Lineer Pnömatik Silindirlerin Sürtünme Parametrelerinin Değerlendirilmesi için Bir Test Düzeneğinin Geliştirilmesi
Pnömatik silindirler havanın sıkışabilirliğinden ve silindir bloğunda meydana gelen yapışma-kayma olaylarından dolayı lineer olmayan özelliklere sahiptirler. Pnömatik silindirlerdeki sürtünme karakteristiği hassas kontrol işlemlerini olumsuz yönde etkileyen lineer olmayan ana özelliktir. Bu tahrik sistemlerini yüksek seviye kontrol uygulamalarında kullanabilmek için, sürtünme kuvveti modellerinin geliştirilmesi gerekir. Pnömatik silindirlerin sürtünme parametreleri üretici kataloglarında belirtilmediğinden ve sadece analitik yollarla saptanamayacakları için bilinmeyen sürtünme parametrelerinin belirlenmesi gerekir. Bu sebepten dolayı, bu çalışmada, bir test düzeneği tasarlanmış ve pnömatik silindirlerin sürtünme parametrelerinin statik sürtünme kuvveti, Coulomb sürtünme kuvveti, Stribeck hızı ve viskoz sönümleme katsayısı formatında tahmin edilmesi için deneysel adımlar geliştirilmiştir.
Development of a Test Apparatus for Estimation of Friction Parameters at Linear Pneumatic Cylinders
Pneumatic cylinders possess non-linear characteristics due to the air-compressibility and stick-slip incylinder barrel. Friction characteristics in pneumatic cylinders is one of the main non-linearity thatnegatively affects the precise control. To be able to use these actuator systems in high level controlapplications, their friction force models should be developed. Hence, unknown friction parameters shouldbe estimated correctly since the friction parameters of pneumatic cylinders are not listed in themanufacturers’ catalogue and these parameters cannot be calculated by only analytical methods. For thatreason, in this study, a test apparatus is designed and experimental procedures are developed for theestimation of the friction parameters of linear pneumatic cylinders as in the form of static friction force,Coulomb friction force, Stribeck velocity and viscous damping coefficient.
___
- Wang, J., Wang, J., Daw, N., Wu, Q., 2004.
Identification of Pneumatic Cylinder Friction
Parameters Using Genetic Algorithms.
IEEE/ASME Transactions on Mechatronics,
9(1), 100-107.
- Andrghetto, P.L., Valdiero, A.C., Carlotto, L.,
2006. Study of the Friciton Behaviour in
Industrial Pneumatic Actuators. ABCM
Symposium Series in Mechatronics, 2,
369-376.
- Kosari, H., Moosavian, S.A.A., 2015. Fricition
Compensation in a Pneumatic Actuator Using
Recursive Least Square Algorithm. 5 th
Australian Control Conference (AUCC), 5 th -6 th
Nov., Gold Coast, Australia, 81-86.
- Lafmejani, A.S., Masouleh, M.T., Kalhor, A.,
2016. An Experimental Study on Friciton
Identifiacaiton of a Pneumatic Actuator and Dynamic Modelling of a Proportinal Valve.
Proceedings of the 4 th International Conference
on Robotics and Mechatronics, October 26-28,
166-172. Tehran, Iran.
- Saleem, A., Wong, C., Pu, J., Moore, P., 2009.
Mixed-reality environment for frictional
parameters identification in servo-pneumatic
system. Simulation Modelling Practice and
Theory, 17(10), 1575-1586.
- Harnoy, A., Friedland, B., Cohn, S., 2008.
Modelling and Measuring Friciton Effects.
IEEE Control Systems Magazine. 28(6), 82-91.
- Haessig, D.A., Friedland, B., 1990. On the
Modeling and Simulation of Friction. 1990
American Control Conference. doi:10.23919/
acc.1990.4790944.
- Olsson, H., Åström, K., Wit, C.C., Gäfvert, M.,
Lischinsky, P., 1998. Friction Models and
Friction Compensation. European Journal of
Control, 4(3), 176-195.
- Liu, Y.F., Li, J., Zhang, Z.M., Hu, X.H.,
Zhang, W.J., 2015. Experimental Comparison
of Five Friction Models on the Same Test-bed
of the Micro Stick-slip Motion System.
Mechanical Sciences, 6(1), 15-28.
- Armstrong-Helouvry, B., 1993. Stick Slip and
Control in Low-speed Motion. IEEE
Transactions on Automatic Control, 38(10),
1483-1496.
- Canudas de Wit, C., Olsson, H., Astrom, K.,
Lischinsky, P., 1995. A New Model for
Control of Systems with Friction. IEEE
Transactions on Automatic Control, 40(3),
419-425. doi:10.1109/9.376053.
- Saha, A., Wahi, P., Wiercigroch, M., Stefański,
A., 2016. A Modified LuGre Friction Model
for an Accurate Prediction of Friction Force in
the Pure Sliding Regime. International Journal
of Non-Linear Mechanics, 80, 122-131.
doi:10.1016/j.ijnonlinmec.2015.08.013.
- Yanada, H., Sekikawa, Y., 2008. Modeling of
Dynamic Behaviors of Friction. Mechatronics,
18(7), 330-339 doi:10.1016/j.mechatronics
.2008.02.002.
- Dahl, P.R., 1968. A Solid Friction Model.
doi:10.21236/ada041920.
- Dupont, P., Armstrong, B., Hayward, V., 2000.
Elasto-plastic
Friction
Model:
Contact
Compliance and Stiction. Proceedings of the
2000 American Control Conference. ACC
(IEEE Cat. No.00CH36334). doi:10.1109/acc.
2000.876665.
- Swevers, J., Al-Bender, F., Ganseman, C.,
Projogo, T., 2000. An Integrated Friction
Model Structure with Improved Presliding
Behavior for Accurate Friction Compensation.
IEEE Transactions on Automatic Control,
45(4), 675-686. doi:10.1109/9.847103.
- Karnopp, D., 1985. Computer Simulation of
Stick-Slip Friction in Mechanical Dynamic
Systems. Journal of Dynamic Systems,
Measurement, and Control, 107(1), 100.
doi:10.1115/1.3140698.
- Al-Bender, F., Lampaert, V., Swevers, J., 2005.
The Generalized Maxwell-slip Model: A Novel
Model
for
Friction
Simulation
and
Compensation.
IEEE
Transactions
on
Automatic Control, 50(11), 1883-1887.
doi:10.1109/tac.2005.858676.
- Schroeder, L.E., Singh, R., 1993. Experimental
Study on Friciton in a Pneumatic Actuator at
Constant Velocity. Journal of Dynamic
Systems, Measurement and Control, 115,
575-577.
- Belforte, G., Mattiazzo, G., Mauro, S.,
Tokashiki, L.R., 2003. Measurement of
Friction Force in Pneumatic Cylinders.
Tribotest,
10(1),
33-48.
doi:10.1002/
tt.3020100104.
- Dağdelen, M., Sarıgeçili, M.İ., 2019.
Estimation of Friciton Parameters of Linear
Pneumatic
Cylinders.
Submitted
for
publication in Journal of Engineering Sciences
and Design.
- Tran, X.B., Yanada, H., 2013. Dynamic
Friction Behaviors of Pneumatic Cylinders.
Intelligent Control and Automation, 4(2),
180-190. doi:10.4236/ica.2013.42022.
- Ritcher, R.R.M., Valdiero, A.C., 2014. Friciton
Dynamics Mathematical Modelling in Special
Pneumatic Cylinder. ABCM Symposium
Series in Mechatronics, 6, 800-808.