Kayma Dairesi Göçme Mekanizması İçin Plastik Stabilite Cözümü

Bir zemin kutlesinde ortaya cıkan gocme ve kayma hareketinin incelenmesi stabilite problemleri olarak isimlendirilir. Bu calısmada sev gocmesinin olustuğu kayma dairesi mekanizması cozulmustur. Mohr gerilme dairesi ve plastisite teorisinin alt sınır gocme kriterine gore yontemin esas davranısının aktif, rotasyonel kayma ve pasif davranıs bölgelerinden olustuğu kabulu yapılmıstır ve bu calısma bir sevde guvenlik sayısının belirlenmesinde geometrik ve mukavemet parametrelerinin etkisini tanımlayabilmek acısından yararlıdır. Calısmadan elde edilebilecek en onemli fayda ise dairesel kayma mekanizmasına esas olan gerilme davranısının cozumudur.

A Plastic Stability Solution For Slip Circle Failure Mechanism

The investigation of collapsing and sliding action on a soil mass is named as stability problem. In this study, the slide mechanism of a slope is solved by stress compatibility conditions in the sliding blocks. The lower bound collapse criteria of plasticity theory and drawing to Mohr stress circles according to this criteria the solutions are made. It is assumed that stress transfer during sliding occurs between active rotational slip and passive blocks. This study is useful to define the effect of geometric and strength parameters on determining the factor of safety of a slope.

___

  • [1] W.F. Chen ve C.R. Scawthorn, “Limit Analysis and Limit Equilibrium Solutions in Soil Mechanics”, Soils and Foundations, No.3, pp.13–49, 1970.
  • [2] H.Y. Fang ve T.J. Hirst, “Application of Plasticity Theory to Slope Stability Problems”, Highway Research Record, No.323, pp.26–38, 1970.
  • [3] W.F. Chen, “Plasticity in Soil Mechanics and Landsildes”, Journal Engineering Div. ASCE, No.106, pp.443–464,1980.
  • [4] N.Snitbhan, W.F. Chen ve H.Y. Fang, “Slope Stability of Layered Soils”, Proc. 4th Southeast Asia Conference on Soil Engineering, 1975, Malaysia, pp.11–26.
  • [5] E. Mizuno ve W.F. Chen, “Analysis of Soil Response with Different Plasticity Models”, In: R.N. Yong ve E.T. Selig (Editors), Limit Equilibrium, Plasticity and Generalised Stress – Strain Applications in Geotechnical Engineering. ASCE, New York, N.Y., pp.115–138, 1980.
  • [6] X.J. Zhang ve W.F. Chen, “Stability Analysis of Slopes”, Journal Engineering Division, No.106, pp.591–602, 1987.
  • [7] B. Trak, P. La Rochelle, F. Tavenas, S. Leroueil ve M. Roy, “A New Approach to the Stability Analysis of Embankments on Sensitive Clays”, Canadian Geotechnical Journal, No.4, pp.591–602, 1980.
  • [8] R.P.Chapuis, “New Stability Method for Embankments on Clay Foundations”, Canadian Geotechnical Journal, pp.44–48, 1982.
  • [9] G. Yılmaz, “Yumusak Kil Temelli Toprak Dolguların Tasarımı (Birlestirilmis Plastik Denge-Gerilme Đzi Çözümü)”, Doktora Tezi, Osmangazi Üniversitesi, Fen Bilimleri Enstitüsü, Đnsaat Mühendisliği, Eskisehir, 1994.
  • [10] T. Tutuk, “Zemin Tabakalanması ve Yer Altı Su Seviyesi Değisiminin Sev Stabilitesi Üzerine Etkisi”, Yüksek Lisans Tezi, Anadolu Üniversitesi, Fen Bilimleri Enstitüsü Đnsaat Mühendisliği, Eskisehir, 2004.
  • [11] J.H. Atkinson,. “An Introduction to Applications of Critical State Mechanics”, Foundations and Slopes, Mc Graw Hill, England, 1981.