TS 825 Standardı: Güncellemeler Üzerine Kritik Bir Değerlendirme

Bina enerji performansının en baskın parametresi, bina kabuğunun binanın bulunduğu iklim şartlarına göre göstereceği ısıl davranışa bağlı ısıtma ve soğutmaenerjisi ihtiyacıdır. Bu sebeple, ısıtma ve soğutma enerjisi ihtiyacını belirlerken,bina kabuğunun ısıl davranışa bağlı olarak yapılacak analizlere göre tasarlanmasıönem arz etmektedir.Ülkemizde bina kabuğu detayının belirlendiği ve zorunlu olarak uygulanan TS 825Standardı ile binaların ısıtma enerjisi ihtiyacının sınırlandırılması öngörülmüştür.Ancak, bu standardın, ısıtma gereksinimine yönelik olarak düzenlendiği için, soğutma yükünün yüksek olduğu binalarda ne kadar sağlıklı sonuçlar verdiği belirsizdir.Ayrıca ilgili standart; iklim ve konfor şartlarının değiştiği ve teknolojik gelişmeleringetirdiği yeni nesil malzemelerin de kullanımda olduğu düşünüldüğünde günümüzde güncel olmaktan uzaktır.Bu çalışmada, TS 825 Standardı'nın eksik yönleri ve yenilenmesi halinde eklenmesive iyileştirme yapılması gereken noktalar teknik olarak değerlendirilmiştir.

TS 825 Standard: A Critical Evaluation on Updates

Depending on the thermal behavior of the building shell according to the climatic conditions, most dominant parameters for building energy performance are the heating and cooling energy needs. Therefore, while determining the need for heating and cooling energy, it is important to perform analyses for designing the building envelope considering the thermal behavior of it. In our country, it is desired to limit the heating energy need of the buildings by the TS 825 Standard which is mandatory and in which the envelope details are determined. But as this standard only calculates the heating needs, it is not clear how accurate results could be achieved for buildings with high cooling loads. Additionally, due to change in climate and comfort conditions and use of new generation materials regarding technological developments, the standard is out of date nowadays. This study focuses on deficiencies of the current TS 825 Standard and technically evaluates issues which need to be added or improved in case of a renewal prosess.

___

  • [6] TS 825 Standardı 2008.
  • [7] EN ISO 52016-1:2017, Energy performance of buildings – Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads – Part 1: Calculation procedures”.
  • [8] CEN ISO/TR 52016-2:2017, “Energy performance of buildings – Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads – Part 2: Explanation and justification of ISO 52016-1 and ISO 5207- 1”.
  • [9] EN ISO 52017-1, “Energy performance of buildings – Sensible and latent heat loads and internal temperatures – Part 1: Generic calculation procedures”.
  • [10] PD CENISO/TR 52017-2 (EPB), “Building and building elements – Calculation of the dynamic thermal balance in a building or building zone – Part 2: Explanation and justification of ISO 52017-1”.
  • [11] Dağsöz, A.K., Bayraktar, K.G., “Türkiye’de derece gün sayıları ve enerji politikalarımız”, İzocam Yayınları, A- 8, 1995.
  • [12] Lsti̇bure, J.W., “Hygrothermal climate regions, interior climate classes and durability”, Proceedings of the 8th Conference on Building Science and Technology, Toronto, Canada, 2001; 319-29.
  • [13] Sahal, N., “Proposed approach for defining climate regions for Turkey based on annual driving rain index and heating degree-days for building envelope design”, Building and Environment 41, 2006; 520-526.
  • [14] Dombayci, Ö. A., “Degree-days maps of Turkey for various base temperatures” Energy, 2009.
  • [15] Büyükalaca, O., Bulut, H., Yilmaz, T., “Türkiye için ısıtma ve soğutma derece-gün bölgeleri”, 16. Ulusal Isı Bilimi ve Tekniği Kongresi, 2007.
  • [16] Satman, A., Yalcinkaya, N., “Heating and cooling degree-hours for Turkey”, Energy, Volume 24, Issue 10, 1999; 833-840.
  • [17] Üner, M., İleri, A., “Typical weather data of main Turkish cities for energy applications”, International Journal of Energy Research, 2000; 24: 727-748.
  • [18] Büyükalaca, O., Bulut, H., Yilmaz, T., “Analysis of variable-base heating and cooling degree-days for Turkey”, Applied Energy, Volume 69, Issue 4, August 2001; 269-283.
  • [19] ASHRAE, “ASHRAE Handbook: Fundamentals”, ASHRAE: Atlanta, 2009.
  • [20] Ertürk, M., Kurt, H. A., Kiliç, A., Kara, S., “Isıtma soğutma derece saat hesaplamalarında enlem-boylam-rakım ilişkisinin Marmara Bölgesi için araştırılması”, Tesisat Mühendisliği, Sayı: 150, 2015.
  • [21] Bayram, M., Yeşi̇lad, B., “Isıtma ve soğutma derece gün sayılarının entegrasyonu”, Teskon 2009 Bildirisi, 2009.
  • [22] Bolattürk, A., “Optimum insulation thickness for buildings walls with respect to cooling and heating degree-hours in the warmest zone of Turkey”, Building and Environment, 43, 1055- 1064, 2008.
  • [23] İnternet: “https://www.mgm.gov.tr/”
  • [24] İnternet: “https://beptr.csb.gov.tr/bep-web/#/”
  • [25] İnternet: “https://bevap.csb.gov.tr/proje-dokumanlari-i-231”