Fan Coil Ünitesi Komponentlerinin Bütünleşik Performansının Değerlendirilmesi

Fan coil üniteleri, ısıtma, soğutma, havalandırma ve iklimlendirme sektöründe, iç mekânlarda en çok tercih edilen cihazlardır. Bu cihazlar iç mekânlarda çalıştığı için verimli ve sesiz çalışmaları büyük önem taşımaktadır. Bu çalışmada, bir fan coilde havanın akış yapısı deneysel ve sayısal olarak incelenmiştir. Pazarda en sık kullanılan gizli tavan tipi bir fan coil ünitesi üzerinde performans testleri üç farklı fan hızında uluslararası standartlara uygun tasarlanan bir test sisteminde yapılmıştır. Hava akış simülasyonları için Flow Vision HPC sürüm 3.08 yazılımı kullanılmıştır. Testler için kullanılan fan coil sayısal olarak analiz edilmiş, simülasyon sonuçları test sonuçları ve batarya üreticisinin verdiği veriler ile karşılaştırılarak sayısal simülasyonlar doğrulanmıştır. Simülasyonlar ile elde edilen hız ve basınç dağılımlarından yararlanılarak, batarya yüzeyindeki akış yapısı analiz edilmiştir. Bu analizler ile batarya-fan arasındaki mesafenin batarya üzerindeki hız dağılımını etkilediği görülmüştür. Akış analizlerinde yüksek fan hızında, diğer hızlara göre daha kritik akış olduğu tespit edilmiştir. Çalışmanın sonunda, yüksek fan hızında, fan ve batarya arasındaki mesafeyi değiştirerek, batarya yüzeyinde daha homojen hava hızı dağılımı elde edilebilindiği düşünülmüştür.

Integrated Performance Evaluation of Fan Coil Unit Components

Fan coil units are the most preferred devices for indoor locations in heating, ventilating, air conditioning and refrigeration sector. Due to being indoor unit, efficient and quiet operating of these units is so important. Experimental and numerical study on airflow structure of a fan coil unit was investigated in this paper. Performance tests of a concealed type unit which is frequently used one were done in three different fan speeds. Flow Vision HPC version 3.08 software was used for simulating the airflow. Numerical analysis of the fan coil used for tests was done, the results of simulations were verified by comparing them with test results and technical information given from the coil manufacturer. Airflow structures were analyzed by utilizing the velocity and pressure contours obtained from simulations. By analyzing the results was found out that the distance between fan and coil affects the velocity contours over the coil. In flow analysis, the high fan speed state were determined more critical compared with others. At the end of the study, in high fan speed state, by changing the distance between fan and coil and checking the uniformity of air spreading over coil, obtaining more homogeneous air velocity spreading on coil was considered.

___

KAYNAKLAR Wang, C., Chang, C. T., Heat And Mass Transfer For Plate Fin-And-Tube Heat Exchangers, With And Without Hydrophilic Coating, Taiwan, Yuan-Ze University. ANSI/AMCA 210 Standard, Laboratory Methods of Testing Fans for Ratings, Air Movement and Control Association International, INC, 4-50, 1999. ANSI/ASHRAE Standard 79-2002, Method of Testing For Rating Fan Coil Conditioners, Atlanta, American Society of Heating, Refrigerating ans Air-Conditioning Engineers, 2-14, RA 2006. Eurovent RS 6/C/002, Rating Standard For The Certification Of Non-Ducted Fan Coil Units, Paris, Eurovent Certita Certification, 4-9, 2017. ASHRAE Handbook, Fundamentals. Atlanta, American Society of Heating, Refrigerating ans Air-Conditioning Engineers, 1-16, 2013. Morvay, Z. K., Gvozdenac, D. D., Thermodynamic and Transport Properties Of Moist Air, John Wiley & Sons. Türk Standardı TS EN 1397, Isı Değiştiricileri-Isıtıcı Soğutucu Fan Coil Üniteleri-Performans Tayini İçin Test Metodları. Ankara: Türk Standardları Enstitüsü, 2000. Eurovent 6/3, Thermal Test Method For Fan Coil Units, Paris, Eurovent/Cecomaf, 1996. Genceli, O., Ölçme Tekniği. İstanbul, Birsen Yayınevi, 23-29, 2000. Malalasekera, W., Versteeg, H. K., An Introduction to Computational Fluid Dynamics (Second Edition), Harlow: Pearson Educated Limited. AHRI Standard 440, Performance Rating Of Room Fan Coils, Arlington: Air-Conditioning, Heating And Refrigeration Institute, 2008. Incropera, F. P., Principles of Heat and Mass Transfer (Seventh Edition), Hoboken, John Wiley & Sons, 5-66. Flow Vision HPC Manual (Version 3.08.03), Belgium, CAPVIDIA, 1999-2012.