INVESTIGATION OF FATIGUE BEHAVIOR OF COLLETS WITH MATERIAL STANDARD SAE 4140 AND 50CRMO4 BY ANSYS FINITE ELEMENT METHOD AND FATIGUE TEST DEVICE

INVESTIGATION OF FATIGUE BEHAVIOR OF COLLETS WITH MATERIAL STANDARD SAE 4140 AND 50CRMO4 BY ANSYS FINITE ELEMENT METHOD AND FATIGUE TEST DEVICE

In this study, the previously designed SAE 4140 and 50CrMo4 material standard lathe collets was found to be inadequate in terms of service life and the new 50CrMo4 material standard collet was designed. Fatigue tester was designed and manufactured for fatigue analysis to determine the life of the collet. When designing fatigue tester, 2.2 kW Volt motor and Siemens control are used for field usage conditions. Analyzes were made with ANSYS software then the collets were tested under 25 bar hydraulic pressure and the results were compared. As a result of analysis and fatigue tests, fatigue behaviors of collets were compared.

___

  • Deng H ‐L., Liu H, Liu Q ‐C., Guo Y ‐P., Yu H. Fatigue strength prediction of carburized 12Cr steel alloy: Effects of evaluation of maximum crack sizes and residual stress distribution. Fatigue Fract Eng Mater Struct 2019; ffe.13149.
  • Maierhofer J, Pippan R, Gänser HP. Modified NASGRO equation for physically short cracks. Int J Fatigue 2014; 59:200–207.
  • Luke M, Varfolomeev I, Lütkepohl K, Esderts A. Fracture mechanics assessment of railway axles: Experimental characterization and computation. Eng Fail Anal 2010; 17:617–623.
  • Luke M, Varfolomeev I, Lütkepohl K, Esderts A. Fatigue crack growth in railway axles: Assessment concept and validation tests. Eng Fract Mech 2011; 78:714–730.
  • Sander M, Richard HA. Investigations on fatigue crack growth under variable amplitude loading in wheelset axles. Eng Fract Mech 2011; 78:754–763.
  • Zerbst U, Schödel M, Beier HT. Parameters affecting the damage tolerance behaviour of railway axles. Eng Fract Mech 2011; 78:793–809.
  • Zerbst U, Beretta S, Köhler G, Lawton A, Vormwald M, Beier HT, Klinger C, Černý I, Rudlin J, Heckel T, Klingbeil D. Safe life and damage tolerance aspects of railway axles - A review. Eng Fract Mech 2013; 98:214–271.
  • Zerbst U, Klinger C, Klingbeil D. Structural assessment of railway axles - A critical review. Eng Fail Anal 2013; 35:54–65.
  • ŞIK A, Önder M, KORKMAZ MS. Taşıt Jantlarının Yapısal Analiz İle Yorulma Dayanımının Belirlenmesi. Gazi Üniversitesi Fen Bilim Derg Part C, Tasarım Ve Teknol GU J 2015; 3:565–574.
  • KARAMANGİL Mİ. Bir Otomobil Arka Dingilinin Sonlu Elemanlar Metodu ile Yorulma Analizi. PAMUKKALE Univ Eng Fac J Eng Sci 2007; 13:311–318.
  • ŞIK A. MIG/MAG Kaynak Yöntemi ile Birleştirilen Çelik Malzemelerde İlave Tel Türleri ve Koruyucu Gaz Karışımlarının Eğmeli Yorulma Ömürlerine Etkilerinin Araştırılması. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Derg 2013; 22:769–777.
  • Babuška I, Sawlan Z, Scavino M, Szabó B, Tempone R. Spatial Poisson processes for fatigue crack initiation. Comput Methods Appl Mech Eng 2019; 345:454–475.
  • Campbell FC. Elements of Metallurgy and Engineering Alloys. 2008.
  • Tosun K. Yapı Malzemesi-I. no date; .
  • Stephens RI, Fatemi A, Stephens RR, Fuchs HO. Metal Fatigue in Engineering. Wiley & Sons, Inc.; 2000.
  • Gençoğlu O. Malzemelerde Yorulma Davranışı. 2013; .
  • Krupp U. Fatigue Crack Propagation in Metals and Alloys. Wiley-VCH; 2007.
  • Glodež S, Šori M, Kramberger J. A statistical evaluation of micro-crack initiation in thermally cut structural elements. Fatigue Fract Eng Mater Struct 2013; 36:1298–1305.
The International Journal of Materials and Engineering Technology-Cover
  • Yayın Aralığı: Yılda 2 Sayı
  • Başlangıç: 2018
  • Yayıncı: Necip Fazıl YILMAZ
Sayıdaki Diğer Makaleler

ANALYSIS OF WIND TURBINE BLADE PITCH ANGLE CONTROL WITH FUZZY LOGIC

Atakan ARSLAN, Halil EROL

ELECTROCHEMICAL BEHAVIOUR AND PERFORMANCE OF FLEXIBLE GRAPHITE YARNS IN DIFFERENT ELECTROLYTES WITH WIDE POTENTIAL WINDOW OF 2 V

Mahmut Furkan KALKAN, Murat ARTAN, Hasan Mithat DELİBAŞ, Abdulcabbar YAVUZ, Necip Fazıl YILMAZ

EFFECT OF PROPELLERS NUMBERS AND HORIZONTAL DISTANCE IN DESIGN OF VTOL

Mustafa VARKİ, Eyüp YETER, Mehmet Hanifi DOĞRU

ANALYSIS OF MECHANICAL BEHAVIOR OF TERMOPLASTIC COMPOSITES

Ali Taner KUZU, Elifnur KÖSEMEN, Aysu Hande YÜCEL, Mustafa BAKKAL

OPTIMIZATION OF THE MECHANICAL PROPERTIES OF STERCULIASETIGERADELILE FIBRE EPOXY COMPOSITE USING TAGUCHI METHODOLOGY

Nasır MOHAMMED TAHIR, Adamu Umar ALHAJİ, Ibrahim ABDULLAHİ

INVESTIGATION OF THE HUB DIAMETER EFFECT ON PROPELLER THRUST

Enes COŞKUN, Mehmet Hanifi DOĞRU

A STUDY ON THE DESIGN AND PERFORMANCE ANALYSIS OF AN AIR-COOLED WASTE HEAT RECOVERY SYSTEM FOR USE IN MOTORCYCLE ENGINES

Haluk GÜNEŞ, Mehmet Akif KUNT

EFFECT OF DIFFERENT AMOUNTS OF CARBON FIBER ADDITIVE ABS ON THERMAL DISTORTION AND COOLING TIME

Ömer EYERCİOĞLU, Engin TEK, Mehmet ALADAĞ, Gülağa TAŞ

SOLID PARTICLE EROSION PERFORMANCE OF MICRO ARC OXIDATION and ELECTRO SPARK DEPOSITION COATED Ti6Al4V SHEETS

Doğan ACAR, Salim Levent AKTUĞ, Kemal KORKMAZ, Salih DURDU, Ömer Necati CORA

INVESTIGATION OF FATIGUE BEHAVIOR OF COLLETS WITH MATERIAL STANDARD SAE 4140 AND 50CRMO4 BY ANSYS FINITE ELEMENT METHOD AND FATIGUE TEST DEVICE

Oğuzcan GÜZELİPEK, Tuğrul SOYUSİNMEZ, Furkan ÇETİN