Gülçin BİLGİCİ CENGİZ (EKER), İlyas ÇAĞLAR

Assessment of Mass Attenuation Coefficient, Effective Atomic Number and Electron Density of Some Aluminum Alloys

Aluminum alloys have numerous application fields in today's technology due to their excellent mechanical features, high electrical and thermal conductivity, magnificent corrosion resistance, good weldability, good formability and similar properties. In the present study, we investigated the mass attenuation coefficient (µm), effective atomic number (Zeff) and effective electron density (Ne) of four different type commercially available aluminum alloys. For his purpose, µm, Zeff, and Ne values of 5083, 5754, 6061 and 6082 coded aluminum alloys were determined by employing NaI(Tl) gamma ray spectrometry at 661.66,1173.23 and 1332.48 keV gamma ray energies obtained from 137Cs and 60Co radioactive sources. Also these parameters theoretically determined using PhyX-PSD computer program at the photon energies of 1 keV–1 GeV and compared with the experimental results. The variation of µm, Zeff, and Ne with incident photon energy presented graphically. From the obtained results it might be concluded that the µm, Zeff, and Ne values for studied alloy samples depend on the incident photon energy and elemental composition of alloys. In addition, it was observed from the theoretical and experimental results that aluminum alloys under study have almost the same gamma ray attenuation capacity.

Keywords:

Gamma ray, mass attenuation coefficient effective atomic number, electron density,

PDF

___

Akkurt I., Basyigit C., Kilincarslan S., Mavi B. (2005). The shielding of γ-rays by concretes produced with barite. Progress in Nuclear Energy, 46 (1), 1-11.
Akkurt I. (2009). Effective atomic and electron numbers of some steels at different energies. Annals of Nuclear Energy, 36, 1702–1705.
Akman F., Kaçal M.R., Sayyed M.I., Karataş H.A. (2019). Study of gamma radiation attenuation properties of some selected ternary alloys. Journal of Alloys and Compounds, 782, 315–322.
Alim B., Şakar E., Baltakesmez A., Han İ., Sayyed M.I., Demir L. (2019). Experimental investigation of radiation shielding performances of some important AISI-coded stainless steels: Part I. Radiation Physics and Chemistry,160, 108455.
Bilgici Cengiz G., Çağlar İ. (2016). Determination of the Health Hazards and Life Time Cancer Risk Due to Natural Radioactivity in Soil of Akyaka, Arpaçay and Susuz Areas of Kars, Turkey. International Journal of Scientific &Engineering Research, Volume 7(3),619-626.
Büyükyıldız M. (2017). Investigation of radiological properties of some shielding materials on charged and uncharged radiation interaction for neutron generator. Radiation Effects and Deffects in Solids, 172, 216-234.
Davis J.R. (2013). Aluminum and Aluminum Alloys. ASM International, 351–416 (2013).
Elmahroug Y., Tellili B., Souga C. (2015). Determination of total mass attenuation coefficients, effective atomic numbers and electron densities for different shielding materials. Annals of Nuclear Energy, 75, 268-274.
El-Rayes M.M., El-Danaf E. (2012). The influences of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082. Journal of Materials Processing Technology, 212; 1157–1168.
Fuller C.B., Krause A.R., Dunand C.D., Seidman D.N. (2002). Microstructure and mechanical properties of a 5754 aluminum alloy modified by Sc and Zr additions. Materials Science and Engineering A,338; 8-16.
Han, I., Demir, L., 2009. Mass attenuation coefficients, effective atomic and electron numbers of Ti and Ni alloys. Radiat. Meas. 44, 289-294.
Kurudirek, M. (2017). Heavy metal borate glasses: potential use for radiation shielding. Journal of Alloys and Compounds, 727, 1227-1236.
Kurudirek M., Büyükyıldız M., Özdemir Y. (2010) Effective atomic number study of various alloys for total photon interaction in the energy region of 1 keV–100 GeV,” Nuclear Instruments and Methods in Physics Research A. 613, 251–256.
Lee SH., Saito Y., Sakai T., Utsunomiya H. (2002). Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding. Materials Science and Engineering A, 325:228–35.
Mostafa A.M.A., Issa S.A., Sayyed M.I. (2017). Gamma ray shielding properties of PbO-B2O3-P 2O5 doped with WO3. Journal of Alloys and Compounds, 708, 294-300.
Narender K., Madhusudhan R.A.S., Gopal K.R.K.., Gopi K.N., Ashok R.K. (2013). Determination of effective atomic number and mass attenuation coefficient of 5070 wrought aluminum alloy with multi energetic photons. Res. J. Phys. Sci. 1,1-5.
Oto, B., Gur, A., Kavaz, E., Cakir T., Yaltay, N. (2016). Determination of gamma and fast neutron shielding parameters of magnetite concretes. Progress in Nuclear Energy. 92, 71- 80.
Oto B., Yıldız N., Akdemir F., Kavaz E. (2015). Investigation of gamma radiation shielding properties of various ores. Progress in Nuclear Energy, 85, 391-403.
Ozturk F, Sisman A, Toros S, Kilic S, Picu RC. (2010). Influence of aging treatment on mechanical properties of 6061 aluminium alloy. Materials and Design 31; 972–975.
Sayyed M.I., Kaky K.M., Şakar E., Akbaba U., Taki M.M., Agar O. (2019a). Gamma radiation shielding investigations for selected germanate glasses. Journal of Non-Crystalline Solids, 512, 33–40.
Sayyed M.I., Kaky K.M., Gaikwad D.K., Agar O., Gawai U.P., Baki S.O. (2019 b). Physical, structural, optical and gamma radiation shielding properties of borate glasses containing heavy metals (Bi2O3/MoO3). Journal of Non-Crystalline Solid, 507, 30–37.
Sayyed, M.I. (2016). Bismuth modified shielding properties of zinc boro-tellurite glasses. Journal of Alloys and Compounds, 688, 111–117.
Sharma R., Sharma J.K., Kaur T., Singh T., Sharma J., Singh P.S. (2017). Experimental investigation of effective atomic numbers for some binary alloys. Nuclear Engineering and Technology, 49, 1571–1574.
Sharma R., Sharma V., Singh P.S., Singh T., (2012). Effective atomic numbers for somecalcium–strontium-borate glasses. Annals of Nuclear Energy, 45, 144–149.
Singh T., Kaur A., Sharma J., Singh P.S. (2018). Gamma rays' shielding parameters for some Pb-Cu binary alloys. Engineering Science and Technology, an International Journal, 21, 1078-1085.
Singh, V.P., Badiger, N.M. (2014). Investigation on radiation shielding parameters of ordinary, heavy and super heavy concretes. Nuclear Technology Radiation &Protection. 29 (2), 149-156.
Singh V.P., Medhat M.E., Shirmardi S.P. (2015). Comparative studies on shielding properties of some steel alloys using Geant4, MCNP, WinXCOM and experimental results. Radiation Physics and Chemistry, 106,255-260.
Şakar E., Büyükyıldız M., Alım B., Şakar B.C., Kurudirek M. (2019). Leaded brass alloys for gamma-ray shielding applications. Radiation Physics and Chemistry, 159, 64–69.
Şakar E., Özpolat Ö.F., Alım B., Sayyed M., Kurudirek M. (2020). Phy-X/PSD: Development of a user friendly online software for calculation of parameters relevant to radiation shielding and dosimetry. Radiation Physics and Chemistry, 108496, 1-12.
Yıldırım S., Tugrul A.B., Buyuk B., Demir E. (2016). Gamma Attenuation Properties of Some Aluminum Alloys. Acta Physica Polonica A, 129; 813-815.
Yorgun N.Y., Kavaz E. (2019). Gamma photon protection properties of some cancer drugs for medical applications. Results in Physics, 13 (102150), 1-6.