Introducing Students to Communications Concepts Using Optical and Low-Power Wireless Devices

Wireless communication has become an important feature for commercial products and a popular research topic within the last ten years. There are now more mobile phone subscriptions than wired-line subscriptions. Lately, one area of commercial interest has been low-cost, low-power, and short-distance wireless communication used for "personal wireless networks." Technology advancements are providing smaller and more cost effective devices for integrating computational processing, wireless communication, and a host of other functionalities. These embedded communications devices will be integrated into applications ranging from homeland security to industry automation and monitoring. They will also enable custom tailored engineering solutions, creating a revolutionary way of disseminating and processing information. With new technologies and devices come new business activities, and the need for employees in these technological areas. Engineers who have knowledge of embedded systems and wireless communications will be in high demand. Unfortunately, there are few affordable environments available for development and classroom use, so students often do not learn about these technologies during hands-on lab exercises. The goal of a development and teaching effort was to create a low-power embedded system that could be used to teach wireless communication hardware and protocols. This paper presents the experiences of introducing board-to-board communication concepts and hardware into the classroom. The communication mediums were twisted pair, optical fiber, infrared, and finally wireless radio. Also addressed are specific assessments of student skills that were needed as a prerequisite and successes based on prerequisites. A design of additional hardware is presented. Also, a future class that builds on these tools is suggested.

Anahtar Kelimeler:

Embedded systems, wireless communications, hands-on learning, IEEE 802.15.4, Bluetooth, optical, infrared

Introducing Students to Communications Concepts Using Optical and Low-Power Wireless Devices

Keywords:

Embedded systems, wireless communications, hands-on learning, IEEE 802.15.4, Bluetooth, optical, infrared,

PDF

___

IEEE Computer Society/ACM Task Force on Computing Curriculum, Computing Curricula - Computer Engi- neering Final Report, Dec. 4, 2004 (http://www.eng.auburn.edu/ece/CCCE/)
J.M. Conrad, ECGR4101/5101 Course website, http://www.coe.uncc.edu/∼jmconrad/classes.htm.
HFBR-1412: http://www.home.agilent.com/USeng/nav/-536893520.536885518/pd.html
HFBR-2412: http://www.home.agilent.com/USeng/nav/-536893511.536885490/pd.html
J.M. Kahn and J.R. Barry, “Wireless infrared communications”, Proceedings of the IEEE, Vol. 85, No. 2, pp. – 298, Feb. 1997.
M.F.L. Abdullah, R. Green and M. Leeson, “Optical wireless communication front-ends”, High Frequency Postgraduate Student Colloquium, 2004, pp. 3 – 8, 6-7 Sep. 2004.
J.M. Conrad, Infrared Experiment website, http://www.coe.uncc.edu/∼jmconrad/EducationalMaterials/IR.html. B. Kamali, “Development of an undergraduate structured laboratory to support classical and new base tech- nology experiments in communications,” IEEE Transactions on Education, Vol. 37, No. 1, pp. 97-105, Feb. B. Kamali, “A Three-Level Structured Laboratory to Support Traditional and New-Base Technology Experi- ments in Communications,” NSF Award No. 9153146, University of Texas at San Antonio, May 15 1991 to Oct. 1993.
L Sevgi, “EMC and BEM engineering education: Physics-based modeling, hands-on training and challenges,” IEEE Antennas and Propagation Magazine, Vol. 45, No. 2, pp. 114-119, Apr. 2003.
V.E. DeBrunner, L.S. DeBrunner, S. Radhakrishnan and K. Kamal, “The telecomputing laboratory: A multi- purpose laboratory,” IEEE Transactions on Education, Vol. 44, No, 4, pp. 302-310, Nov. 2001.
M. Munoz and S. Garrod, “In process development of an advanced undergraduate communications laboratory,” Proceedings of the Frontiers in Education Conference, pp. 271-275, 1997.
A. Behagi, “Development of a wireless and satellite communication laboratory at Penn State Harrisburg,” Proceedings of the 1997 ASEE Annual Conference, Milwaukee, WI, USA, Jun. 15-18 1997.
E. Bertran, F. Tarres and G. Montoro, “Experimental course on digital communications,” Proceedings of the IEEE International Conference on Electronics, Circuits, and Systems, Vol. 3, pp. 321-324, Sep. 7-Sep. 10 1998.
W.D. Lane, “Textbook principles to communications hardware: Making it work,” Proceedings of the Frontiers in Education Conference, pp. 1504-1507, 1996.
B. Richards and N. Waisbrot, “Illustrating networking concepts with wireless handheld devices,” Proceedings of the Annual SIGCSE Conference on Innovation and Technology in Computer Science Education, pp. 29-33, R. Smith, “Integration of Wireless Technologies into an Undergraduate Networks Exploration Laboratory,” NSF Award No. 0125635, Jacksonville State University, Jun. 1 2002 to May 31 2005.
F.L Fontaine, “Wireless Communications Systems Design Laboratory,” NSF Award No. 9850785, Cooper Union, Jul. 1 1998 to Jun. 30 2000.
P.M. Shankar and B.A. Eisenstein, “Project-based instruction in wireless communications at the junior level,” IEEE Transactions on Education, Vol. 43, No. 3, pp. 245-249, Aug. 2000.
P.M. Shankar, Introduction to Wireless Systems, New-York Wiley, 2002.
J.M. Conrad, S. Lasassmeh, I. Vakil and B. Levine, “Teaching Optical Communications Concepts in Embedded Systems Courses,” Proceedings of the 2005 Frontiers in Education Conference, pp. T4C: 28-33, Oct. 2005.
J.M. Conrad and I Howitt, “Software and Hardware Tools for Teaching Communicatons Concepts and Intro- ducing Students to Low-Power Wireless Communications,” Proceedings of the 2004 International Conference on
Engineering Education, pp.MM7: 1-7, Oct. 2004.