Artık Co-Cr Alaşım Kullanımının Döküm Restorasyonlarının Korozyon Dirençleri Üzerine Etkisi
Amaç: Bu çalışmanın amacı Co-Cr alaşımlarının kayıp mum tekniği ile dökümünde, %50 artık alaşım (çupa) ilave edilmesi veya dökümde tamamen artık alaşımın kullanılması ile elde edilen örneklerin korozyon direncini değerlendirmekti. Materyal-Metot: Dört farklı ticari Co-Cr alaşımından; %100 yeni (I. Grup), %50 yeni+% 50 artık (II. Grup) ve %100 artık (III. Grup) formu kullanılarak kayıp mum döküm yöntemi ile disk (5 mm çapta, 3 mm kalınlıkta) şeklinde 60 adet örnek hazırlandı. Elektrokimyasal testler, 25 ml Fusayama-Meyer yapay tükürük solüsyonu içerisinde, üç hücreli düzenekte yapıldı. Elektrolizden sonra, örneklerin polisajlı düz yüzeylerinden, elektrokimyasal empedans spektroskopi (EES) ölçümü yapılarak R ohm değerleri belirlendi. Daha sonra örneklere -1,2 V’tan başlayarak +1,6 V’a kadar 2 mVs-1 tarama hızında potansiyel uygulandı. Örnek yüzeylerinden salınan iyon miktarı indüktif eşleşmiş plazma kütle spektrometresi (ICP-MS) kullanılarak ppm olarak belirlendi. Bulgular istatistiksel olarak analiz edildi. Herbir gruptan yüzeyi asitlenen örneklerin taramalı elektron mikroskobu (SEM) görüntüleri incelendi. Bulgular: Salınan iyon miktarı bakımından I. ve III. örnek grupları arasındaki farklar istatistiksel olarak önemli bulundu (P<0,01). Örneklerin I., II. ve III. grup R ohm değerlerinin I. gruptan III. gruba doğru azaldığı görüldü. Ancak döküm örneklerinin ortalamaları arasındaki farklar istatistiksel olarak önemli bulunmadı ( P=0,325). SEM görüntülerine göre I. ve II. gruplar arasında belirgin farklılık görülmezken, III. grup örneklerin yüzeylerinde homojen örgü yapısının değişmeye başladığı belirlendi. Sonuç: Bu çalışmaya göre; Co-Cr alaşım örneklerine %50 artık alaşım ilave edilmesi, örneklerin korozyon direncini önemli miktarda değiştirmemiştir. Ancak örneklerin, tamamen artık alaşımdan hazırlanması, korozyon direncini düşürmüştür. Bu nedenle, yeni alaşım ilavesi yapılmaksızın, önceden eritilmiş Co-Cr artık alaşımının tekrar dökülerek kullanılması tavsiye edilmez.
___
- 1. Wataha JC. Alloys for prosthodontic restorations. J Prosthet Dent 2002; 87(4):351-63.
- 2. Schmalz G, Langer H, Schweikl H. Cytotoxicity of dental alloy extracts and corresponding metal salt solutions. J Dent Res 1998; 77(10): 1772-8.
- 3. Wataha JC. Biocompatibility of dental casting alloys: a review. J Prosthet Dent 2000; 83(2): 223-34.
- 4. Schmalz G, Garhammer P. Biological interactions of dental cast alloys with oral tissues. Dent Mater 2002; 18(5): 396-406.
- 5. Shettlemore MG, Bundy KJ. Assessment of dental material degradation product toxicity using a bioluminescent bacterial assay. Dent Mater 2002; 18(6): 445-53. 6. Imirzalioglu P, Alaaddinoglu E, Yilmaz Z, Oduncuoglu B, Yilmaz B, Rosenstiel S. Influence of recasting different types of dental alloys on gingival fibroblast cytotoxicity. J Prosthet Dent 2012; 107(1): 24-33.
- 7. Sarkar NK, Fuys RA Jr, Stanford JW. The chloride corrosion behavior of silver-base casting alloys. J Dent Res 1979; 58(6): 1572-7.
- 8. Tuna SH, Pekmez NO, Keyf F, Canli F. The electrochemical properties of four dental casting suprastructure alloys coupled with titanium implants. J Appl Oral Sci 2009; 17(5): 467-75.
- 9. Shillingburg HT, Hobo S, Whitsett LD, Brackett SE. Fundamentals of fixed prosthodontics. 3rd ed. Chicago, Quintessence, 1997; 365-83.
- 10. Kansu G, Aydin AK. Evaluation of the biocompatibility of various dental alloys: Part 2--Allergenical potentials. Eur J Prosthodont Restor Dent 1996; 4(4): 155-61.
- 11. Slokar Lj, Matkoviç T, Matkoviv P. Microstructure and hardness of Co-Cr-Ti alloys for dental casting. Metalurgija 2004; 43(4): 273-7.
- 12. Donovan TE, White LE. Evaluation of an improved centrifugal casting machine. J Prosthet Dent 1985; 53(5): 609-12.
- 13. Vaillant-Corroy AS, Corne P, De March P, Fleutot S, Cleymand F. Influence of recasting on the quality of dental alloys: A systematic review. J Prosthet Dent 2015; 114(2): 205-11.
- 14. Lewis AJ. Metallographic changes and phase identification in a nickel base alloy upon fusion and casting. Aust Dent J 1975; 20(6): 378-83.
- 15. Peraire M, Martinez-Gomis J, Anglada JM, Bizar J, Salsench J, Gil FJ. Effects of recasting on the chemical composition, microstructure, microhardness, and ion release of 3 dental casting alloys and titanium. Int J Prosthodont 2007; 20(3): 286-8.
- 16. Al-Hiyasat AS, Darmani H. The effects of recasting on the cytotoxicity of base metal alloys. J Prosthet Dent 2005; 93(2): 158-63.
- 17. Ozdemir S, Arikan A. Effects of recasting on the amount of corrosion products released from two Ni-Cr base metal alloys. Eur J Prosthodont Restor Dent 1998; 6(4): 149-53.
- 18. Cortada M, Giner L, Costa S, Gil FJ, Rodríguez D, Planell JA. Galvanic corrosion behavior of titanium implants coupled to dental alloys. J Mater Sci Mater Med 2000; 11(5): 287-93.
- 19. Tuna SH, Pekmez NO, Keyf F, Canli F. The influence of the pure metal components of four different casting alloys on the electrochemical properties of the alloys. Dent Mater 2009; 25(9): 1096-103.
- 20. Asgar K. Casting metals in dentistry: past--present--future. Adv Dent Res 1988; 2(1): 33-43.
- 21. López-Alías JF, Martinez-Gomis J, Anglada JM, Peraire M. Ion release from dental casting alloys as assessed by a continuous flow system: Nutritional and toxicological implications. Dent Mater 2006; 22(9): 832-7.
- 22. Viennot S, Dalard F, Lissac M, Grosgogeat B. Corrosion resistance of cobalt-chromium and palladium-silver alloys used in fixed prosthetic restorations. Eur J Oral Sci 2005; 113(1): 90-5.
- 23. Reclaru L, Lüthy H, Eschler PY, Blatter A, Susz C. Corrosion behaviour of cobalt-chromium dental alloys doped with precious metals. Biomater 2005; 26(21): 4358-65.
- 24. Mareci D, Nemtoi G, Aelenei N, Bocanu C. The electrochemical behaviour of various non-precious Ni and Co based alloys in artificial saliva. Eur Cell Mater 2005; 10: 1-7.
- 25. Tuna SH, Özçiçek Pekmez N, Kürkçüoğlu I. Corrosion resistance assessment of Co-Cr alloy frameworks fabricated by CAD/CAM milling, laser sintering, and casting methods. J Prosthet Dent 2015; 114(5): 725-34.
- 26. ISO 10271 Dental metallic materials-corrosion testing methods. 1 th. Ed. 2001.
- 27. Akyalçın Ş, Aladağ L. İki baz metal alaşımından iyon salımını eritme yöntemlerinin ve artık metal kullanımının etkisi. Hacettepe Diş Hek Fak Derg 2004; 28: 35-40.
- 28. Örtorp A, Jönsson D, Mouhsen A, Vult von Steyern P. The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study. Dent Mater 2011; 27(4): 356-63.
- 29. Castillo-Oyagüe R, Lynch CD, Turrión AS, López-Lozano JF, Torres-Lagares D, Suárez-García MJ. Misfit and microleakage of implant-supported crown copings obtained by laser sintering and casting techniques, luted with glass-ionomer, resin cements and acrylic/urethane-based agents. J Dent 2013; 41(1): 90-6.
- 30. Viennot S, Lissac M, Malquarti G, Dalard F, Grosgogeat B. Influence of casting procedures on the corrosion resistance of clinical dental alloys containing palladium. Acta Biomater 2006; 2(3): 321-30. 31. Harcourt H. Remelting of cobalt-chromium alloys. Br Dent J 1962: 198-204.
- 32. Reisbick MH, Brantley WA. Mechanical property and microstructural variations for recast low-gold alloy. Int J Prosthodont 1995; 8(4): 346-50.
- 33. Anusavice KJ. Phillips science of dental materials. 11th ed. St Louis: Elsevier; 2003.
- 34. Ayad MF. Compositional stability and marginal accuracy of complete cast crowns made with as-received and recast type III gold alloy. J Prosthet Dent 2002; 87(2): 162-6.
- 35. Ayad MF, Ayad GM. Corrosion behavior of as-received and previously cast type III gold alloy. J Prosthodont 2010; 19(3): 194-9.
- 36. Bauer J, Cella S, Pinto MM, Costa JF, Reis A, Loguercio AD. The use of recycled metal in dentistry: evaluation of mechanical properties of titanium waste recasting. Resour Conserv Recycl 2010; 54: 1312-6. 37. Bajoghli F, Nosouhian S, Badrian H, Goroohi H, Saberian A, Gadesi L. Effect of base metal alloys recasting on marginal integrity of castable crowns. J Contemp Dent Pract 2013; 14(2): 255-8.
- 38. Khamis E, Seddik M. Corrosion evaluation of recasting non-precious dental alloys. Int Dent J 1995; 45(3): 209-17.
- 39. Kurtulmuş S, Aydın K. Tekrarlanan döküm işleminin dental alaşımların mekanik özelliklerine etkisi. Cumhuriyet Üniv Diş Hek Fak Derg 2008; 11(2): 126-33.
- 40. Atluri KR, Vallabhaneni TT, Tadi DP, Vadapalli SB, Tripuraneni SC, Averneni P. Comparative Evaluation of Metal-ceramic Bond Strengths of Nickel Chromium and Cobalt Chromium Alloys on Repeated Castings: An In vitro Study. J Int Oral Health 2014; 6(5): 99-103.
- 41. Henriques GE, Consani S, Rollo JM, Andrade e Silva F. Soldering and remelting influence on fatigue strength of cobalt-chromium alloys. J Prosthet Dent. 1997; 78(2): 146-52.
- 42. Galo R, Ribeiro RF, Rodrigues RC, Rocha LA, de Mattos Mda G. Effects of chemical composition on the corrosion of dental alloys. Braz Dent J 2012; 23(2): 141-8.
- 43. Frankel GS. Electrochemical techniques in corrosion: status, limitations, and needs. J ASTM Int 2008; 5: 1-27.
- 44. Xin XZ, Chen J, Xiang N, Gong Y, Wei B. Surface characteristics and corrosion properties of selective laser melted Co-Cr dental alloy after porcelain firing. Dent Mater 2014; 30(3): 263-70.
- 45. Horasawa N, Marek M. The effect of recasting on corrosion of a silver-palladium alloy. Dent Mater 2004; 20(4): 352-7.
- 46. Brune D. Mechanisms and kinetics of metal release from dental alloys. Int Endod J 1988; 21(2): 135-42. 47. Schedle A, Samorapoompichit P, Rausch-Fan XH, Franz A, Füreder W, Sperr WR, Sperr W, Ellinger A, Slavicek R, Boltz-Nitulescu G, Valent P. Response of L-929 fibroblasts, human gingival fibroblasts, and human tissue mast cells to various metal cations. J Dent Res 1995; 74(8): 1513-20.
- 48. Hesby DA, Kobes P, Garver DG, Pelleu GB Jr. Physical properties of a repeatedly used nonprecious metal alloy. J Prosthet Dent 1980; 44(3): 291-3.
- 49. Imran M, Raza M, Khan MS, Hayat Y. Effect of cobalt-cromium alloy re-used in dentistry on its castability value. J Ayyub Med Abbottabad 2017; 29(2): 270-4.