___

• 1. Gür A.K. (2006) Aşınma Mekanizmaları, F.Ü. Fen Bilimleri Ens. Doktora Semineri, Elazığ
• 2. Chiou, Y.C., Kato, K., and Kayaba, T. (1985), Effect of Normal Stiffness in Loading System on Wear of Carbon Steel—part 1:Severe-Mild Wear Transition, ASME, J. Tribology, 107, 491-495.
• 3. Cho, S.J., Hockey, B.J., and Lawn, B.R. (1989), Grain-size and R-curve Effects in the Abrasive Wear of Alumina, J. Am. Ceram. Soc., 72, 7, 1949-1952.
• 4. Archard, J.F. (1953), Contact and Rubbing of Flat Surfaces, J. Appl. Phys., 24, 981-988.
• 5. Bayer, R.G. (1994), Mechanical Wear Prediction and Prevention, Marcel Dekker, New York, 280.
• 6. Burwell, J.T. (1957/58), Survey of Possible We-ar Mechanisms, Wear, 1, 119–141.
• 7. Özel, S.(2004) Cu-Sn-Zn-Al Bronz Alaşımlı Yü-zeyine Ferromangan Kaplamasının Aşınma Di-rencine Etkisinin Deneysel Olarak Araştırılması, Yüksek Lisans Tezi F.Ü. Fen Bil.Enst. Elazığ
• 8. Koji KATO, Koshi ADACHİ, Chapter 7, Wear Mechanism. Modern Tribology Handbook
• 9. Koç, R;Mutlu, İ 2005) Recep KOÇ, İbrahim MUTLU(2005) Poli-Oksi-Metilen (Pom) Ve Kompozitlerinin Abrasiv Aşınma Davranışları, Teknoloji Dergisi, Sayı2, 199–205
• 10. Y. Sahin, ;(2005) Optimal testing parameters on the wear behaviour of various steels; Materials and Design ..455-460
• 11. Hokkirigawa, K. and Kato, K. (1988), An Expe-rimental and Theoretical İnvestigation of Ploug-hing, Cuttingand Wedge Formation During Ab-rasive Wear, Tribology Int., 21, 1, 51-57.
• 12. Khruschov, M.M. (1974), Principles of Abrasive Wear, Wear, 28, 69–88.
• 13. Rabinowicz, E. (1980), Wear Coefficients – Me-tals, Wear Control Handbook, Peterson, M.B. and Winer, W.O. (Eds.), ASME, 475.
• 14. Challen, J.M. and Oxley, P.L.B. (1979), An Explanation of The Different Regimes of Friction and Wear Using Asperity Deformation Models, Wear, 53, 229–243.
• 15. Xianqiang Pei, Qihua Wang, Jianmin Chen; (2005) Tribological responses of Phenolphtha-lein Poly (ether sulfone) on proton irradiation; Elsevier, Wear, 719-724
• 16. Lundberg, G. and Palmgren, A. (1952), Dynamic Capacity of Roller Bearings, Ingenicorsrenten-Skapsakademiens,Nr. 210.
• 17. Weibull, W. (1930), A Statistical Theory of The Strength of Materials, IVA Handlinger, (Royal Swedish Academy of Engineering Sciences, Proceedings) Nr. 151.
• 18. Dufrane, K.F. and Glaeser, W.A. (1976), Rolling-Contact Deformation of MgO Single Crystals, Wear, 37,21–32.
• 19. Challen, J.M., Oxley, P.L.B., and Hockenhull, B.S. (1986), Prediction of Archard’s Wear Coefficient For Metallic Sliding Friction Assuming a Low Cycle Fatigue Wear Mechanism, Wear, 111, 275-288.
• 20. Eren, H. (2005) Ferritik Paslanmaz Çeliğin Ko-rozyon Davranışına Karbür Yapıcı Alaşım Ele-mentlerinin Etkilerinin İncelenmesi, Doktora Tezi F.Ü. Fen Bil. Enst. Elazığ
• 21. X.Y. Wang, D.Y. Li; (2005) Application of an electrochemical scratch technique to evaluate contributions of mechanical and electrochemical attacks to corrosive wear of materials, Elsevier; Waer; 1490-1496
• 22. Quinn, T.F.J. (1987), in Proc. Int. Conf. on Tribology-Friction, Wear and Lubrication, Inst. Mech. Engrs.Conf. Series, 253–259.
• 23. Fischer, T.E. and Tomizawa, H. (1985), Interaction of Tribochemistry and Microfracture in the Frictionand Wear of Silicon Nitride, Wear, 105, 29–45.
• 24. Kitaoka, S., Tsuji, T., Yamaguchi, Y., and Kas-hiwagi, K. (1997), Tribochemical Wear Theory of non-oxide Ceramics in High-Temperature And High-Pressure Water, Wear, 205, 40-46.