Arife GENCER IMER, Ahmet TOMBAK, Abdulkadir KORKUT

Effect of Illumination on the Photovoltaic Parameters of Al/p-Si Diode with an Organic Interlayer Prepared by Spin Coating Method

In this study, the photovoltaic device application of bromothymol blue (BTB) as an organic interlayer has been reported. After Al back contact fabrication on the surface of the chemically cleaned substrate by thermal evaporation method, the organic interlayer has been grown on p-Si substrate via spin coating technique. Al top contacts have been formed on this organic thin film to finalize the device constructions. The different illumination intensities were exposed to the prepared sample for the enhancement in the photovoltaic properties of device. The fundamental photovoltaic parameters such as open circuit voltage (Voc), short circuit current (Isc) and output power (P) were determined for the device under different illuminations. The photocurrent and the photo voltage have been increased with the increasing in illumination intensity. The dependence of the capacitance on the voltage at high and low frequency has been also reported for the studied device. Consequently, it has been confirmed that the illumination intensity has an important influence on the photovoltaic parameters of the device.

Anahtar Kelimeler:

Illumination, Organic interlayer; Photovoltaic; Capacitance

PDF

___

[1] Gencer Imer, A., Ocak, Y. S. 2016. Effect of light intensity and temperature on the current voltage characteristic of Al/SY/p-Si organic-inorganıc heterojunction. Journal of Electronic Materials 45(2016) 5347-5355
[2] Gencer Imer, A., Tombak, A., Korkut, A. 2016. Electrical and photoelectrical characteristic investigation of new generation photodiode based on bromothymol blue dye. Journal of Physics: Conference Series, 707(2016), 012012.
[3] Tombak, A., Ocak, Y. S., Asubay, S., Kilicoglu, T. Ozkahraman, F. 2014. Fabrication and electrical properties of an organic–inorganic device based on Coumarin 30 dye. Mater. Sci. Semi. Proc. 24(2014) 187-192.
[4] Farag, A. A. M., Mansour, A. M., Ammar, A. H., Abdel Rafea, M. 2011. Characterization of electrical and optical absorption of organic based methyl orange for photovoltaic application. Synthetic Metals, 161(2011), 2135-2143
[5] Yakuphanoglu, F., Ocak, Y. S., Kılıcoglu, T., Farooq, W.A. 2011. Interface control and photovoltaic properties of n-type silicon/metal junction by organic dye. Microelectron. Eng. 88(2011), 2951-2954.
[6] Phan, D. T., Gupta, R. K., Chung, G. S., Al-Ghamdi, A. A., Al-Hartomy, O. A., El-Tantawy, F., Yakuphanoglu. 2012. Photodiodes based on graphene oxide–silicon junctions. Solar Energy, 86(2012), 2961-2966.
[7] Ugur, A., Gencer Imer, A., Ocak, Y. S. 2015. Electrical and photoelectrical characterization of an organic–inorganic heterojunction based on quinoline yellow dye. Mater. Sci. Semic. Proc., 39(2014), 569-574.
[8] Tascıoglu, I., Farooq, W. A., Turan, R., Altındal, S., Yakuphanoglu, F. 2014. Charge transport mechanisms and density of interface traps in MnZnO/p-Si diodes. J. Alloy Compd., 590(2014) 157–161.
[9] Soylu, M., Al-Hartomy, O. A, Al-Said, S. A. F., Al-Ghamdi, A. A., Yahia, I.S., Yakuphanoglu, F. 2013. Controlling of conduction mechanism and electronic parameters of silicon-metal junction by mixed methylene blue/2’-7’-diclorofluorescein. Microelectronics Reliability, 53(2013), 1901-1906.
[10] Gencer Imer, A., Temirci, C., Gulcan, M., Sonmez, M. 2014. Electrical characteristics of organic/inorganic Pt (II) complex/p-Si semiconductor contacts. Mater. Sci. Semic. Proc., 28(2014), 31-36.
[11] Aydoğan, Ş., Güllü, O. 2010. A study of the rectifier behavior of aniline green based Schottky diode. Microelectronic Engineering, 87(2010), 187-191.
[12] Bilkan, Ç., Zeyrek, S., San, S.E., Alındal, Ş. 2015. A compare of electrical characteristics in Al/p-Si (MS) and Al/C20H12/p-Si (MPS) type diodes using current–voltage (I–V) and capacitance–voltage (C–V) measurements. Mater. Sci. Semi. Proc. 32(2015) 137-144.
[13] Çaldıran, Z., Deniz, A. R., Coşkun, M.F., Aydoğan, Ş., Yeşildağ, A. Ekinci, D. 2014. I–V–T (current–voltage–temperature) characteristics of the Au/Anthraquinone/p-Si/Al junction device. Journal of Alloys and Compounds, 584(2014), 652-657
[14] Yahia, I. S., Shakra, A. M., Fadel, M., Hafez, H. S., Micheal, M. M., Yakuphanoglu, F. 2014. Photovoltaic response of dye-sensitized solar cell using 2′,7′-dichlorofluorescein as an organic dye Mater. Sci. Semi. Proc. 28 (2014) 77-83.
[15] Kazim, S., Ali, V., Zulfequar, M., Hak, M. M., Husain, M. 2013. Electrical transport properties of poly[2-methoxy-5-(2′-ethyl hexyloxy)-1,4-phenylene vinylene] thin films doped with acridine orange dye. Physica B, 393(2013), 310-315.
[16] Soylu, M., Cavas, M., Al-Ghamdi, A. A., Gafer, Z. H., El-Tantawy, F., Yakuphanoglu, F. 2014. Photoelectrical characterization of a new generation diode having GaFeO3 interlayer. Sol. Ener. Mater. Sol. Cells 124(2014) 180-185.
[17] Tecimer, H., Türüt, A., Uslu, A., Uslu, I. 2013. Temperature dependent current-transport mechanism in Au/(Zn-doped)PVA/n-GaAs Schottky barrier diodes. Sens. Actuators A 199(2013), 194-201.
[18] Gullu, O., Kilicoglu, T., Türüt, A. 2010. Electronic properties of the metal/organic interlayer/ inorganic semiconductor sandwich device. J. Phys. Chem. Solids, 71(2010) 351–356.
[19] Kılıçoglu, T., Tombak, A., Ocak, Y.S., Aydemir, M. 2014. Electrical and photoelectrical characterization of a TTF/p-InP organic–inorganic heterojunction. Microelectron. Eng., 129(2014), 91-95.
[20] Vural, O., Safak, Y., Turut, A., Altındal, A. 2012. Temperature dependent negative capacitance behavior of Al/rhodamine-101/n-GaAs Schotthy barrier diodes and Rs effects on C-V and G/w-V characteristics. J. Alloys Compd., 513(2012) 107-111.