Şekil hafızalı alaşımların biyomedikal uygulamaları
Şekil hafızalı alaşımlar ilgi çekici özelliklerinden dolayı birçok mühendislik uygulaması için potansiyel oluşturmaktadır.Mühendisliğe ek olarak, özellikle NiTi şekil hafızalı alaşımlarının mekanik özelliklerinin yanında biyouyumlu olmasından dolayıbiyomedikal alanında da yaygın olarak kullanılabilmekte ve imalat maliyetlerinin düşmesi ile orantılı olarak kullanım oranınınartacağı tahmin edilmektedir. Bu derleme makalesinde şekil hafızalı alaşımların genel özelliklerinden kısaca bahsedilmekte ve daha sonra bu alaşımların diş hekimliği, ortopedi ve genel cerrahi uygulamaları tanıtılmaktadır.
Biomedical applications of shape memory alloys
Shape memory alloys are attractive materials for many engineering applications due to their superior and rare properties compared to conventional alloys. Beside good mechanical properties, good biocompability of NiTi alloys make these materials possible candidates for biomedical industries in addition to engineering applications. They are predicted to be used in biomedical field more widely as the manufacturing and processing costs can be decreased. In this review paper, general properties of shape memory alloys are documented and current/possible applications of these materials in denstistry, ortopedics and general surgery are discussed.
___
- Wayman CM. and K. Otsuka. 1998. Shape Memory
Materials. Cambridge University Press.
- Acar E, Ozbulut OE and Karaca HE. 2015. Experimental
investigation and modeling of the loading rate and temperature
dependent superelastic response of a high performance shapememory
alloy, Smart Mater. Struct., (24/7), 75020.
- Kaya I, Tobe H, Karaca HE, Acar E, and Chumlyakov YI,
2016. Shape Memory Behavior of [111]-Oriented NiTi Single
Crystals After Stress-Assisted Aging, Acta Metall. Sin. (English
Lett., (29 /3) 282–286.
- Karaca HE, Saghaian SM, Tobe H, Acar E, Basaran B,
Nagasako M, Kainuma R, and Noebe RD. 2014. Diffusionless
phase transformation characteristics of Mn75.7Pt24.3, J. Alloys
Compd., (589), 412–415.
- Acar E. 2015. Dynamic mechanical response of a Ni45.
7Ti29. 3Hf20Pd5 alloy, Materiaşs Science and Engineering A,
(633) 169-175.
- Acar E, Karaca HE, Tobe H, Noebe RD and Chumlyakov
YI. 2013. Characterization of the shape memory properties of a
Ni45.3Ti39.7Hf10Pd5 alloy, J. Alloys Compd., (578) 297–302.
- Machado LG, Savi MA. 2002. Medical applications of shape
memory alloys, Braz J Med Biol res (36 /6) 683-691.
- Duerig T, Pelton A, Stoeckel D. 1999 An overview of nitinol
medical applications. Mater Sci Eng A (273-275),149-160.
- Es-Souni M, Fischer-Brandies H. 2005 Assessing the
biocompatibility of NiTi shape memory alloys used for medical
applications. Anal Bioanal Chem (381),557-567.
- Ryhanen J. 2000. Biocompatibility evaluation of nickeltitanium
shape memory metal alloy [Ph.D. dissertation]. Faculty
of Medicine, Department of Surgery, University of Oulu.
- Wever D, Veldhuizen A, Sanders M, Schakenraad J, Van
Horn J. 1997. Cytotoxic, allergic and genotoxic activity of a
nickel-titanium alloy. Biomaterials (18),1115-120.
- Guidoin R, Zhang Z, Dionne G, Douville Y, King M,
Legrand A, et al. 2005. Corrosion of the nitinol wire of
endovascular prostheses: does nickel ion impair the devices
performance? In: Medlin D, Helmus M, editors. Medical device
materials II e proceedings of the materials and processes for
medical devices conference St. Paul, MN; 284-289.
- Barcelos AM, Luna AS, de Assis Ferreira N, Braga AV, do
Lago DC, de Senna LF. 2012. Corrosion evaluation of
orthodontic wires in artificial saliva solutions by using response
surface methodology. Mater Res(16),50-64.
- Krishna BV, Bose S, Bandyopadhyay A. 2007. Laser
processing of net-shape NiTi shape memory alloy. J Metal Mater
Trans A (38),1096–1103.
- Shabalovskaya S, Anderegg J, Van Humbeeck J. 2008.
Critical overview of nitinol surfaces and their modifications for
medical applications. Acta Biomater (4),447-467.
- Acar E, Oktay T.2018. Havacılık ve uzay uygulamalarında
şekil hafızalı alaşımlar, Niğde Ömer Halisdemir Üniversitesi
Mühendislik Bilimleri Dergisi, (7 /1), 335-349.
- Robertson S, Pelton A, Ritchie R. 2012. Mechanical fatigue
and fracture of nitinol. Int Mater Rev (57/1),1-37.
- Hornbogen E. 2004. Review thermo-mechanical fatigue of
shape memory alloys. J Mater Sci (39/2), 385-399.
- Pelton A. 2011. Nitinol fatigue: a review of microstructures
and mechanisms. J Mater Eng Perform (20/(4-5),613-617.
- Petrini L, Dordoni E, Wu W, Guala C, Silvestro C,
Migliavacca F, et al. 2013. Fatigue resistance of nitinol
peripheral stents. In: 6th ECCOMAS conference on smart
structures and materials (SMART2013), Politecnico di Torino,
24-26.
- Thompson SA. 1999. An overview of nickeletitanium alloys
used in dentistry. Int Endod J 33, 297-310.
- Method and system for orthodontic moving of teeth. 1973.
Patent US 4037324.
- Petrini L, Francesco M, 2011. Biomedical applications of
shape memory alloys, Journal of Metallurgy, 501483.
- Kujala S, Ryh¨anen J, J¨ams¨a T et al.. 2002. Bone
modeling controlled by a nickel-titanium shape memory alloy
intramedullary nail. Biomaterials, (23/12) ,2535–2543.
- Torrisi L and Di Marco G. 2000. Physical characterization
of endodontic instruments in NiTi alloy, in Proceedings of the
International Symposium on Shape Memory Materials, Materials
Science Forum, (327),75–78.
- Auricchio F, Boatti E, Conti M. 2015. SMA biomedical
applications, Shape Memory Alloy Engineering, ButterworthHeinemann.
- Montenegro-Santillan R, Alegre-Domingo T, Faus-Matoses
V, Faus-Llacer V.2013. An in vitro comparison of cyclic fatigue
resistance of ProTaper universal and GT series X files. Med Oral
Patol Oral Cir Bucal (18/3),e533536.
- Pelton, Stockel, Duerig TW. 2000. Medical uses of nitinol.
Mater Sci Forum (327-328),63-70.
- VVAA. 1990. In: Duerig TW, editor. Engineering aspects of
shape memory alloys. Butterworth-Heinemann Limited.
- Tarnita D, Tarnita D, Bolcu D. 2011. In: Fazel-Rezai R,
editor. Biomedical engineering e from theory to applications.
- Dai KR, Hou XK, Sun YH, Tang RG, Qiu SJ, Ni C. 1993.
Treatment of intra-articular fractures with shape memory
compression staples. Injury (24/10),651-655.
- Lekston Z, Stroz D, Drusik-Pawlowska M.2012.
Preparation and characterization of nitinol bone staples for
cranio-maxillofacial surgery. J Mater Eng Perform 21,2650-
2656.
- Shape memory alloy staple. 1999. Patent EP 1173102 B1.
- Youyi C. 2001. Orthopedic application of NiTi shape
memory alloys in China. In: SMST-2000: proceedings of the
international conference on shape memory and superelastic
technologies.
- Intramedullary nail to be inserted into a fractured long bone.
2008. Patent EP 2133034 A1.
- [36] Kujala S, Ryhanen J, Jamsa T, Danilov A, Saaranen J,
Pramila A, et al. 2002. Bone modeling controlled by a nickeltitanium
shape memory alloy intramedullary nail. Biomaterials
(23/12),25352543.
- MedShape www.medshape.com. (Consultation: February
2013).
- Kim D, Eun J, Park J. 2012. Posterior cervical fixation with
a nitinol shape memory loop for primary surgical stabilization of
atlantoaxial instability: a preliminary report. J Korean Neurosurg
Soc (52),21-26.
- Sanchez Marquez J, Sanchez Perez-Grueso F, FernandezBaíllo
N, Gil Garay E. 2012. Gradual scoliosis correction over
time with shape-memory metal: a preliminary report of an
experimental study. Scoliosis ,(7/1).
- Kuong E, Cheung K, Samartzis D, Yeung K, Luk K. 2012.
Superelastic rods: the future of scoliosis curve correction. J Bone
Joint Surg Br (94)102.
- Wang Y, Zheng G, Zhang X, Zhang Y, Xiao S, Wang Z.
2011. Temporary use of shape memory spinal rod in the
treatment of scoliosis. Eur Spine J ,(20),118-122.
- Kianzad S, Amini A, Karkouti S. 2011. Force control of
laparoscopy grasper using antagonistic shape memory alloy. In:
2011 1st Middle East conference on biomedical engineering,
MECBME 2011, Sharjah; pp. 335-338.
- Cuschieri A. 1991. Variable curvature shape-memory
spatula for laparoscopic surgery. Surg Endosc(;5), 179-181.
- 2018. (https://www.cookmedical.com/urology/our-historynitinol-stone-extractors/)
- Costamagna G, Tringali A, Spicak J, Mutignani M, Shaw J,
Roy A, et al. 2012. Treatment of malignant gastroduodenal
obstruction with a nitinol self-expanding metal stent: an
international prospective multicentre registry. Dig Liver Dis
(44),37-43.
- Rossi P, Bezzi M, Rossi M, Adam A, Chetty N, Roddie M,
et al. 1994. Metallic stents in malignant biliary obstruction:
results of a multicenter European study of 240 patients. J Vasc
Interv Radiol (5),279-285.
- Talreja J, Eloubeidi M, Sauer B, Al-Awabdy B, Lopes T,
Kahaleh M, et al. 2012. Fully covered removable nitinol selfexpandable
metal stents (SEMS) in malignant strictures of the
esophagus: a multicenter analysis. Surg Endosc (269,1664-1669.
- Kujawski K, Stasiak M, Rysz J. 2012. The evaluation of
esophageal stenting complications in palliative treatment of
dysphagia related to esophageal cancer. Med Sci Monit (18),
323-329.
- 2018. (http://centralgaheart.com/need-know-heart-stent/)
- Allium Medical Solutions Ltd. www.allium-medical.com.
(Consultation: May 2013).
- Matsuzaki A, Morita T, Tokue A, Kobayashi Y. 2004.
Clinical study of intraurethral stent (MEMOKATH") for
prostatic hyperplasia e study of the changes in uroflowmetry and
international prostate symptom score in the early phase after
insertion of the stent. Nishinihon J Urol (66), 637-643.
- Muller B, Deyhle H, Mushkolaj S, Wieland M. 2009. The
challenges in artificial muscle research to treat incontinence.
Swiss Med Wkly (139),591-595.
- Yakachi CM, Griffis J, Paıkalova M, Gall K. 2008. Bearing
area: A new indication for suture anchor pullout strength?.
Journal of Ortopaedic Research. (27/8), 1048-1054.
- Elahinia ME, Hashemi M, tabesh M. 2012. Manufacturing
and processing of NiTi implants: A review, progress in Materials
Science, (57), 911-946.
- Chahine G, Koike M, Okabe T, Smith P, Kovacevic R.
2008. The design and production of Ti–6A1–4V ELI customized
dental implants. JOM (60),50–55.
- Upadhyaya GS. 2002. Powder metallurgy technology.
Cambridge International Science Publishing; 68–117 [chapters 6
and 7].
- Harrysson O, Cansizoglu O, Marcellin-Little D, Cormier D,
West H. 2008. Direct metal fabrication of titanium implants with
tailored materials and mechanical properties using electron beam
melting technology. Mater Sci Eng C (28),366–373.