2018.
- [19] Ministry of Health of the Republic of Turkey. Health Treansformation
Programme.https://sbu.saglik.gov.tr/Ekutuphane/
kitaplar/healthtransformation.pdf. Accessed 20 March 2018.
- [20] Bakker, E., Nuijens, R., Kaplan, D., (2015). The Turkish
life sciences and health sector: Identifying opportunities
to exchange knowledge and products between the Netherlands
and Turkey. https://healthholland.h5mag.com/healthholland/
edit-update_may_2015/internationalisation/1944/
Report_Turkish_Life_Sciences_and_Health_Sector_
March_2015__1_.pdf?nocache=113.117.7427. Accessed 20
July 2018.
- [21] Dundar, M., Akbarova, Y., (2011). Current State of Biotechnology
in Turkey. Curr. Opin. Biotechnol., 22S:S3-S6 doi:
10.1016/j.copbio.2011.05.509.
- [22] Eurostat Research Projects under Framework Programmes
– European Commission. https://ec.europa.eu/eurostat/cros/
content/research-projects-under-framework-programmes-0_
en. Accessed 1 May 2018.
- [23] European Commission – PRESS RELEASES – Press release
– Turkey joins Horizon 2020 research and innovation
programme. http://europa.eu/rapid/press-release_IP-14-631_
en.htm. Accessed 1 May 2018.
- [24] Yaşar, T., (2017). TÜBİTAK Türkiye Adresli Uluslararası Bilimsel
Yayınları Teşvik (UBYT) Programının Değerlendirilmes.
TÜBİTAK Ulakbim.
- [25] SciVerse SCOPUS. www.scopus.com. Accessed 22 January
2019.
- [26] Health European Commission. https://ec.europa.eu/programmes/
horizon2020/en/area/ health. Accessed 1 May 2018.
- [27] Morouço, P., Biscaia, S., Viana, T., Franco, M., Malça, C.,
Mateus, A., Moura, C., Ferreira, F.C., Mitchell, G., Alves,
N.M., (2016). Fabrication of poly(ϵ-caprolactone) scaffolds
reinforced with cellulose nanofibers, with and without the
addition of hydroxyapatite nanoparticles. Biomed. Res. Int.,
1-10, doi: 10.1155/2016/1596157.
- [28] Andreu, V., Mendoza, G., Arruebo, M., Irusta, S., (2015).
Smart dressings based on nanostructured fibers containing
natural origin antimicrobial, anti-inflammatory, and regenerative
compounds. Materials (Basel), 8:5154–5193.
- [29] O’Brien, F.J., (2011). Biomaterials & scaffolds for tissue engineering.
Mater. Today, 14:88–95.
- [30] Langer, R., Tirrell, D.A., (2004). Designing materials for biology
and medicine. Nature, 428:487–492.
- [31] Kulkarni, R.K., Pani, K.C., Neuman, C., Leonard, F., (1966).
Polylactic acid for surgical implants. Arch. Surg., 93:839–
843.
- [32] Vert, M., Mauduit, J., Li, S., (1994). Biodegradation of PLA/
GA polymers: increasing complexity. Biomaterials, 15:1209–
13.
- [33] Weir, N.A., Buchanan, F.J., Orr, J.F., Farrar, D.F., Boyd, A.,
(2004). Processing, annealing and sterilisation of poly-L-lactide.
Biomaterials, 25:3939–3949.
- [34] Zaman, H.U., Islam, J.M.M., Khan, M.A., Khan, R.A.,
(2011). Physico-mechanical properties of wound dressing
material and its biomedical application. J. Mech. Behav. Biomed.
Mater., 4:1369–1375.
- [35] Zorlutuna, P., Yilgör P., Başmanav, F.B., Hasirci, V., (2009).
Biomaterials and tissue engineering research in Turkey: The
METU biomat center experience. Biotechnol. J., 4:965–980.
- [36] Karahaliloǧlu, Z., Demirbilek, M., Şam, M., Erol-Demirbilek,
M., Saǧlam, N., Denkbaş, E.B., (2013). Plasma polymerization-
modified bacterial polyhydroxybutyrate nanofibrillar
scaffolds. J. Appl. Polym. Sci., 128:1904–1912.
- [37] Şen, Ö., Culha, M., (2016). Boron nitride nanotubes included
thermally cross-linked gelatin-glucose scaffolds show improved
properties. Colloids Surfaces B. Biointerfaces 138:41–
49.
- [38] Bhullar, S.K., Rana, D., Lekesiz, H., Bedeloglu, A.C., Ko, J.,
Cho, Y., Aytac, Z., Uyar, T., Jun, M., Ramalingam, M., (2017).
Design and fabrication of auxetic PCL nanofiber membranes
for biomedical applications. Mater. Sci. Eng. C, 81:334–340.
- [39] Yilgor, P., Tuzlakoglu, K., Reis, R.L., Hasirci, N., Hasirci, V.,
(2009). Incorporation of a sequential BMP-2/BMP-7 delivery
system into chitosan-based scaffolds for bone tissue engineering.
Biomaterials, 30:3551–3559.
- [40] Basmanav, F.B., Kose, G.T., Hasirci, V., (2008). Sequential
growth factor delivery from complexed microspheres for
bone tissue engineering. Biomaterials, 29:4195–4204.
- [41] Mavis, B., Demirtaş, T.T., Gümüşderelioğlu, M., Gündüz, G.,
Çolak, Ü. (2009). Synthesis, characterization and osteoblastic
activity of polycaprolactone nanofibers coated with biomimetic
calcium phosphate. Acta Biomater., 5:3098–3111.
- [42] Erol, M., Özyuĝuran, A., Özarpat, Ö., Küçükbayrak, S.,
(2012). 3D Composite scaffolds using strontium containing
bioactive glasses. J. Eur. Ceram. Soc., 32:2747–2755.
- [43] Gunduz, O., Gode, C., Ahmad, Z., Gökçe, H., Yetmez, M.,
Kalkandelen, C., Sahin, Y.M., Oktar, F.N., (2014). Preparation
and evaluation of cerium oxide-bovine hydroxyapatite
composites for biomedical engineering applications. J. Mech.
Behav. Biomed. Mater., 35:70–76.
- [44] Saber-Samandari, S., Alamara, K., Saber-Samandari, S.,
Gross, K.A., (2013). Micro-Raman spectroscopy shows how
the coating process affects the characteristics of hydroxylapatite.
Acta Biomater., 9:9538–9546.
- [45] Deliormanli, A.M., (2014). Preparation and in vitro characterization
of electrospun 45S5 bioactive glass nanofibers. Ceram.
Int., 41:417–425.
- [46] Doǧan, A., Yalvaç, M.E., Şahin, F., Kabanov, A. V., Palotás,
A., Rizvanov, A.A., (2012). Differentiation of human stem
cells is promoted by amphiphilic pluronic block copolymers.
Int. J. Nanomedicine, 7:4849–4860.
- [47] Akin, H., Tugut F., Akin, G.E., Guney, U., Mutaf, B., (2012).
Effect of Er:YAG laser application on the shear bond strength
and microleakage between resin cements and Y-TZP ceramics.
Lasers Med. Sci., 27:333–338.
- [48] Karahaliloglu, Z., Ercan, B., Taylor, E.N., Chung, S., Denkbaş,
E.B., Webster, T.J., (2015). Antibacterial Nanostructured
Polyhydroxybutyrate Membranes for Guided Bone Regeneration.
J. Biomed. Nanotechnol., 11:2253–2263.
- [49] Kaya, M., Baran, T., Mentes, A., Asaroglu, M., Sezen, G., Tozak,
K.O., (2014). Extraction and Characterization of α-Chitin
and Chitosan from Six Different Aquatic Invertebrates.
Food Biophys., 9:145–157.
- [50] Sahiner, N., Sagbas, S., Aktas, N., (2015). Single step natural
poly(tannic acid) particle preparation as multitalented biomaterial.
Mater. Sci. Eng. C, 49:824–834.
- [51] Işiklan, N., Küçükbalci, G., (2012). Microwave-induced synthesis
of alginate-graft-poly(N-isopropylacrylamide) and
drug release properties of dual pH – and temperature-responsive
beads. Eur. J. Pharm. Biopharm., 82:316–331.
- [52] Yucel, D., Kose, G.T., Hasirci, V., (2010). Polyester based
nerve guidance conduit design. Biomaterials, 31:1596–1603.
- [53] Irimia Vladu, M., Troshin, P.A., Reisinger, M., Shmygleva,
L., Kanbur, Y., Schwabegger, G., Bodea, M., Schwödiauer,
R., Mumyatov, A., Fergus, J.W., (2010). Biocompatible and
biodegradable materials for organic field effect transistors.
Adv. Funct. Mater., 20:4069–4076.
- [54] Algi, M.P., Okay, O., (2014). Highly stretchable self-healing
poly(N,N-dimethylacrylamide) hydrogels. Eur. Polym. J.,
59:113–121.
- [55] Akturk, O., Tezcaner, A., Bilgili, H., Deveci, M.S., Gecit,
M.R., Keskin, D. (2011). Evaluation of sericin/collagen
membranes as prospective wound dressing biomaterial. J. Biosci.
Bioeng., 112:279–288.
- [56] Uysal, C.A., Tobita, M., Hyakusoku, H., Mizuno, H., (2012).
Adipose-derived stem cells enhance primary tendon repair:
biomechanical and immunohistochemical evaluation. J.
Plast. Reconstr. Aesthetic Surg., 65:1712–1719.
- [57] Wang, W., Xu, Y., Li, A., Li, T., Liu, M., von Klitzing, R.,
Ober, C.K., Kayitmazer, A..B, Li, L., Guo, X., (2015). Zinc
induced polyelectrolyte coacervate bioadhesive and its transition
to a self-healing hydrogel. Rsc. Adv., 5:66871–66878.
- [58] Eke, G., Mangir, N., Hasirci, N., MacNeil, S., Hasirci, V.,
(2017). Development of a UV crosslinked biodegradable
hydrogel containing adipose derived stem cells to promote
vascularization for skin wounds and tissue engineering. Biomaterials,
129:188–198.
- [59] Mammadov, R., Mammadov, B., Toksoz, S., Aydin,. B, Yagci,
R., Tekinay, A.B., Guler, M.O., (2011). Heparin mimetic
peptide nanofibers promote angiogenesis. Biomacromolecules,
12:3508–3519.
- [60] Uzunalli, G., Mammadov, R., Yesildal, F., Alhan, D., Ozturk,
S., Ozgurtas, T., Guler, M.O., Tekinay, A.B., (2016). Angiogenic
heparin-mimetic peptide nanofiber gel improves regenerative
healing of acute wounds. ACS Biomater. Sci. Eng.,
3:1296–1303.
- [61] Umut, E., Pineider, F., Arosio, P., Sangregorio, C., Corti,
M., Tabak, F., Lascialfari, A., Ghigna, P., (2012). Magnetic,
optical and relaxometric properties of organically coated
gold-magnetite (Au-Fe3O4) hybrid nanoparticles for potential
use in biomedical applications. J. Magn. Magn. Mater.,
324:2373–2379.
- [62] Bürck, J., Aras, O., Bertinetti, L., Ilhan, C.A., Ermeydan,
M.A., Schneider, R., Ulrich, A.S., Kazanci, M., (2018). Observation
of triple helix motif on electrospun collagen nanofibers
and its effect on the physical and structural properties. J.
Mol. Struct., 1151:73–80.
- [63] Aras, O., Kazanci, M., (2015). Production of collagen micro-
and nanofibers for potential drug-carrier systems. J. Enzyme
Inhib. Med. Chem., 30:1013–1016.
- [64] Kazanci, M., (2014). Solvent and temperature effects on
folding of electrospun collagen nanofibers. Mater. Lett.,
130:223–226.
- [65] Unsoy, G., Yalcin, S., Khodadust, R., Gunduz, G., Gunduz,
U., (2012). Synthesis optimization and characterization of
chitosan-coated iron oxide nanoparticles produced for biomedical
applications. J. Nanoparticle Res., 14:964.
- [66] Xu, F., Inci, F., Mullick, O., Atakan, U., Sung, Y., Kavaz,
D., (2012). Release of Magnetic Nanoparticles from Cell –
Encapsulating Biodegradable Nanobiomaterials. ACS nano,
2012, 6.8: 6640-6649.
- [67] Erdal, E., Kavaz, D., Şam, M., Demirbilek, M., Demirbilek,
M.E., Saǧlam, N., Denkbaş, E.B., (2012). Preparation and
characterization of magnetically responsive bacterial polyester
based nanospheres for cancer therapy. J. Biomed. Nanotechnol.,
8:800–808.
- [68] Nazli, C., Ergenc, T.I., Yar, Y., Acar, H.Y., Kizilel, S., (2012).
RGDS-functionalized polyethylene glycol hydrogel-coated
magnetic iron oxide nanoparticles enhance specific intracellular
uptake by HeLa cells. Int. J. Nanomedicine, 7:1903–
1920.
- [69] Tamer, U., Gündoǧdu, Y., Boyaci, I.H., Pekmez, K., (2010).
Synthesis of magnetic core-shell Fe3O4-Au nanoparticle for
biomolecule immobilization and detection. J Nanoparticle
Res., 12:1187–1196.
- [70] Silan, C., Akcali, A., Otkun, M.T., Ozbey, N., Butun, S.,
Ozay, O., Sahiner, N., (2012). Novel hydrogel particles and
their IPN films as drug delivery systems with antibacterial
properties. Colloids Surfaces B. Biointerfaces, 89:248–253.
- [71] Ercan, B., Taylor, E., Alpaslan, E., Webster, T.J., (2011). Diameter
of titanium nanotubes influences anti-bacterial efficacy.
Nanotechnology, 22:295102.
- [72] Demirci, S., Ustaoǧlu, Z., Yilmazer, G.A., Sahin, F., Baç,
N., (2014). Antimicrobial properties of zeolite-X and zeolite-
A ion-exchanged with silver, copper, and zinc against a
broad range of microorganisms. Appl. Biochem. Biotechnol.,
172:1652–1662.
- [73] Khandpur, R.S., (2003). Handbook of biomedical instrumentation,
Second Edi. Tata McGraw-Hill Education.
- [74] Turner, A.P.F., (2013). Biosensors: sense and sensibility.
Chem. Soc. Rev., 42:3184–3196.
- [75] Alwarappan, S., Erdem, A., Liu, C., Li, C-Z., (2009). Probing
the electrochemical properties of graphene nanosheets for biosensing
applications. J. Phys. Chem. C., 113:8853–8857.
- [76] Iverson, N.M., Barone, P.W., Shandell, M., Trudel, L.J., Sen,
S., Sen, F., Ivanov, V., Atolia, E., Farias, E., McNicholas, T.P.,
(2013). In vivo biosensing via tissue-localizable near-infrared-
fluorescent single-walled carbon nanotubes. Nat. Nanotechnol.,
8:873.
- [77] Kaçar, C., Dalkiran, B., Erden, P.E., Kiliç, E., (2014). An amperometric
hydrogen peroxide biosensor based on Co3O4 nanoparticles
and multiwalled carbon nanotube modified glassy
carbon electrode. Appl. Surf. Sci., 311:139–146.
- [78] Canbay, E., Şahin, B., Kiran, M., Akyilmaz, E., (2015). MWCNT-
cysteamine-Nafion modified gold electrode based on
myoglobin for determination of hydrogen peroxide and nitrite.
Bioelectrochemistry, 101:126–131.
- [79] Korkut, S., Keskinler, B., Erhan, E., (2008). An amperometric
biosensor based on multiwalled carbon nanotube-poly (pyrrole)-
horseradish peroxidase nanobiocomposite film for determination
of phenol derivatives. Talanta, 76:1147–1152.
- [80] Çevik, E., Şenel, M., Baykal, A., Abasiyanik, M.F., (2012). A
novel amperometric phenol biosensor based on immobilized
HRP on poly(glycidylmethacrylate)-grafted iron oxide nanoparticles
for the determination of phenol derivatives. Sensors
Actuators, B. Chem., 173:396–405.
- [81] Dalkiran, B., Kaçar, C., Erden, P.E., Kiliç, E., (2014). Amperometric
xanthine biosensors based on chitosan-Co3O4-multiwall
carbon nanotube modified glassy carbon electrode.
Sensors Actuators, B. Chem., 200:83–91.
- [82] Dervisevic, M., Dervisevic, E., Şenel, M., (2018). Design of
amperometric urea biosensor based on self-assembled monolayer
of cystamine/PAMAM-grafted MWCNT/Urease. Sensors
Actuators B. Chem., 254:93–101.
- [83] Karimi-Maleh, H., Tahernejad-Javazmi, F., Atar, N., Yola,
M.L., Gupta, V.K., Ensafi, A.A., (2015). A Novel DNA Biosensor
Based on a Pencil Graphite Electrode Modified with
Polypyrrole/Functionalized Multiwalled Carbon Nanotubes
for Determination of 6-Mercaptopurine Anticancer Drug.
Ind. Eng. Chem. Res., 54:3634–3639.
- [84] Dinçkaya E, Kinik Ö, Sezgintürk MK, Altuĝ Ç, Akkoca A
(2011). Development of an impedimetric aflatoxin M1 biosensor
based on a DNA probe and gold nanoparticles. Biosens.
Bioelectron, 26:3806–3811.
- [85] Yola, M.L., Eren, T., Atar, N., (2014). A novel and sensitive
electrochemical DNA biosensor based on Fe@Au nanoparticles
decorated graphene oxide. Electrochim. Acta, 125:38–
47.
- [86] Yola, M.L., Eren, T., Atar, N., (2014). Molecularly imprinted
electrochemical biosensor based on Fe@Au nanoparticles
involved in 2-aminoethanethiol functionalized multi-walled
carbon nanotubes for sensitive determination of cefexime
in human plasma. Biosens. Bioelectron, 60:277–285.
- [87] Ozalp, V.C., Bayramoglu, G., Erdem, Z., Arica, M.Y., (2015).
Pathogen detection in complex samples by quartz crystal
microbalance sensor coupled to aptamer functionalized core-
shell type magnetic separation. Anal Chim. Acta, 853:533–
540.
- [88] Parlak, O., İncel, A., Uzun, L., Turner, A.P.F., Tiwari, A.,
(2017). Structuring Au nanoparticles on two-dimensional
MoS2 nanosheets for electrochemical glucose biosensors. Biosens.
Bioelectron., 89:545–550.
- [89] Koskun, Y., Şavk, A., Şen, B., Şen, F., (2018). Highly sensitive
glucose sensor based on monodisperse palladium nickel/
activated carbon nanocomposites. Anal. Chim. Acta,
1010:37–43.
- [90] Şenel, M., Nergiz, C., (2012). Novel amperometric glucose
biosensor based on covalent immobilization of glucose oxidase
on poly(pyrrole propylic acid)/Au nanocomposite. Curr.
Appl. Phys., 12:1118–1124.
- [91] Kilic, T., Topkaya, S.N., Ariksoysal, D.O., Ozsoz, M., Ballar,
P., Erac, Y., Gozen, O., (2012). Electrochemical based detection
of microRNA, mir21 in breast cancer cells. Biosens. Bioelectron,
38:195–201.
- [92] Kilic, T., Topkaya, S.N., Ozsoz, M., (2013). A new insight
into electrochemical microRNA detection: A molecular caliper,
p19 protein. Biosens. Bioelectron. 48:165–171.
- [93] Atar, N., Eren, T., Yola, M.L., (2015). A molecular imprinted
SPR biosensor for sensitive determination of citrinin in red
yeast rice. Food. Chem., 184:7–11.
- [94] Kesik, M., Akbulut, H., Söylemez, S., Cevher, Ş.C., Hızalan,
G., Udum, Y.A., Endo, T., Yamada, S., Çırpan, A., Yağcı, Y.,
(2014). Synthesis and characterization of conducting polymers
containing polypeptide and ferrocene side chains as ethanol
biosensors. Polym. Chem., 5:6295–6306.
- [95] Yilmaz Ö, Demirkol DO, Gülcemal S, Kilinç A, Timur S, Çetinkaya
B (2012). Chitosan-ferrocene film as a platform for
flow injection analysis applications of glucose oxidase and
Gluconobacter oxydans biosensors. Colloids Surfaces B. Biointerfaces,
100:62–68.
- [96] Perk, O.Y., Şeşen, M., Gozuacik., D., Koşar, A., (2012). Kidney
stone erosion by micro scale hydrodynamic cavitation
and consequent kidney stone treatment. Ann. Biomed. Eng.,
40:1895–1902.
- [97] Oflaz, H., Baran, O., (2014). A new medical device to measure
a stiffness of soft materials. Acta Bioeng. Biomech.,
16:125–131.
- [98] Yen, P-L., Chen, D-R., Yeh, K-T., Chu, P-Y. (2008). Lateral
exploration strategy for differentiating the stiffness ratio of
an inclusion in soft tissue. Med. Eng. Phys., 30:1013–1019.
- [99] Subasi, A., Gursoy, M.I., (2010). EEG signal classification
using PCA, ICA, LDA and support vector machines. Expert
Syst. Appl., 37:8659–8666.
- [100] Acar, E., Dunlavy, DM., Kolda, T.G., Mørup, M., (2011).
Scalable tensor factorizations for incomplete data. Chemom.
Intell. Lab. Syst., 106:41–56.
- [101] Ince, T., Kiranyaz, S., Gabbouj, M., (2009). A generic and robust
system for automated patient-specific classification of
ECG signals. IEEE Trans. Biomed. Eng., 56:1415–1426.
- [102] Kiranyaz, S., Ince, T., Gabbouj, M., (2016). Real-Time Patient-
Specific ECG Classification by 1-D Convolutional Neural
Networks. IEEE Trans. Biomed. Eng., 63:664–675.
- [103] Tabar, Y.R., Halici, U., (2016). A novel deep learning approach
for classification of EEG motor imagery signals. J. Neural
Eng., 14:16003.
- [104] Alkan, A., Günay, M., (2012). Identification of EMG signals
using discriminant analysis and SVM classifier. Expert. Syst.
Appl., 39:44–47.
- [105] Dincer, F., Karaaslan, M., Unal, E., Sabah, C., (2013). Dual-
band polarization independent meta-material absorber based
on omega resonator and octastarstrip configuration. Prog.
Electromagn. Res., 141:219–231.
- [106] Sabah, C., Dincer, F., Karaaslan, M., Unal, E., Akgol, O., Demirel,
E., (2014). Perfect metamaterial absorber with polarization
and incident angle independencies based on ring and
cross-wire resonators for shielding and a sensor application.
Opt. Commun., 322:137–142.
- [107] Ergen, B., Tatar, Y., Gulcur, H.O., (2012). Time-frequency
analysis of phonocardiogram signals using wavelet
transform: A comparative study. Comput. Methods, Biomech.
Biomed. Engin., 15:371–381.
- [108] Gurun, G., Zahorian, J.S., Sisman, A., Karaman, M., Hasler,
P..E, Degertekin, L.F., (2012). An analog integrated circuit
beamformer for high-frequency medical ultrasound imaging.
IEEE Trans. Biomed. Circuits Syst. 6:454–467.
- [109] Kerse, C., Kalaycıoğlu, H., Elahi, P., Çetin, B., Kesim, D.K.,
Akçaalan, Ö., Yavaş, S., Aşık, M.D., Öktem, B., Hoogland,
H., (2016). Ablation-cooled material removal with ultrafast
bursts of pulses. Nature, 537:84.
- [110] Kucukgul, C., Ozler, S.B., Inci, I., Karakas, E., Irmak, S., Gozuacik,
D., Taralp, A., Koc, B., (2015). 3D bioprinting of biomimetic
aortic vascular constructs with self-supporting cells.
Biotechnol Bioeng 112:811–821.