Pınar CAKIR HATIR, Özlem YALCIN CAPAN

Comparison of Crosslinker Types and Initiation Systems of Thermoresponsive PNIPAM Hydrogels

Thermoresponsive hydrogels are three-dimensional polymer networks which undergo conformational changes in aqueous media depending on the external temperature. As the lower critical temperature (LCST) is close to the body temperature, poly(N-isopropylacrylamide) (PNIPAM) is the main thermoresponsive hydrogel used for biomedical applications. Below LCST, PNIPAM hydrogels swell in aqueous media, above LCST they become insoluble and shrink. This behavior makes it possible to design drug release systems controlled by external temperature. Swelling/shrinking response of PNIPAM hydrogel depends on several factors such as crosslinker type, crosslinking density, hydrophobic/hydrophilic balance and initiator type. In this study, the effects of the initiation system and the crosslinker type on different thermoresponsive hydrogels were compared. For this purpose, thermoresponsive hydrogels were synthesized by using ethylene glycol dimethylacrylate (EGDMA) and N,N′-ethylene bisacrylamide (EBAM) as crosslinkers via photo and thermal initiation systems. The hydrogels were characterized by scanning electron microscope (SEM) and FTIR spectroscopy. Effects of the initiation system and the crosslinker type on the release, swelling behavior, morphology and the biocompatibility behavior of the hydrogels were investigated. The hydrogels synthesized with EBAM demonstrated more promising results compared to the one synthesized EGDMA. It was concluded that poly(EBAM-co-NIPAM)-P has the highest swelling ratio and poly(EBAM-co-NIPAM)-T is the most biocompatible hydrogel. In terms of release characteristics, there was not a significant difference between the hydrogels, even though their swelling characteristics differ.

Anahtar Kelimeler:

Sıcaklığa duyarlı hidrojeller, fotopolimerizasyon, termal polimerizasyon, N-izopropilakrilamid

Sıcaklığa Duyarlı PNIPAM Hidrojellerde Çapraz Bağlayıcı ve Başlatıcı Sisteminin Karşılaştırılması

Thermoresponsive hydrogels are three-dimensional polymer networks which undergo conformational changes in aqueous media depending on the external temperature. As the lower critical temperature (LCST) is close to the body temperature, poly(N-isopropylacrylamide) (PNIPAM) is the main thermoresponsive hydrogel used for biomedical applications. Below LCST, PNIPAM hydrogels swell in aqueous media, above LCST they become insoluble and shrink. This behavior makes it possible to design drug release systems controlled by external temperature. Swelling/shrinking response of PNIPAM hydrogel depends on several factors such as crosslinker type, crosslinking density, hydrophobic/hydrophilic balance and initiator type. In this study, the effects of the initiation system and the crosslinker type on different thermoresponsive hydrogels were compared. For this purpose, thermoresponsive hydrogels were synthesized by using ethylene glycol dimethylacrylate (EGDMA) and N,N′-ethylene bisacrylamide (EBAM) as crosslinkers via photo and thermal initiation systems. The hydrogels were characterized by FTIR spectroscopy and scanning electron microscope (SEM). Effects of the initiation system and the crosslinker type on the release, swelling behavior, morphology and the biocompatibility behavior of the hydrogels were investigated. The hydrogels synthesized with EBAM demonstrated more promising results compared to the one synthesized EGDMA. It was concluded that poly(EBAM-co-NIPAM)-P has the highest swelling ratio and poly(EBAM-co-NIPAM)-T is the most biocompatible hydrogel. In terms of release characteristics, there was not a significant difference between the hydrogels, even though their swelling characteristics differ.

Keywords:

Thermoresponsive hydrogels, photopolymerization, thermal polymerization, N-isopropylacrylamide,

PDF

___

[1] E. Caló, V.V. Khutoryanskiy, "Biomedical applications of hydrogels: A review of patents and commercial products", Eur. Polym. J. 65 (2015) 252-267.
[2] C. De las Heras Alarcón, S. Pennadam, C. Alexander, "Stimuli responsive polymers for biomedical applications", Chem. Soc. Rev. 34(3) (2005) 276-285.
[3] L. Klouda, "Thermoresponsive hydrogels in biomedical applications: a seven-year update", Eur. J. Pharm. Biopharm. 97 (2015) 338-349.
[4] X. Xiao, "Effect of the initiator on thermosensitive rate of poly (N-isopropylacrylamide) hydrogels", eXPRESS Polym. Lett. 1 (2007) 232-235.
[5] E.I. Koca, C. Evrensel, G. Cayli, P.C. Hatir, Effect of plant oil-based crosslinker on drug release behaviour of hydrogels, Presented at the Electric Electronics, Computer Science, Biomedical Engineerings' Meeting (EBBT), 2017, IEEE, 2017.
[6] H. Vihola, A. Laukkanen, L. Valtola, H. Tenhu, J. Hirvonen, "Cytotoxicity of thermosensitive polymers poly (N-isopropylacrylamide), poly (N-vinylcaprolactam) and amphiphilically modified poly (N-vinylcaprolactam)", Biomaterials 26(16) (2005) 3055-3064.
[7] A.T. Gökçeören, B.F. Şenkal, C. Erbil, "Effect of crosslinker structure and crosslinker/monomer ratio on network parameters and thermodynamic properties of Poly (N-isopropylacrylamide) hydrogels", J. Polym. Res. 21(3) (2014) 370.
[8] J. Maitra, V.K. Shukla, "Cross-linking in hydrogels-a review", Am. J. Polym. Sci. 4(2) (2014) 25-31.
[9] R.R.J.P. Gabriela C. Santos, Maria Elisa S. R. Silva, Ricardo G. Sousa, Roberto F. S. Freitas., Comparison of crosslinking agents on the swelling capacities of hydrogels based on acrylamide and sodium methacrylate, Conference: XIV SLAP, Porto de Galinhas, Brasil, 2014.
[10] D. Coughlan, O. Corrigan, "Release kinetics of benzoic acid and its sodium salt from a series of poly (N‐isopropylacrylamide) matrices with various percentage crosslinking", J. Pharm. Sci. 97(1) (2008) 318-330.
[11] N. Bel’nikevich, N. Bobrova, V.Y. Elokhovskii, Z. Zoolshoev, M. Smirnov, G. Elyashevich, "Effect of initiator on the structure of hydrogels of cross-linked polyacrylic acid", Russ. J. Appl. Chem. 84(12) (2011) 2106-2113.
[12] B. Özkahraman, I. Acar, G. Güçlü, "Synthesis and Characterization of Poly (VCL-HEA-IA) Terpolymer for Drug Release Applications", J. Polym. Mater. 33(2) (2016) 351-363.
[13] T. Mosmann, "Rapid colorimetric assay for cellular growth and survival: application to proliferation and cytotoxicity assays", J. Immunol. Methods 65(1-2) (1983) 55-63.