Comparative Analysis of PET, PTT and PBT Yarns Hydrolyzed by Alkali

Alkaline hydrolysis is a useful method for enhancing properties of polyesters. In this study, the alkali hydrolysis of three polyester filament yarns (poly(ethylene terephthalate) (PET), poly(trimethylene terephthalate) (PTT) and poly(butylene terephthalate) (PBT)) was comparatively investigated under various conditions such as alkali concentration, solvent mixture, process duration and temperature. The weight loss under different conditions was evaluated. Scanning electron microscopy was used for morphological evaluation of the samples. Tenacity loss was also determined for hydrolyzed polyester yarns. While the effect of the different contions on weight loss of PET yarns was the highest, that of PBT yarns was the lowest. While PBT yarns lost nearly their half weight at 100 % ethanol, PTT yarns lost almost all of their weight and PET yarns were completely degraded. PBT yarns showed the fewest diameter loss percentages above 30 ºC. PTT yarns showed the highest tenacity loss for the similar weight loss values.

Keywords:

alkali hydrolysis, weight loss, tenacity loss, polyester yarns surface morphology,

PDF

___

1. Arik B, Bozaci E, Demir A, Özdoğan E. 2013. Thermogravimetric, microscopic and mechanical analyses of PBT and PET yarns. Tekstil ve Konfeksiyon, 23(2), 101-106.
2. Kadoğlu H, Dimitrovski K, Marmaralı A, Çelik P, Bayraktar GB, Üte TB., Ertekin G, Demsar A, Kostanjek K. 2016. Investigation of the characteristics of elasticised woven fabric by using PBT filament yarns. AUTEX Research Journal, 16(2), 109-117.
3. İçoğlu Hİ, Oğulata RT. 2017. Effect of ambient parameters on morphology of electrospun poly (trimethylene terephthalate)(PTT) fibers. Tekstil ve Konfeksiyon, 27(3), 215-223.
4. Özkan M, Duru Baykal P, Özkan İ. 2021. Investigation on the performance properties of polytrimethylene terephthalate (PTT) based staple fibers and cotton blended OE-rotor yarns. The Journal of the Textile Institute, 1-11. https://doi.org/10.1080/00405000.2021.1884355.
5. Pyda M, Boller A, Grebowicz J, Chuah H, Lebedev BV, Wunderlich B. 1998. Heat capacity of poly(trimethylene terephthalate). Journal of Polymer Science Part B: Polymer Physics, 36(14), 2499–2511.
6. Donelli I, Freddi G, Nierstrasz VA, Taddei P. 2010. Surface structure and properties of poly-(ethylene terephthalate) hydrolyzed by alkali and cutinase. Polymer Degradation and Stability, 95(9), 1542-1550.
7. Latta BM. 1984. Improved tactile and sorption properties of polyester fabrics through caustic treatment. Textile Research Journal, 54(11), 766-775.
8. Zeronian SH, Collins MJ. 1989. Surface modification of polyester by alkaline treatments. Textile Progress, 2(20), 1–14.
9. Ellison MS, Fisher LD, Alger KW, Zeronian SH. 1982. Physical properties of polyester fibers degraded by aminolysis and by alkaline hydrolysis. Journal of Applied Polymer Science, 27(1), 247-257.
10. Musale RM, Shukla SR. 2017. Weight reduction of polyester fabric using sodium hydroxide solutions with additives cetyltrimethylammonium bromide and [BMIM] Cl. The Journal of the Textile Institute, 108(4), 467-471.
11. Shukla SR, Mathur MR. 2000. Action of alkali on polybutylene terephthalate and polyethylene terephthalate polyesters. Journal of Applied Polymer Science, 75(9), 1097-1102.
12. Holmes SA, Zeronian SH. 1995. Surface area of aqueous sodium hydroxide hydrolyzed high‐speed spun poly (ethylene terephthalate) fibers. Journal of Applied Polymer Science, 55(11), 1573-1581.
13. Dave J, Kumar R, Srivastava HC. 1987. Studies on modification of polyester fabrics I: Alkaline hydrolysis. Journal of Applied Polymer Science, 33(2), 455-477.
14. Tavanai H. 2009. A new look at the modification of polyethylene terephthalate by sodium hydroxide. The Journal of the Textile Institute, 100(7), 633-639.
15. Ng R, Zhang X, Liu N, Yang ST. 2009. Modifications of nonwoven polyethylene terephthalate fibrous matrices via NaOH hydrolysis: Effects on pore size, fiber diameter, cell seeding and proliferation. Process Biochemistry, 44(9), 992-998.
16. Hadjizadeh A, Ajji A, Bureau MN. 2010. Preparation and characterization of NaOH treated micro-fibrous polyethylene terephthalate nonwovens for biomedical application. Journal of the Mechanical Behavior of Biomedical Materials, 3(8), 574-583.
17. Haghighatkish M, Yousefi M. 1992. Alkaline hydrolysis of polyester fibers-structural effects. Iranian Journal of Polymer Science and Technology, 1(2), 56-61.
18. Mazrouei-Sebdani, Z., & Khoddami, A. (2011). Alkaline hydrolysis: A facile method to manufacture superhydrophobic polyester fabric by fluorocarbon coating. Progress in Organic Coatings, 72(4), 638-646.
19. Hashemizad S, Montazer M, Rashidi A. 2012. Influence of the surface hydrolysis on the functionality of poly (ethylene terephthalate) fabric treated with nanotitanium dioxide. Journal of Applied Polymer Science, 125(2), 1176-1184.
20. Wang, Z., Macosko, C. W., & Bates, F. S. (2014). Tuning surface properties of poly (butylene terephthalate) melt blown fibers by alkaline hydrolysis and fluorination. ACS applied materials & interfaces, 6(14), 11640-11648.
21. Kotek R, Jung DW, Kim JH, Smith B, Guzman P, Schmidt B. 2004. Surface hydrolysis of filaments based on poly (trimethylene terephthalate) spun at high spinning speeds. Journal of Applied Polymer Science, 92(3), 1724-1730.
22. Eberl A, Heumann S, Kotek R, Kaufmann F, Mitsche S, Cavaco-Paulo A, Gübitz GM. 2008. Enzymatic hydrolysis of PTT polymers and oligomers. Journal of Biotechnology, 135(1), 45-51.
23. Chen Y, Ding X, Li Y. 2012. Comparison of biostability between poly (trimethylene terephthalate) filaments and PET for vascular prostheses when exposed to hydrolytic and enzymatic degradation. Fibers and Polymers, 13(2), 169-176.
24. Sun SP, Wei M, Olson JR, Shaw MT. 2009. Alkali etching of a poly(lactide) fiber. ACS Applied Materials Interfaces, 1, 1572−1578.
25. Kim ES, Lee CH, Kim SH. 2009. Effects of pretreatment reagents on the hydrolysis and physical properties of PET fabrics. Journal of Applied Polymer Science, 112(5), 3071-3078.

ISSN: 1300-3356
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi

Arşiv