Pious O. OKEKUNLE, Akinola D. OGUNSOLA, Emmanuel D. ABODUNRIN, Olanrewaju M. DARAMOLA, Oluwapelumi A. BABAYEMI

Tectona grandis' in Katalitik Hızlı Piroliziyle Üretilen Biyo-Yağların Yakıt Özelliklerinin Analizi ve Karşılaştırılması

Bu çalışmada, farklı sıcaklıklarda (400 – 600 oC'de) ve farklı biyokütle/katalizör (b/c) ağırlık oranlarında (90/10 – 60/40) sabit yataklı bir reaktörde Tectona grandis'in katalitik hızlı pirolizi ile üretilen biyo-yağların yakıt özellikleri incelenmiştir. Katalizör olarak magnezyum oksit (MgO) kullanılmıştır ve ürün verimleri belirlenmiştir. Biyo-yağlar karakterize edilmiştir ve element bileşimleri, yüksek ısıtma değerleri, maksimum biyo-yağ verimi koşullarındaki temel yakıt özellikleri, viskozite, parlama noktası, nem içeriği, pH değeri ve Conradson karbon kalıntısı (CCR) değerleri incelenmiştir ve katalitik olmayan piroliz biyo-yağların değerleri ile karşılaştırılmıştır. 400, 500 ve 600 oC'de ve 70/30, 80/20 ve 70/30 b/c oranlarında elde edilen ağırlıkça maksimum biyo-yağ verimleri sırasıyla, %31,53, % 40,87 ve % 29,30 olarak bulunmuştur. Katalitik piroliz biyo-yağları, katalitik olmayan piroliz biyo-yağlarından daha yüksek karbon ve hidrojene ancak daha düşük oksijen ve kükürt içeriğine sahip bulunmuştur. Katalitik piroliz biyoyağlarının Yüksek Isıtma Değerleri (HHV) (40,31 – 42,08 MJ/kg), katalitik olmayan biyo-yağlardan (36,47 – 36,76 MJ/kg) daha yüksek belirlenmiştir. Katalizör, viskoziteyi (400 ve 500 oC'de), nem içeriğini ve CCR'yi (400 ve 600 oC'de) azaltmıştır ve biyo-yağların pH değerini (400 ve 600 oC'de) artırmıştır. Katalitik piroliz, biyo-yağların yakıt özelliklerini geliştirmektedir.

ANALYSIS AND COMPARISON OF THE FUEL PROPERTIES OF BIO-OILS PRODUCED BY CATALYTIC FAST PYROLYSIS OF Tectona grandis

This study analyzed the fuel properties of bio-oils produced by catalytic fast pyrolysis of Tectonagrandis in a fixed bed reactor at different temperatures (400 – 600 oC) and biomass to catalyst (b/c) weightratios (90/10 – 60/40). Magnesium oxide (MgO) was used as catalyst. The product yields were determined.Bio-oils were characterized with their elemental composition and their Higher Heating Values (HHVs) aswell as their basic fuel properties at maximum bio-oil yields conditions, including viscosity, flash point,moisture content, pH value and Conradson Carbon Residue (CCR), were determined and compared withthose of non-catalytic pyrolysis bio-oils. The maximum yields of bio-oil at 400, 500 and 600 oC were 31.53,40.87 and 29.30 wt.%, respectively, obtained at b/c ratios of 70/30, 80/20 and 70/30. Catalytic pyrolysisbio-oils possessed higher carbon and hydrogen but lower oxygen and sulphur contents than non-catalyticpyrolysis bio-oils. The HHVs of catalytic pyrolysis bio-oils (40.31 – 42.08 MJ/kg) were higher than thoseof non-catalytic bio-oils (36.47 – 36.76 MJ/kg). Catalyst reduced the viscosity (at 400 and 500 oC), moisturecontent and CCR (at 400 and 600 oC), and increased the pH value of bio-oils (at 400 and 600 oC). Catalyticpyrolysis deoxygenates and enhances the fuel properties of bio-oils.

PDF

___

1. Anouti, S., Haarlemmer, G., Déniel, M. and Roubaud, A. (2016) Analysis of physicochemical properties of bio-oil from hydrothermal liquefaction of blackcurrant pomace, Energy & Fuels, 30(1), 398 – 406.
2. Bardalai, M. and Mahanta, D.K. (2015) A review of physical properties of biomass pyrolysis oil, International Journal of Renewable Energy Research, 5(1), 277 – 286.
3. Bridgwater, A.V. and Peacocke, G.V.C. (2000) Fast pyrolysis process for biomass, Renewable and Sustainable Energy Reviews, 4, 1 – 73.
4. Chukwuneke, J.L., Ewulonu, M.C., Chukwujike, I.C. and Okolie, P.C. (2019) Physicochemical analysis of pyrolyzed bio-oil from swietenia macrophylla (mahogany) wood, Heliyon, 5(6), 2019, accessed May 21, 2020, from https://doi.org/10.1016/j.heliyon.2019.e01790.
5. French, R. and Czernik, S. (2010) Catalytic pyrolysis of biomass for biofuels production, Fuel Processing Technology, 91, 25 – 32.
6. Garcia-Perez, M., Adams, T.T., Goodrum, J.W., Geller, D.P. and Das, K.C. (2007). Production and fuel properties of pine chip bio-oil/biodiesel blends, Energy & Fuels, 21, 2363 – 2372.
7. Garcὶa–Pèrez, M., Chaala, A. and Roy, C. (2002) Vacuum pyrolysis of sugarcane bagasse, Journal of Analytical and Applied Pyrolysis, (65), 111 – 136.
8. Güllü D. (2003) Effect of catalyst on yield of liquid products from biomass via pyrolysis, Energy Sources, 25(8), 753 – 765.
9. Kato, Y. Enomoto, R., Akazawa, M. and Kojima, Y. (2016) Characterization of Japanese cedar bio-oil produced using a bench-scale auger pyrolyzer, Springer Plus, 5, 1 – 11.
10. Khan, M.Z.H., Sultana, M., Al-Mamum, M.R. and Hasan, M.R., Pyrolytic waste oil and its diesel blend: fuel characterization, Journal of Environmental and Public Health, 2016, accessed May 10, 2020, from https://doi.org/10.1155/2016/7869080.
11. Kraiem, T., Hassen-Trabelsi, A. B., Naoui, S. and Belayouni, H. (2014). Characterization of syngas and bio-char: co-products from pyrolysis of waste fish fats, The Fifth International Renewable Energy Congress, IREC 2014, March 25 – 27, Hammamet, Tunisia.
12. Latake, P.T., Pawar, P. and Ranveer, A.C. (2015) The greenhouse effect and its impacts on environment, International Journal of Innovative Research and Creative Technology, 1(3), 333 – 337.
13. Lyu, G., Wu, S. and Zhang, H. (2015) Estimation and comparison of bio-oil components from different pyrolysis conditions, Frontiers in Energy Research, 3(28), 1 – 11.
14. Mythili, R., Subramanian, P. and Uma, D. (2017) Physicochemical properties of the bio-oil from Prosopis juliflora in fluidized-bed reactor, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(8), 843 – 849.
15. Nanda, S., Mohanty, P., Kozinski, J.A. and Dalai, A.K. (2014) Physico-chemical properties of bio-oils from pyrolysis of lignocellulosic biomass with high and slow heating rate, Energy and Environment Research, 4(3), 21 – 32.
16. Okekunle, P.O., Itabiyi, O.E., Adetola, S.O., Alayande, I.O., Ogundiran, H.O. and Odeh, K.G. (2016) Biofuel production by pyrolysis of cassava peel in a fixed bed reactor, International Journal of Energy for a Clean Environment, 17(1), 57 – 65.
17. Okekunle, P.O., Ogunsola, A.D., Babayemi, O.A., Abodunrin, E.D. and Daramola, O.M. (2021). Fuel characterization of bio-oil from fast pyrolysis of Tectona grandis in a fixed bed reactor at different temperatures (400 – 700 oC), International Journal of Energy for a Clean Environment, 22(3), 1 – 14.
18. Onay, Ö. (2014) Effects of catalyst on pyrolysis of Laurel (Laurus Nobilis L.) seed in a fixed bed tubular reactor, Chemical Engineering Transactions, 37, 127 – 132.
19. Oyebanji, J.A. and Ololade, Z.S. (2017) Fast Pyrolysis of Tectona grandis Wood for Bio-oil: Characterization and Bactericidal Potentials, Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering, 17(1), 31 – 37.
20. Pütün, E.(2010) Catalytic pyrolysis of biomass: Effects of pyrolysis temperature, sweeping gas flow rate and MgO catalyst, Energy, 35, 2761 – 2766.
21. Pütün, E., Ateş, F. and Pütün, A.E. (2008) Catalytic pyrolysis of biomass in inert and steam atmospheres, Fuel, 87, 815 – 824.
22. Qiang, L., Xu-lai, Y. and Xi-feng, Z. (2008) Analysis on chemical and physical properties of bio-oil pyrolyzed from rice husk, Journal of Analytical and Applied Pyrolysis, 82, 191 – 198.
23. Samolada, M.C., Papafotica, A. and Vasalos, I.A. (2000) Catalyst evaluation for catalytic biomass pyrolysis, Energy & Fuels, 14, 1161 – 1167.
24. Shadangi, K.P. and Mohanty, K. (2014a) Thermal and catalytic pyrolysis of Karanja Seed to produce liquid fuel, Fuel, 115, 434 – 442.
25. Shadangi, K.P. and Mohanty, K. (2014b) Production and characterization of pyrolytic oil by catalytic pyrolysis of Niger seed, Fuel, 126, 109 – 115.
26. Shah, A., Darr, M.J., Dalluge, D., Medic, D. Webster, K. and Brown, R.C. (2012) Physicochemical properties of bio-oil and biochar produced by fast pyrolysis of stored singlepass corn stover and cobs, Bioresource Technology, 125, 348 – 352.
27. Thangalazhy-Gopakumar, S., Adhikari, S., Ravindran, H., Gupta, R.B., Fasina, O., Tu, M. and Fernando, S.D. (2010) Physiochemical properties of bio-oil produced at various temperatures from pine wood using an auger reactor, Bioresource Technology, 101, 8389 – 8395.
28. Wang S. (2013) High Efficiency Separation of Bio-oil. In M.D. Matovic (Ed.), Biomass Now – Sustainable Growth and Use (pp. 401-418). London: IntechOpen. https://doi.org/10.5772/51423.
29. Weerachanchai, P., Tangsathitkulchai, C. and Tangsathitkulchai, M. (2007) Fuel properties and chemical compositions of bio-oils from biomass pyrolysis, SAE Technical Paper 2001- 01-2024, 2007, https://doi.org/10.4271/2007-01-2024.
30. Yu, F., Deng, S., Chen, P., Liu, Y., Wan, Y., Olson, A., Kittleson, D. and Ruan, R. (2007) Physical and chemical properties of bio-oils from microwave pyrolysis of corn stover, Applied Biochemistry and Biotechnology, 136 – 140, 957 – 970.
31. Zabeti, M., Nguyen, T.S., Lefferts, L., Heeres, H.J. and Seshan, K. (2012) In situ catalytic pyrolysis of lignocellulose using alkali-modified amorphous silica alumina, Bioresource Technology, 118, 374 – 381.
32. Zhou, L., Yang, H., Wu, H., Wang, M. and Cheng, D. (2013) Catalytic pyrolysis of rice husk by mixing with zinc oxide: Characterization of bio-oil and its rheological behaviour, Fuel Processing Technology, 106, 385 – 391.