THE EFFECTS OF WIDTH OF THE FABRIC, FABRIC AND MODEL TYPE ON THE EFFICIENCY OF MARKER PLAN IN TERMS OF APPAREL

Konfeksiyonda ürün maliyetinin yaklaşık olarak yarısını hammadde olan kumaş maliyeti oluşturmaktadır. Bu nedenledir ki, kumaşın verimli bir şekilde kullanılması son derece önemlidir. Bu çalışmada örme üst grup giysilerden altı farklı model seçilmiştir. Modellerin kalıp sayılarının ve kalıp şekillerinin farklı olmasına dikkat edilmiştir. Bu modellerin, üç farklı kumaş eninde ve dört farklı kumaş türünde, Gemini Nest Expert programı kullanılarak kesim yerleşim planı (pastal resimleri) hazırlanmıştır. Model türü, kumaş eni ve kumaş çekme değerleri bağımsız değişkenler, pastal resmi verimliliği ise bağımlı değişken olarak seçilmiştir. Elde edilen veriler analiz edilerek, yorumlanmıştır

ÖRME KONFEKSİYONDA KUMAŞ ENİ İLE KUMAŞ VE MODEL TÜRÜNÜN PASTAL RESMİ VERİMLİLİĞİNE ETKİLERİ

The cost of the fabric which is the raw material of apparel constitutes approximately the half of the total product cost. Consequently, it is very important that the fabric be used efficiently. In this study, six different models from upper group garments are chosen. The numbers and shapes of patterns of the models are carefully selected to be different from each other. The marker (cutting) plans of these models are prepared in three different fabric widths and four different fabric types with Gemini Nest Expert Program. Model type, width of the fabric and shrinkage values are selected as independent variables and efficiency of marker plan as dependent variable. The obtained data is analyzed and interpereted

PDF

___

1. Kaftan, H., 2007, “Preparing, Grading and Analysis of Patterns in Women Tricot Outfit Apparel”, Post Graduate Thesis, Selcuk University, Graduate School of Social Sciences, Department of Education of Clothing Industry and Art of Clothing, Konya, Turkey (In Turkish).
2. Erdoğan, M.Ç., 1999, “Determining of the Ideal Fabric Width of the Internal Market Production Classical Men's Shirt”, Tekstil ve Konfeksiyon, Number:9(5), pp: 397-402 (In Turkish).
3. Utkun, E., Öndoğan, Z., 2012, “Determination of the Ideal Fabric Width of the Classical Women’s Blouse Models Made From Buldan Cloth”, Tekstil ve Konfeksiyon, Number 3, pp: 258-267.
4. Paşayev, N., 2010, “Investigating The Effects of Production Planning on Fabric Costs in Confection Production”, Tekstil ve Konfeksiyon, Number 3, pp: 262-270 (In Turkish).
5. Erdoğan, Ç., 1991, “Determination of the Ideal Fabric Width in Work Clothing Manufacture”, Tekstil ve Konfeksiyon, Number 6, pp: 593- 599.
6. Boz, S., Öndoğan, Z., 2012, “An Investigation on the Cutting Parameters for Various Types of Fabrics”, Tekstil ve Konfeksiyon, Number 1, pp: 52-57 (In Turkish).
7. Yılmaz, N., 2007, “A Research on Cloth Waste and Cost in an Apparel Enterprise”, Post Graduate Thesis, Istanbul Technical University, Graduate School of Science, Istanbul, Turkey, 205 pages (In Turkish).
8. Göksel, N., Utkun, E., Öndoğan, Z., 2012, Use of Computer Aided Pattern Preparation Method in Clothing Designing, Tekstil ve Konfeksiyon, Number 4, pp: 375-382.
9. Öndoğan, Z., 1998, Computer Aided Design, Implementation and Compliance of the Pattern Cutting Plan Preparation System of Apparel Business, Tekstil ve Konfeksiyon, Number: 8 (3), pp: 208-213.
10. Bilgiç, H., 2009, “Optimizing Cutting Placement Plans in Terms of Decreasing Fabric Losses in Trousers Production”, Post Graduate Thesis, Erciyes University, Graduate School of Science, Kayseri, Turkey, 177 pages (In Turkish).
11. Bilgiç, H., 2015, “Effects Of Fabric Width And Types And Models Of Fabric On Cutting Placement Plan Efficiency”, PhD Thesis, Çukurova University, Institute Of Natural And Applied Sciences, Department Of Textile Engineering, Adana, Türkiye (In Turkish).
12. Demirhan, F., Meriç B., 2005, “The Searching of Dimensional Changes on The Knitted Fabrics and Garments after Washing and Drying”, Pamukkale University Journal of Engineering Sciences, Vol. 11. Number 3 pp: 381-390 (In Turkish).
13. Duru Baykal, P., 2013, “Quality Management in Confeciton Enterprises”, Post Graduate Lecture Notes, Çukurova University, Department of Textile Engineering, Adana, Turkey (In Turkish).
14. Karaman, M, 1994, “Quality Management and Control Techniques in Clothing Industry”, Lecture Notes, Marmara University, Faculty of Technical Education, Department of Textile Education, Istanbul, Turkey (In Turkish).