Katmanlı Eğri Kompozit Çerçeve Yapıların Dinamik Kararlılık Analizi

Bu çalışmada tek ve iki bölütlü tabakalı eğri kompozit çerçeve yapıların dinamik kararlılık analizleri incelenmiştir. Bunun için, MATLAB ortamında yazılan bir bilgisayar kodu vasıtasıyla tabakalı kompozit eğri çerçeve yapıların doğal frekansları, kritik burkulma yükü ve birinci kararsızlık bölgeleri ele alınmıştır. Bu kapsamda hem tek bölütlü hem de çift bölütlü yapının eğrilik yarıçapının statik ve dinamik kararlılığı üzerine olan etkileri araştırılmıştır. Ayrıca, beş farklı fiber açısı düzeni dikkate alınarak farklı fiber açılarının da bu özellikler üzerindeki etkisi incelenmiştir. Kullanılan sonlu eleman modelinin doğruluğu aynı yapının ANSYS ortamında modellenmesi ve analizinden elde edilen sonuçlarla karşılaştırılarak sağlanmıştır. Çalışmanın sonucunda eğrilik yarıçapının yapının ilk beş doğal frekansı, kritik burkulma yükü ve birinci kararsızlık bölgesi üzerinde küçük bir etkisinin olduğu gözlemlenirken elyaf oryantasyonunun bu özellikler üzerinde kayda değer bir etki oluşturduğu tespit edilmiştir.

DYNAMIC STABILITY ANALYSIS OF THE LAMINATED COMPOSITE CURVED FRAME STRUCTURES

In this study, the dynamic stability analysis of the laminated composite single-bay and two-baycurved frame structures has been investigated. For this purpose, a computer code is written in MATLAB toevaluate the natural frequency values, critical buckling load, and first unstable regions of the laminatedcomposite curved frames. The effects of radii of curvature and stacking order on the static and dynamicstability of both single and two bay arch frame structures are investigated. Besides, the effects of thestacking order are investigated by considering five different stacking sequences. The results of the presentstudy are compared with the results obtained numerically via ANSYS for validation. It is concluded thatthe radius of curvature has a small effect on the first five natural frequency values, buckling loads, firstunstable regions of the structure, whereas the fiber orientation considerably has a considerable impact onsuch static and dynamic properties.

PDF

___

1. Alambeigi, K., Mohammadimehr, M., Bamdad, M. & Rabczuk, T. (2020). Free and forced vibration analysis of a sandwich beam considering porous core and SMA hybrid composite face layers on Vlasov’s foundation. Acta Mechanica, 231,3199-3218. https://doi.org/10.1007/s00707-020-02697-5
2. Bolotin, V. V. (1964). The dynamic stability of elastic systems. Holden-Day, San Fransisco.
3. Eken, S. (2019). Free Vibration Analysis of Composite Aircraft Wings Modeled as ThinWalled Beams with NACA Airfoil Sections. Thin-Walled Structures, 139,362–371. https://doi.org/10.1016/j.tws.2019.01.042
4. Gay, D. (2014). Composite Materials: Design and Applications. CRC Press, Florida
5. Glabisz, W., Jarczewska, K. & Hołubowski, R. (2020). Stability of nanobeams under nonconservative surface loading. Acta Mechanica, 231,3703–3714. https://doi.org/10.1007/s00707-020-02732-5
6. Goren Kiral, B., Kiral, Z. & Ozturk, H. (2015). Stability Analysis of Delaminated Composite Beams. Composites Part B: Engineering, 79, 406–418. https://doi.org/10.1016/j.compositesb.2015.05.008
7. Goyal, V.K. & Kapania, R.K. (2007). A Shear-Deformable Beam Element for the Analysis of Laminated Composites. Finite Elements in Analysis and Design, 43(6–7), 463–477. https://doi.org/10.1016/j.finel.2006.11.011
8. He, G. & Yang, X. (2014). Finite Element Analysis for Buckling of Two-Layer Composite Beams Using Reddy’s Higher Order Beam Theory. Finite Elements in Analysis and Design, 83, 49–57. https://doi.org/10.1016/j.finel.2014.01.004
9. Hodges, D. H., Atilgan, A. R., Fulton, M. V. & Rehfield, L. W. (1991). Free‐Vibration Analysis of Composite Beams. Journal of American Helicopter Society, 36(3):36–47. https://doi.org/10.4050/JAHS.36.36
10. Huang, S. & Qiao, P. (2020). Buckling of Thin-Walled I-Section Laminated Composite Curved Beams. Thin-Walled Structures, 154, https://doi.org/10.1016/j.tws.2020.106843
11. Kahya, V. (2016). Buckling Analysis of Laminated Composite and Sandwich Beams by the Finite Element Method. Composites Part B: Engineering, 91, 126–134. https://doi.org/10.1016/j.compositesb.2016.01.031
12. Ke, L.L., Yang, J. & Kitipornchai, S. (2013). Dynamic Stability of Functionally Graded Carbon Nanotube-Reinforced Composite Beams. Mechanics of Advanced Materials and Structures, 20(1), 28–37. https://doi.org/10.1080/15376494.2011.581412
13. Lee, J. & Kim, S.E. (2002). Lateral Buckling Analysis of Thin-Walled Laminated ChannelSection Beams. Composite Structures, 56(4), 391–399. https://doi.org/10.1016/S0263- 8223(02)00022-3
14. Machado, S.P. & Cortínez, V.H. (2009). Dynamic Stability of Thin-Walled Composite Beams under Periodic Transverse Excitation. Journal of Sound and Vibration, 321(1-2), 220–241. https://doi.org/10.1016/j.jsv.2008.09.026
15. Marur, S.R. & Kant, T. (1996). Free Vibration Analysis of Fiber Reinforced Composite Beams Using Higher Order Theories and Finite Element Modelling. Journal of Sound and Vibration, 194(3),337–351. https://doi.org/10.1006/jsvi.1996.0362
16. Ozturk, H. (2015). Vibration Analysis of a Pre-Stressed Laminated Composite Curved Beam. Steel and Composite Structures, 19(3), 635–659. https://doi.org/10.12989/scs.2015.19.3.635
17. Öztürk, H., Yeşilyurt, I. & Sabuncu, M. (2006). In-Plane Stability Analysis of Non-Uniform Cross-Sectioned Curved Beams, Journal of Sound and Vibration, 296(1–2), 277–291. https://doi.org/10.1016/j.jsv.2006.03.002
18. Petyt, M. (2010). Introduction to Finite Element Vibration Analysis. Cambridge University Press, New York.
19. Qin, B., Zhao, X., Liu, H., Yu, Y., & Wang, Q. (2020). Free Vibration Analysis of Curved Laminated Composite Beams with Different Shapes, Lamination Schemes, and Boundary Conditions. Materials, 13(4),1010, https://doi.org/10.3390/ma13041010
20. Saravia, C.M., Machado, S.P. & Cortínez, V.H. (2011). Free Vibration and Dynamic Stability of Rotating Thin-Walled Composite Beams. European Journal of Mechanics – A/Solids, 30(3), 432–441. https://doi.org/10.1016/j.euromechsol.2010.12.015
21. Smoljanović, H., Balić, I., Munjiza, A., Akmadžić, V. & Trogrlić, B. (2020). Analysis of dynamic stability of beam structures. Acta Mechanica, 231, 4701–4715. https://doi.org/10.1007/s00707-020-02793-6
22. Tsai, X.Y. & Chen, L.W. (2002). Dynamic Stability of a Shape Memory Alloy Wire Reinforced Composite Beam. Composite Structures, 56(3), 235–241. https://doi.org/10.1016/S0263-8223(02)00008-9
23. Vo, T. P., Thai, H.T. &Aydogdu, M. (2017). Free Vibration of Axially Loaded Composite Beams Using a Four-Unknown Shear and Normal Deformation Theory. Composite Structures, 178, 406–414.
24. Vo-Duy, T., Ho-Huu, V. & Nguyen-Thoi, T. (2019). Free Vibration Analysis of Laminated FG-CNT Reinforced Composite Beams Using Finite Element Method. Frontiers of Structural and Civil Engineering, 13(2),324–336. https://doi.org/10.1016/j.compstruct.2017.07.022
25. Wang, X., Zhu, X. & Hu, P. (2015). Isogeometric Finite Element Method for Buckling Analysis of Generally Laminated Composite Beams with Different Boundary Conditions. International Journal of Mechanical Sciences, 104, 190–199. https://doi.org/10.1016/j.ijmecsci.2015.10.008
26. Yeh, M.K. & Kuo, Y.T. (2004). Dynamic Instability of Composite Beams under Parametric Excitation. Composite Sciences and Technology, 64(12), 1885–1893. https://doi.org/10.1016/j.compscitech.2004.02.001
27. Zabihollah, A. & Ganesan, R. (2010). Buckling Analysis of Tapered Composite Beams Using a Higher Order Finite Element Formulation. Journal of Reinforced Plastics and Composites, 29(17), 2663–2683. https://doi.org/10.1177%2F0731684409352124