THE EFFECTS OF RAW MATERIAL, WEFT SETTING AND WEAVE ON THE BREAKING STRENGTH, ELONGATION AT BREAK AND TEAR STRENGTH OF UPHOLSTERY DOUBLE FABRICS
Öz
The aim of this study is to investigate the effects of structural properties of yarn and fabric such as; raw materials, weft setting and fabric construction on the breaking strength, elongation at break and tear strength of upholstery double fabrics. For this purpose, double woven fabric samples with three different weft densities and of three different weave patterns with two types of warp and weft yarns, whose raw materials were different, were manufactured. The physical properties of woven fabric samples were determined by relevant tests. The effect of the fibre type, weft setting and weave pattern on the physical properties of upholstery fabrics were investigated by variance analysis by means of SPSS 15.0. Findings and evaluations of the study have been given in detail in the paper.
___
- 1. Başer, G., 2004, Dokuma Tekniği ve Sanatı, Cilt 1, Punto Publishing.
- 2. Okur, A., 2002, Tekstil Materyallerinde Mukavemet Testleri, DEÜ Engineering Faculty Press, No. 303.
- 3. Ünal, P. and Taşkın, C., “% 100 Poliester Kumaşlarda Dokunun ve Sıklıkların Kopma Mukavemetine Etkisi”, Tekstil ve Konfeksiyon, 2007/2, p.115-118.
- 4. Oğulata, R.T. and Kadem, F.D., “Boyalı İpliklerden Üretilen Farklı Konstrüksiyonlardaki % 100 Pamuklu Kumaşlarda Kumaş Kopma Mukavemetinin Regrasyon Analizi ile Tahminlenmesi”, Tekstil ve Konfeksiyon, 2008/3, p.185-190.
- 5. Oğulata, R.T. and Kadem, F.D., “Boyalı İpliklerden Üretilen Farklı Konstrüksiyonlardaki Pamuklu Kumaşlarda Kumaş Yırtılma Mukavemetinin Regrasyon Analizi”, Tekstil ve Konfeksiyon, 2009/2, p.97-101.
- 6. Şekerden, F. and Çelik, N., “Atkı Elastanlı Dokuma ve Kumaş Karakteristikleri”, Tekstil ve Konfeksiyon, 2010/2, p.120-129.
- 7. Yavuzkasap, D., 2010, “Döşemelik Kumaşların Mekanik Özellikleri Üzerine Bir Araştırma”, Dokuz Eylül University Graduate School of Natural and Applied Sciences, MSc Thesis, İzmir, Turkey.
- 8. TS 11818 EN 14465, 2005, Tekstil-Döşemelik Kumaşlar-Özellikler ve Deney Metotları, Turkish Standards Institution, Ankara.
- 9. TS EN ISO 13934-1, 2002, Kumaşların Gerilme Özellikleri- Bölüm 1: En Büyük Kuvvetin ve En Büyük Kuvvet Altında Boyca Uzamanın Tayini- Şerit Metodu, Turkish Standards Institution, Ankara.
- 10. TS EN ISO 13937-3, 2002, Tekstil- Kumaşların Yırtılma Özellikleri- Bölüm 3: Kanat Biçimindeki Deney Numunelerinin Yırtılma Kuvvetinin Tayini- Tek Yırtma Metodu, Turkish Standards Institution, Ankara.