___

• Abdi-Jalebi, E., McMahon, R. (2005) Simple and practical construction of high-performance, low-cost Rogowski transducers and accompanying circuitry for research applications, IMTC 2005 - Instrumentation and Measurement Technology Conference, Ottawa, Canada, 354–358.
• Altun, Y., Özcan, M. (2015) Ütü masası üretiminde kullanılan elektrik direnç nokta kaynak makinesi tasarım parametrelerinin tespiti, Mühendislik Bilimleri ve Tasarım Dergisi, 3 (2), 85-90.
• Azizoğlu, B.T, Karaca, H. (2017) Geniş bantlı akım algılayıcı için gerekli aktif entegratör devresi tasarım ve gerçeklemesi, Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 19(55), 45–51, doi: 10.21205/deufmd.2017195504
• Brydak K., Szlachta, A. (2016) Measuring methods of welding process parameters, Measurement Automation Monitoring, 62(1), 26–29.
• Deepati, A.K., Alhazmi, W., Benjeer, I. (2021) Mechanical characterization of AA5083 aluminum alloy welded using resistance spot welding for the lightweight automobile body fabrication, Materials Today: Proceedings, 1–10, doi: 10.1016/j.matpr.2021.01.646
• Duan, B., Zhang, C., Guo, M., Zhang, G. (2014) A new digital control system based on the double closed-loop for the full-bridge inverter, The International Journal of Advanced Manufacturing Technology, 77(1–4), 241–248, doi: 10.1007/s00170-014-6463-6
• Fiore, J.M. (2016) Operational amplifiers & linear integrated circuits: theory and application, Independently published, 1–589, ISBN13: 978–1796856897
• Giaccone, L., Cirimele, V., Canova, A. (2020) Mitigation solutions for the magnetic field produced by MFDC spot welding guns, IEEE Transactions on Electromagnetic Compatibility, 62(1), 83–92, doi: 10.1109/temc.2018.2877805
• Hofstötter, N., Krapp, J. (2018). Data sheet skyper 32pro r, Semikron, Erişim Adresi: https://www.semikron.com/dl/service-support/downloads/download/semikron-datasheet-skyper-32-pro-r-l6100202.pdf, (Erişim Tarihi: 07.05.2021)
• Jenney, C.L., O’Brien, A. (2001) Welding handbook, Vol. 1: Welding Science and Technology (9th ed.), Woodhead Publishing Ltd., 1–985, ISBN–10: 0871716577
• Jun, Y., Li, G., Liu, H., Yang, G., Ling, G. (2016) Design of a flexible rogowski coil with active integrator applied in lightning current collection. 33rd International Conference on Lightning Protection (ICLP), 1–7, doi: 10.1109/iclp.2016.7791472
• Keller, P. (2013) Measuring magnetic field transients, Magn. Tech.Int., 57–60.
• Klopcic, B., Stumberger, G., & Dolinar, D. (2007) Iron core saturation of a welding transformer in a medium frequency resistance spot welding system caused by the asymmetric output rectifier characteristics, 2007 IEEE Industry Applications Annual Meeting, 2319– 2326, doi: 10.1109/07ias.2007.350
• Li, W., Feng, E., Cerjanec, D., Grzadzinski, G.A. (2004) Energy consumption in AC and MFDC resistance spot welding, Sheet Metal Welding Conference XI, Sterling Heights, MI, 1–12.
• Liu, Y., Lin, F., Zhang, Q., Zhong, H. (2011) Design and construction of a Rogowski coil for measuring wide pulsed current. IEEE Sensors Journal, 11(1), 123–130, doi: 10.1109/jsen.2010.2052034
• Lund, S.H.J., Billeschou, P., Larsen, L.B. (2019) High-bandwidth active impedance control of the proprioceptive actuator design in dynamic compliant robotics, Actuators, 8(4), 71–103, doi: 10.3390/act8040071
• Ramboz, J.D. (1995) Machinable Rogowski coil, design and calibration, Proceedings of 1995 IEEE Instrumentation and Measurement Technology Conference - IMTC ’95, 329–334, doi: 10.1109/imtc.1995.515151
• Ray, W.F., Hewson, C.R. (2000) High performance Rogowski coil current tranducers, IEEE Industry Applications Conference, 5, 3083–3090.
• Rezaee, M., Heydari, H. (2010) Design modification of Rogowski coil for current measurement in low frequency, Iranian Journal of Electrical & Electronic Engineering, Vol. 6, No. 4, 232–238.
• Semikron (2013). Skm200gb12t4 Fast IGBT Module Data Sheet, Erişim Adresi: https://www.semikron.com/dl/service-support/downloads/download/semikron-datasheet-skm200gb12t4-22892060.pdf (Erişim Tarihi: 07.05.2021)
• Tapashetti, P., Gupta, A., Mithlesh, C., Umesh, A.S. (2012) Design and simulation of op amp integrator and its applications, International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249 – 8958, Volume-1, Issue-3, 12–19.
• Texas Instruments (2019). TMS320x2806x Technical Reference Manual, Erişim Adresi: https://www.ti.com/lit/ug/spruh18h/spruh18h.pdf (Erişim Tarihi: 07.05.2021)
• Wang, X., Zhou, K., Shen, S. (2021) Intelligent parameters measurement of electrical structure of medium frequency DC resistance spot welding system, Measurement, 171, 108795–108806, doi: 10.1016/j.measurement.2020.108795
• Ward, D.A., Exon, J.L.T. (1993) Using Rogowski coils for transient current measurements, Engineering Science and Education Journal, 2(3), 105–113, doi: 10.1049/esej:19930034
• Xia, Y. J., Zhang, Z. D., Xia, Z. X., Zhu, S. L., & Zhang, R. (2015) A precision analogue integrator system for heavy current measurement in MFDC resistance spot welding, Measurement Science and Technology, 27(2), 025104–025114, doi: 10.1088/0957-0233/27/2/025104
• Zhang, Y., Liu, J., Bai, G., & Feng, J. (2012) Analysis of damping resistor’s effects on pulse response of self-integrating Rogowski coil with magnetic core, Measurement, 45(5), 1277–1285, doi: 10.1016/j.measurement.2012.01.009
• Zhou K., Cai, L. (2011) Improvement in control system for the medium frequency direct current resistance spot welding system, Proceedings of the 2011 American Control Conference, 2657–2663, doi: 10.1109/acc.2011.5990827
• Zhou, K., Li, H. (2020) A comparative study of single-phase AC and medium frequency DC resistance spot welding using finite element modeling, IEEE Access, 8, 107260–107271, doi: 10.1109/access.2020.3000794
• Zhou, K., Yao, P. (2017) Review of application of the electrical structure in resistance spot welding, IEEE Access, 5, 25741–25749, doi: 10.1109/access.2017.2771310