Gözde PİRKOCA, Aysen H. KİNNA, Nuran ULUSOY, Yıldırım H. BAĞIŞ

Farklı sistemlerle bitirme ve cila uygulanan üç kompozit rezinin yüzey pürüzlülüğü

Bu çalışmanın amacı; nano-dolduruculu bir kompozit Filtek Supreme XT , bir nano-seramik kompozit CeramX ve bir nano-hibrit kompozitin Grandio yüzey pürüzlülüğü üzerine iki farklı bitirme frezi ve iki farklı cila sisteminin etkisini araştırmaktır. Her kompozit rezin için paslanmaz çelik kalıplar kullanılarak disk şeklinde 5 mm çap-2 mm kalınlık 35 örnek hazırlandı. Örnekler bitirme ve cila prosedürlerine göre rastgele gruplara ayrıldı. Grup 1: Şeffaf bant control , Grup 2: Elmas bitirme frezleri, Grup 3: Elmas bitirme frezleri +Optidisc, Grup 4: Elmas bitirme frezleri +HiLuster, Grup 5: Tungsten karbit frez, Grup 6: Tungsten karbit frez +Optidisc, Grup 7: Tungsten karbit frez +Hi-Luster. Tüm örneklerin ortalama yüzey pürüzlülük değerleri Ra profilometre ile ölçüldü. Bulguların istatistiksel değerlendirmeleri P

Anahtar Kelimeler:

Kompozit rezin, Bitirme/cila teknikleri, Yüzey pürüzlülüğü

Surface Roughness of Three Resin Composites Finished and Polished with different Systems

The aim of this study was to evaluate the effect of two different finishing tecniques and two different polishing procedures on the surface roughness of one nano-filled composite Filtek Supreme XT , one nano-ceramic composite CeramX and one nano-hybrid composite Grandio . 35 disk-shaped specimens 5 mm diameter and 2 mm thickness were made for each composite resin by using stainless stell mold. Specimens were randomly divided into seven finishing and polishing procedures as follow: Group 1: Mylar strip as control , Group 2: Diamond finishing burs, Group 3: Diamond finishing burs+Optidisc, Group 4: Diamond finishing burs+Hi-Luster, Group 5: Tungsten carbide burs, Group 6: Tungsten carbide burs+Optidisc, Group 7: Tungsten carbide burs+Hi-Luster. A profilometer device was used to measure the average surface roughness Ra of all the specimens. Results were statistically analysed by using Two way ANOVA and Duncan test at p

Keywords:

Composite resin, Finishing/polishing procedures, Surface roughness.,

PDF

___

Koh R, Neiva G, Dennison J, Yaman P. Finishing systems on the final surface roughness of composites. J Contemp Dent Pract. 2008;9:138-45.
Stoddard JW, Johnson GH. An evaluation of polishing agents for composites resins. J Pros Dent. 1991;65:491-5.
Mitra SB, Wu D, Holmes BN. An application of nanotechnology in advanced dental 2003;134:1382-90. Am Dent Assoc.
Jefferies SR. Abrasive finishing and polishing in restorative dentistry: a state-of-the- art review. Dent Clin North Am. 2007;51:379- 97.
Weitman RT, Eames WB. Plaque accumulation on composite surfaces after various finising procedures. J Am Dent Assoc. 1975;91:101-6.
Jones CS, Billington RW, Pearson GJ. The in vivo perception of roughness of restorations. Br Dent J. 2004;196:42-5.
Ergücü Z, Türkün LS. Surface roughness of novel resin composites polished with 2007;32:185-92. Oper Dent.
Yap AU, Wong ML, Lim AC. The effect of polishing systems on microleakage of tooth-coloured restoratives. Part 2: composite and polyacid-modified composite resins. J Oral Rehabil. 2000;27:205-10.
Marghalani HY. Effect of finishing /polishing systems on the surface roughness of novel posterior composites. J Esthet Restor Dent. 2010;22:127-38.
Korkmaz Y, Ozel E, Attar N, Aksoy G. The influence of one-step polishing systems on the surface roughness and microhardness of nanocomposites. Oper Dent. 2008;33:44-50.
Stanford WB, Fan PL, Wozniak WT, Stanford JW. Effect of finishing on color and gloss of composites with different fillers. J Am Dent Assoc. 1985;110:211-3.
Türkün LS, Türkün M. The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials. Oper Dent. 2004;29:203-11.
Attar N. The effect of finishing and polishing procedures on the surface roughness of composite resin materials. J Contemp Dent Pract. 2007;8:27-35.
Baseren M. Surface roughness of nanofill and nanohybrid composite resin and ormocer-based materials after several finishing and polishing procedures. J Biomater Appl. 2004;19:121-34.
Pedrini D, Candido MSM, Rodriques AL. Analysis of surface roughness of glass- ionomer cements and compomer. J Oral Rehab. 2003;30:714-9.
Jefferies SR. The art and science of abrasive finishing and polishing in restorative dentistry. Dent Clin North Am. 1998;42:613-27.
Yap AU, Yap SH, Teo CK, Ng JJ. Finishing/polishing compomer restoratives: effectiveness of one- step systems. Oper Dent. 2004;29:275-9. and
Yap AU, Yap SH, Teo CK, Ng JJ. Comparison of surface finish of new aesthetic restorative materials. Oper Dent. 2004;29:100- 4.
Jung M, Bruegger H, Klimek J. Surface geometry of three packable and one hybrid Dent. 2003;28:816-24. after polishing. Oper
Jung, M. Surface roughness and cutting efficiency of composite finishing instruments, Oper Dent. 1997;22: 98–104.
Ferracane, J.L., Condon, J.R. and Mitchem, J.C. Evaluation of subsurface defects created during the finishing of composites, J Dent Res. 1992;71: 1628-32.
Jung M, Sehr K, Klimek J. Surface texture of four nanofilled and one hybrid composite Dent. 2007;32:45-52. finishing. Oper
Schirrmeister JF, Huber K, Hellwig E, Hahn P. Two-year evaluation of a new nano- ceramic restorative material. Investig. 2006;10:181-6. Clin Oral
Marigo L, Rizzi M, La Torre G, Rumi G. 3-D surface profile analysis: different finishing methods for resin composites. Oper Dent. 2001;26:562-8.
Tjan AH, Chan CA. The polishability of Dent. 1989;61:138-46. J Prosthet 26.
Weitman RT, Eames WB.accumulation on composite surfaces after Plaque of Streptococcus mutans HS-6 on composite resins. Dent Mater. 1985;1:225-7.