Kimyasal termomekanik hamur yöntemi

Bu çalışmada Mekanik Hamur üretim yöntemlerinden CTMP (kimyasal termomekanik hamur) üzerinde durulmuş ve diğer mekanik hamur üretim yöntemleriyle karşılaştırılarak üstün yanlarından bahsedilmiştir. CTMP’nin diğer mekanik hamurlardan daha üstün fiziksel niteliklere sahip olması onun daha farklı kullanım alanlarında değerlendirilmesini mümkün kılmaktadır. Ayrıca CTMP hamurlarının kullanım alanlarıyla ilgili genel bilgiler verilmiştir.

Anahtar Kelimeler:

odun, termokimyasal işlemler, kağıt hamuru üretimi, kimyasal işlemler, kağıt hamuru ve kağıt sanayi, işleme

The chemi-thermom-mechanical process

In this study, one of the mechanical pulping method, CTMP was analyzed and compared with the other mechanical pulping method. The advantages of the CTMP process were discussed. Pulp produced with CTMP method having higher physical properties than others.this is advantage of CTMP that could be directed using in various purposes.

Keywords:

wood, thermochemical processes, pulping, chemical treatment, pulp and paper industry, processing,

PDF

___

Akerlund, G. and Jackson, M., 1984. Manufacture and end-use application of CTMP and CMP from softwoods and hardwoods, EUCEPA Chemical Processes in Pulp and Paper Technology Proceedings, EUCEPA, Torremolinos, p. 171.

Akerlund, G. and Jackson, M., 1984. CTMP-The pulp of the future, SPCI World Pulp and Paper Week Proceedings, SPCI, Stockholm, p. 42.

Engstrand, P., Hammar, L. A., Htun, M., 1985. The kinetics of sulfonation reactions on Norwegian spruce, International Symposium on Wood and Pulping Chemistry Notes, CPPA, Montreal, p.275.

Eroğlu, H., 1990. Kağıt ve Karton Üretim Teknolojisi, K.T.Ü. Orman Fak., Fakülte Yayın No: 6, Trabzon, 623.

Ferritius, O. and Moldenius, S., 1985. The effect of impregnation method on CTMP properties, International Mechanical Pulping Conference Proceedings, SPCI, Stockholm, p. 91.

Giertz, H. W., 1977. Basic wood raw material properties and their significance in mechanical pulping, International Mechanical Pulping Conference Proceedings, The Finnish Paper Engineers Association, Helsinki, p. 1:1.

Gullichsen, J., Paulapuro, H., Sundholm, J., 1999. Mechanical Pulping, Book 5, Papermaking Science and Technology, Published by Fabet OyPublished in Cooperation with the Finnish Paper Engineers Association and TAPPİ, Finland.

Kırcı, H., 2003. Kağıt Hamuru Endüstrisi Ders Notları (Geliştirilmiş 2. Baskı), K.T.Ü. Orman Fak., Yayın No: 72, Trabzon, 291.

Kurra, S., Lindholm, C. –A., Virkola, N., 1985. Effect of uneven impregnation in chemimechanical pulping, International Mechanical Pulping Conference Proceedings, SPCI, Stockholm, p. 80.

Vikström, B. And Hammar, L., 1981. Softening of spruce wood during sulfite pulping and its relevance for the character of high yield pulps, International Symposium on Wood and Pulping Chemistry Notes, SPCI, Stockholm, p. V:. 112.