Bir dövme prosesinde darboğazın tespiti ve giderilmesine doğrusal programlama yaklaşımı

Bu çalışmada, kesikli seri üretiminin yapıldığı bir dövme üretim prosesinde darboğazın tespiti ve çözüm yöntemleri araştırılmıştır. Öncelikle prosesin mevcut kapasitesi, ürünlerin imalat aşamalarındaki işlem zamanları ve planlama dönemi boyunca tüm ürün talepleri bilindiğinden doğrusal programlama metodu yardımıyla darboğazın bulunduğu proses elemanı tespit edilmeye çalışılmıştır. İşletmenin genel amaçları doğrultusunda çözümler geliştirilmiş, alternatifler ortaya konmuştur. Varılan sonuçlar gerek amaca uygunluk gerekse mali açıdan ele alınarak uygun alternatifler önerilmiştir.

The linear programming approach to the bottleneck and solutions in the forging production process

In this paper, in the interrupted forging production processes, bottleneck, and solutions were investigated. Previously current capacity of process, each processes time of product and all orders during the planning period were know so that processes equipment which is reason of bottleneck was determined by solutions using of linear programming method and alternative ways were developed which are suitable for policy of firm. As a results of this study, suitable alternative way was presented for economical utilisation of resource and also with regard to policy of firm.

___

Erlenkotter, D., 1977, Capacity Expansion with Imports and Inventories, "Management Science", vol:23, No:7, pp:694- 702.
Rao, M. R., 1976, Optimal Capacity Expansion with Inventory, "Operations Research", Vol:24, No:2, pp: 291-300.
Ong, S.L., Adams, B.J., 1989, The Effect of Discretizing the Planning Period on the Optimal Cost of Capacity Expansion Systems, ""European Journal of Operational Research", Vol:43, pp: 292-304.
Wijngaard, J., 1989, Timing and Lot-Sizing in Production Control, ''Journal Manufacturing Operating Management", Vol:2,pp: 35-51.
Hunt, Ğ.C., 1956, Sequential Arrays of Waiting Line, "Operations Research", Vol: 4, pp:674-683. Suziki, T., 1964, On a Tandem Queue with Blocking, "Journal Operations Research Society Japan", Vol:6, pp:137-157.
Av-Itzhak, B. and Yadin, M., 1965, A Sequence of Two Servers with no Intermediate Queue, "Management Science", Vol: 11, pp: 553-564.
Morse, P.M., 1965, Queues, Inventories and Maintenance, John Wiley & Sons, New York.
Buzacott, J.A., 1968, Prediction of the Efficiency of Production Systems without Internal Storage, "International Journal of Production Research", v 01:6, pp 173-1 88.
Rao, N. P., 1975, On the Mean Production Rate of Two Stage Production system of the Tandem Type, "International Journal of Production Research", Vol: 13, pp:207-217.
Shantkumar, J. G., 1980, On the Production Capacity of Automatic Transfer Lines with Unlimited Buffer Space, "AIIE Transactions", Vol:12, pp: 273.
Pourbabaı, B., 1993, Operating a Flexible Assembly Line: To Control the Bottleneck, "European Journal of Operational Research", Vol:71, pp: 353-365.
Grosfeld A. and Nir, A., 1995, Single Bottleneck Systems with Proportional Expected Yields and Rigid Demands, "European Journal of Operational Research", Vol:80, pp: 297-307.
Dar-El, E.M., Herer,, Y.T. and Masin, M., 1999, CONWIP-Based production Lines with multiple bottlenecks: performance and design implications, "IIE Transactions", Vol:31 (2), pp: 99-111.