Investigation of the Effects of Elastic Sewing Thread on Seam Performance Properties of Stretch Denim Fabrics

It is seen that stretch denim fabrics manufactured by adding elastane fiber are fashionable and highly preferred by consumers. In this study, comparison of seam performance propeties of elastic and regular polyester sewing threads on stretch denim fabrics was investigated that has not been studied before. As the test material, four denim fabrics were used in twill and satin weave structures and containing 2% elastane with different mixing ratios. Elastane core spun polyester and polyester core spun polyester sewing threads were used in sewing processes. The samples were sewn with lock and chain stitches at the stitch densities of 3 and 4 stitches/cm in both warp and weft directions. The results revealed that the elasticity of the sewing thread has an effect on increasing the seam strength but the strength of the sewing thread is more effective on seam strength and seam efficiency property. Higher seam performance values are obtained in weft directions with chain stitches and at 4 stitches/cm.

___

  • 1. Korkmaz İB. 2009. Physical and visual analysis of jacguard knittings (Master Thesis). University of Halic Social Sciences Institute, İstanbul.
  • 2. Birinci HE. 2009. Producing visual effects on denim (Master Thesis). Marmara University Institute of Fine Arts, İstanbul.
  • 3. Karagöz G. 2009. During the processes of denim finishing resultant damages, reason of damages and help posibility (Master Thesis). Ege Unıversity Graduate School of Natural and Applied Science, İzmir.
  • 4. Acar A. 2005. Suggestions intended to optimizing of denim fabric (Master Thesis). Marmara Unıversity Graduate School of Natural and Applied Science, İstanbul.
  • 5. Behera BK, Chand S, Singh TG, Rathee P. 1997. Sewability of denim. International Journal of Clothing Science and Technology 9(2), 128-140.
  • 6. Yeşilpınar S, Bahar S. 2007. The Effect of Sewing and Washing Processes on the Seam Strength of Denim Trousers. AATCC Review 7(10), 27-31.
  • 7. Korkmaz Y, Çetiner S. 2007. Dikiş mukavemetine etki eden denim kumaş ve dikiş ipliği parametrelerinin araştırılması. Tekstil ve Mühendis 14(65), 24-28.
  • 8. Nayak R, Padhye R, Gon DP. 2010. Sewing performance of stretch denim. Journal of Textile and Apparel, Technology and Management 6(3),1-9.
  • 9. Erdem M, Demirbağ A, Özyazgan V. 2012. İki farklı dikiş ipliğinin denim kumaş üzerindeki mukavemet performanslarının araştırılması. İstanbul Aydın Üniversitesi Dergisi 4(14), 23-46.
  • 10. Zervent Ünal B. 2012. The prediction of seam strength of denim fabrics with mathematical equations. The Journal of The Textile Institute 103(7), 744-751.
  • 11. Ali N, Rehan AM, Ahmed Z, Memon H, Hussain A. 2014. Effect of different types of seam, stitch class and stitch density on seam performance. Journal of Applied and Emerging Sciences 5(1), 32-43.
  • 12. Zervent Ünal B, Duru Baykal P. 2018. Determining the effects of different sewing threads and different washing types on fabric tensile and sewing strength properties. Textile and Apparel 28(1), 34-42.
  • 13. Maarouf MA. 2015. Effect of the seam efficiency and puckering on denim sewability. Journal of Basic and Applied Scientific Research 5(10), 24-32.
  • 14. Doba Kadem F, Bakıcı GG. 2016. Denim kumaşların dikiş performansları üzerine deneysel bir çalışma. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 31(1), 143-148.
  • 15. Malek S, Jaouachi B, Khedher F, Ben Said S, Cheikhrouhou M. 2017. Influence of some sewing parameters upon the sewing efficiency of denim fabrics. The Journal of The Textile Institute 108(12), 2073-2085.
  • 16. Ateş M, Gürarda A, Çeven EK. 2019. Investigation of seam performance of chain stitch and lockstitch used in denim trousers. Tekstil ve Mühendis 26(115), 263-270.
  • 17. ISO 4915:1991. Textiles - Stitch types - Classification and terminology.
  • 18. TS EN ISO 13934-2:2002. Textiles – Tensile properties of fabrics – Part 2: Determination of maximum force using the grab method.
  • 19. TS EN ISO 13935-2:2014. Textiles – Seam tensile properties of fabrics and made-up textile articles – Part 2: Determination of maximum force to seam rupture using the grab method.
  • 20. ASTM D1683-17:2018. Standard test method for failure in sewn seams of woven fabrics.
  • 21. Babaarslan O, Balcı H, Güler Ö. 2007. Effect of elastane on the properties of pes/vis blend woven fabrics. Textile and Apparel 17(2), 110-114.
  • 22. Gürkan Ünal P, Taşkın C. 2007. The effect of weave and densities on tensile strength of 100% polyester fabrics. Textile and Apparel 17(2), 115-118.
  • 23. Kurtça E. 2001. The effect of weft yarn properties, weft density and weave type on mechanical properties of a woven fabric (Master Thesis). Istanbul Technical University Institute of Science and Technology, İstanbul.
  • 24. Karazincir E. 2014. Investigation of seam performance on denim fabrics (Master Thesis). Çukurova University Institute of Natural and Applied Sciences, Adana.
  • 25. Gürarda A. 2008. Investigation of the seam performance of PET/Nylon-elastane woven fabrics. Textile Research Journal 78(1), 21-27.
  • 26. Seetharam G, Nagarajan L. 2014. Evaluation of sewing performance of plain twill and satin fabrics based on seam slippage seam strength and seam efficiency. Journal of Polymer and Textile Engineering 1(3), 9-21.
  • 27. Akter M, Khan MR. The effect of stitch types and sewing thread types on seam strength for cotton apparel. International Journal of Scientific & Engineering Research 6(7), 198-205.
  • 28. Yükseltan E. 2010. Investigation of the effect of lubricant application on sewing threads performance properties and on seam breaking strength (Master Thesis). Uludağ University Graduate School of Natural and Applied Sciences, Bursa.
  • 29. Sülar V, Meşegül C, Kefsiz H, Seki Y. 2015. A comparative study on seam performance of cotton and poliester woven fabrics. The Journal of The Textile Institute 106(1), 19-30.
  • 30. Çitoğlu F, Kaya G. 2011. The effects of sewing thread properties and stitch densities on seam strength at different seam angles. Textile and Apparel 21(2), 182-188.
  • 31. Sarhan TMA. 2013. Interaction between sewing thread size and stitch density and its effects on the seam quality of wool fabric. Journal of Applied Sciences Research 9(8), 4548-4557.
  • 32. Frydrych I, Greszta A. 2016. Analysis of lockstitch seam strength and its efficiency. International Journal of Clothing Science and Technology 28(4) 480-491.
  • 33. Nassif NAA. 2013. Investigation of the effects of sewing machine parameters on the seam quality. Life Science Journal 10(2), 1427-1435.