Yunus Emre ÇETİN, Mete AVCI, Ali Orhan AYDIN

Bir Ameliyathane İçin Çıkış Menfez Konumunun Temizleme Süresine Etkisi

Bu çalışmada, bir ameliyathane için çıkış menfez konumunun temizleme süresine (recovery time) etkisi sayısal olarak incelenmiştir. Çıkış menfezi, zemin seviyesinde, tavan seviyesinde ve hem tavan hem de zemin seviyesinde olmak üzere üç farklı şekilde yerleştirilmiştir. Kirletici olarak, 0,5 µm boyutunda partiküller ameliyathaneye homojen olarak dağıtılmış ve seyrelme süreçleri karşılaştırılmıştır. En düşük temizleme süresi zemin ve tavan seviyesinde yer alan çıkış menfezlerinin beraber kullanıldığı durumda elde edilmiştir.

The Effect of Outlet Vent Location on Recovery Time for an Operating Room

In this study, effect of exhaust location on the recovery time for an operating room is investigated numerically. the exhaust location is examined for three configurations as at floor level, ceiling level and both at ceiling and floor level. As contaminants, particles of 0,5 µm diameter are distributed homogeneously to the operating room and the decay processes are compared. It is found that the lowest recovery time is obtained when the exhaust vents in the floor and ceiling level are used together.

PDF

___

[1] Barie, P. S., “Surgical Site Infections: Epidemiology and Prevention”, Surgical Infections, 3, 9-21, 2002.
[2] Terzi, C., “Cerrahi Alan Enfeksiyonu Yönetimi”, Yoğun Bakım Dergisi, 6 (Ek 1), 18-26, 2006.
[3] Thomas, C., Cadwallader, H. L., Riley, T. V., “Surgical Site Infections After Orthopaedic Surgery: Statewide Surveillance Using Linked Adminstrative Databases”, J Hosp Infect, 57, 25-30, 2004.
[4] DIN 1946-4, “Hastane Havalandırması”, 2008.
[5] Kuelpmann, R., Christiansen, B., Kramer, A., Luederitz, P., Pitten, F. A., Wille, F., Zastrow, K. D., Lemm, F., Sommer, R., Halabi, M., “Hygiene Guideline for the Planning, Installation, and Operation of Ventilation and Air-Conditioning Systems in Health-Care Settings– Guideline of the German Society for Hospital Hygiene (DGKH)”, GMS Hygiene and Infection Control, 11, 2016.
[6] Chen, Q., Jiang, Z., Moser, A., “Control of Airborne Particle Concentration and Draught Risk in an Operating Room”, Indoor Air, 2, 154-167, 1992.
[7] Memarzadeh, F., Manning, A. P., “Comparison of Operating Room Ventilation Systems in the Protection of the Surgical Site”, ASHRAE Transactions, 108, 3, 2002.
[8] Zhai, Z. J., Osborne, A. L., “Simulation-Based Feasibility Study of Improved air Conditioning Systems for Hospital Operating Room”, Frontiers of Architectural Research, 2, 468-475, 2013.
[9] Sadrizadeh, S., Holmberg, S., Tammelin, A., “A numerical Investigation of Vertical and Horizontal Laminar Airflow Ventilation in an Operating Room”, Building and Environment, 82, 517-525, 2014.
[10] Balocco, C., Petrone, G., Cammarata, G., “Thermo-Fluid Dynamics Analysis and Air Quality for Different Ventilation Patterns in an Operating Theatre”, International Journal of Heat and Technology, 33, 25-32, 2015.
[11] Chow, T. T., Lin, Z., Bai, W., “The Integrated Effect of Medical Lamp Position and Diffuser Discharge Velocity on Ultra-Clean Ventilation Performance in an Operating Theatre”, Indoor and Built Environment, 15, 315-331, 2006.
[12] Al-Waked, R., “Effect of Ventilation Strategies on Infection Control Inside Operating Theatres”, Engineering Applications of Computational Fluid Mechanics, 4, 1-16, 2010.
[13] Aganovic, A., Cao, G., Stenstad, L. I., Skogas, J. G., “Impact of Surgical Lights on the Velocity Distribution and Airborne Contamination Level in an Operating Room With Laminar Airflow System”, Building and Environment, 126, 42-53, 2017.
[14] Zhai, Z., Zhang. W., Chen, Q., “Evaluation of Various Turbulence Models in Predicting Airflow and Turbulence in Enclosed Environments by CFD: Part 1 Summary of Prevalent Turbulence Models”, HVAC&R Res., 13, 37- 41, 2007.
[15] Kuznik, F., Rusaouen, G., Brau, J., “Experimental and Numerical Study of a Full Scale Ventilated Enclosure: Comparison of Four Two Equations Closure Turbulence Models”, Building and Environment, 42, 1043-1053, 2007.
[16] Zhao, B., Zhang, Y., Li, X., Yang, X., Huang, D., “Comparison of Indoor Aerosol Particle Concentration and Deposition in Different Ventilated Rooms by Numerical Method”, Building and Environment, 39, 1-8, 2004.
[17] ANSYS Fluent 16.0, “Theory Guide”, Ansys Inc, 2011.
[18] ISO 14644, “Cleanrooms and Associated Controlled Environments-Part 3 Test Methods”, 2005.