Power Consumption Analysis of a Wi-Fi-based IoT Device

The Internet of Things is a dynamic global network infrastructure consisting of interconnected smart devices with identification, sensing, data processing,and communication capabilities. It provides an intelligent ecosystem for the information society by enabling advanced services, standards, andplatforms. Due to the growing market for smart devices with IP connectivity, several companies introduced low power Wi-Fi products optimized forIoT applications. Because Wi-Fi has established itself as one of the most popular wireless network technologies offering connectivity, has brought manyadvantages for IP enabled IoT devices (e.g., high data rate, mobility, built-in IP-network compatibility, easy integration with existing infrastructure), andhas generated momentum in the IoT industry. However, since Wi-Fi was originally developed for high bandwidth applications targeting the consumerelectronics market, it was not considered as a feasible technology for IoT applications. Wi-Fi-based IoT devices are typically battery-operated. Theirwireless communication modules consume a relatively high amount of energy in case data needs to be sent a long distance, thus battery lifetimerequirement for these devices remains a primary concern. Such small devices should transmit at high efficiency to conserve battery power, and theyare required to sustain reliable operation for years on batteries even in the presence of heavy interference. Considering the limitations of battery powerand long operational lifetime, the development of energy-efficient systems for these devices is an important issue. In this study, we analyzed the powerconsumption of a Wi-Fi IoT device deployed in field settings, where power infrastructure is inaccessible. We investigated how the device’s Wi-Fi moduleinfluences the power consumption in the IoT environment. In our experimental results, we observed that Wi-Fi-based IoT devices are still power-hungryand can operate well with low power consumption by using energy-optimized power modes..

PDF

___

1. M. E. Yuksel, "The design and implementation of a batteryless wireless embedded system for IoT applications", Electrica, vol. 19, no. 1, pp. 1-11, 2019. [CrossRef]

2. P. Silva, N. T. Almeida, R. Campos, "A comprehensive study on enterprise Wi-Fi access points power consumption", IEEE Access, vol. 7, pp. 96841-67, 2009. [CrossRef]

3. M. Bassoli, V. Bianchi, I. De Munari, P. Ciampolini, "An IoT approach for an AAL Wi-Fi-based monitoring system", IEEE Transactions on Instrumentation and Measurement, vol. 66, no. 12, pp. 3200-9, 2017. [CrossRef]

4. W. Wang, Y. Chen, L. Wang, Q. Zhang, "Sampleless Wi-Fi: bringing low power to Wi-Fi communications", IEEE/ACM Transactions on Networking, vol. 25, no. 3, pp. 1663-72, 2017. [CrossRef]

5. K. S. Low, M. C. R. Talampas, "Wireless sensor networks for intelligent transportation applications: A survey", In Industrial Wireless Sensor Networks: Applications, Protocols, and Standards, Boca Raton, FL, USA, CRC Press, 2013, pp. 47-77.

6. V. Tsiatsis, S. Karnouskos, J. Holler, D. Boyle, C. Mulligan, "Internet of Things: Technologies and Applications for a New Age of Intelligence", Academic Press, London, UK, 2019.

7. S. Greengard, "The Internet of Things", MIT Press, Cambridge, MA, USA, 2015. [CrossRef]

8. M. Alioto, "Enabling the Internet of Things: From Integrated Circuits to Integrated Systems", Springer, Cham, Switzerland, 2017. [CrossRef]

9. S. Li, L. Da Xu, S. Zhao, "The internet of things: a survey", Information Systems Frontiers, vol. 17, no. 2, pp. 243-59, 2015. [CrossRef]

10. P. Patel, D. Cassou, "Enabling high-level application development for the Internet of Things", Journal of Systems and Software, vol. 103, pp. 62-84, 2015. [CrossRef]

11. A. Al-Fuqaha, M. Guizani, M. Mohammadi, M. Aledhari, M. Ayyash, "Internet of things: a survey on enabling technologies, protocols, and applications", IEEE Communications Surveys & Tutorials, vol. 17, no. 4, pp. 2347-76, 2015. [CrossRef]

12. Z. Abbas, W. Yoon, "A survey on energy conserving mechanisms for the internet of things: Wireless networking aspects", Sensors, vol. 15, no. 10, pp. 24818-47, 2015. [CrossRef]

13. K. Mekki, E. Bajic, F. Chaxel, F. Meyer, "A comparative study of LPWAN technologies for large-scale IoT deployment", ICT Express, vol. 5, no.1, pp. 1-7, 2019. [CrossRef]

14. S. L. Tsao, C.-H. Huang, "A survey of energy efficient MAC protocols for IEEE 802.11 WLAN", Computer Communications, vol. 34, no. 1, pp. 54-67, 2011. [CrossRef]

15. D. Thomas, R. McPherson, J. Irvine, "Power analysis of local transmission Technologies", In 12th Conference on Ph.D. Research in Microelectronics and Electronics, Lisbon, Portugual, 2016. [CrossRef]

16. D. Thomas, R. McPherson, G. Paul, J. Irvine, "Optimizing power consumption of Wi-Fi inbuild IoT device: An MSP430 processor and an ESP-03 chip provide a power-efficient solution", IEEE Consumer Electronics Magazine, vol. 5, no. 4, pp. 92-100, 2016. [CrossRef]

17. L. M. Feeney, M. Nilsson, "Investigating the energy consumption of a wireless network interface in an ad hoc networking environment", In 20th Annual Joint Conference of the IEEE Computer and Communications Society (IEEE INFOCOM), Alaska, USA, 2001, pp. 1548-57.

18. A. D. Muller, A. Rust, "Low-power wireless: what is possible with WiFi?", In Wireless Congress: Systems & Applications, Munich, Germany, 2015.

19. B. Kellogg, V. Talla, S. Gollakota, J. R. Smith, "Passive Wi-Fi: bringing low power to Wi-Fi transmissions", In 13th Usenix Conference on Networked Systems Design and Implementation, Santa Clara, CA, USA, 2016, pp. 151-64.

20. S. Folea, M. Ghercioiu, "Ultra-low power Wi-Fi tag for wireless sensing", In IEEE International Conference on Automation, Quality and Testing, Robotics, Cluj-Napoca, Romania, 2008, pp. 247-52. [CrossRef]

21. F. Lu, G. M. Voelker, A. C. Snoeren, "SloMo: Downclocking WiFi communication", In 10th USENIX Symposium on Networked Systems Design and Implementation, Lombard, IL, USA, 2013, pp. 255-8.

22. E. Morin, M. Maman, R. Guizzetti, A. Duda, "Comparison of the device lifetime in wireless networks for the Internet of Things", IEEE Access, vol. 5, pp.7097-114, 2017. [CrossRef]

23. S. Tozlu, M. Senel, W. Mao, A. Keshavarzian, "Wi-Fi enabled sensors for internet of things: a practical approach", IEEE Communications Magazine, vol. 50, no. 6, pp. 134-43, 2012. [CrossRef]

24. C. A. Trasvina-Moreno, A. Asensio, R. Casas, R. Blasco, A. Marco, "WiFi sensor networks: a study of energy consumption", In IEEE 11th International Multi-Conference on Systems, Signals & Devices, Barcelona, Spain, 2014, pp. 1-6. [CrossRef]

25. FiPy, Available from: URL: https://pycom.io/product/fipy/.

26. Espressif ESP32 SoC, Available from: URL: https://www.espressif.com.

27. TI CC3100, Available from: URL: http://www.ti.com.

28. Microchip ATWINC1500, Available from: URL: https://www.microchip.com.

29. Microchip RN171, Available from: URL: https://www.microchip.com.

30. Telit GS2200, Available from: URL: https://www.telit.com.

31. Espressif ESP8266, Available from: URL: https://www.espressif.com.

32. TI CC3235, Available from: URL: http://www.ti.com.

33. Telit WL865E4-P, Available from: URL: https://www.telit.com.