19718

Sürtünme kaynağıyla birleştirilmiş AISI 1040/Dublex paslanmaz çelik çiftinde sürtünme süresinin mikroyapı ve mekanik özelliklerine etkisi

In this study, the effect on the characteristic microstructure and mechanic properties of friction time on the couple steels AISI 1040/AISI 2205 stainless steel joining with friction welding method was experimentally investigated. Friction welding experiment were carried out in privately prepared PLC controlled continuous friction welding machine by us. Joints were carried out under 1700 rpm rotation speed, with 30MPa process friction pressure, 60MPa forging pressure, 4 second forging pressure and under 3, 5, 7, 9 and 11 second friction time, respectively. After friction welding, the bonding interface microstructures of the specimens were examined by SEM microscopy and EDS analysis. After weld microhardness and tensile strength of specimens were carried out. The result of applied tests and observations pointed out that the properties of microstructure were changed with friction time increased. The excellent tensile strength of joint observed on 1700 rpm rotation speed and 3 second friction time sample.

Anahtar Kelimeler:

Sürtünme kaynağı, AISI 1040 çelik, Dublex paslanmaz çelik, Sürtünme Süresi

Effect of friction time on the microstructure and mechanic properties of friction welded AISI 1040/Duplex stainless steel

Keywords:

Friction Welding, AISI 1040, Duplex Stainless Steel, Friction Time,

PDF

___

[1] Özdemir, N., “Tane küçültülmüş düşük alaşımlı yüksek karbonlu çeliklerin sürtünme kaynağını birleştirilebilirliğinin araştırılması” Fırat Üniversitesi Fen Bilimleri Enstitüsü Doktora Tezi, Elazığ. 2002.
[2] Dinç, D., “AISI 1040 ve AISI 304 çeliklerinin sürtünme kaynak yöntemiyle kaynak edilebilirliğinin araştırılması”, Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Y. Lisans Tezi, Balıkesir, 2006.
[3] Sahin M.ve Erol Akata H., ‘’ Joining with friction welding of plastically deformed steel’’, Journal of Materials Processing Technology, 142, 239–246, 2003.
[4] ASM Handbook.. “Failur analysis and prevention”, U.S.A., (11), 1992.
[5] Jenning, P., “Some properties of dissimilar metal joint made by frictionwelding”, The Welding Institue, Abinhton Hall, Cambridge, 141–153, 1971.
[6] Tylecote, R.Y., “The solid phase welding of metals”, Edward Arnold Ltd., London, (1), 50, 1968.
[7] Sereıgın, S.A, Sabantsev, V.P., “The friction welding of quenched steel”, Weld. Prod., 20- 23, 1977.
[8] Özdemir, N.,‘’Investigation of the mechanical properties of friction-welded joints between AISI304L/AISI4340steel as a function rotational speed’’ Material letters, 59, 2504- 2509, 2005.
[9] Ünal E., Sürtünme kaynağı ile birleştirilmiş AISI4340 çeliği ile paslanmaz çeliklerin yorulma dayanımının araştırılması, Fırat Üniversitesi Fen Bilimleri Enstitüsü Yüksek Lisans Tezi, Elazığ, 2003.
[10] Noble D. N., Selection of wrought duplex stainless steels, ASM Metals Handbook, V:6, 471-479, 1993.
[11] Ozdemir N., “Investigation of the mechanical properties of friction welded joints between AISI 304L and 4340 steel as a fontion rotional speed”, Materials letters; 59: 2504-2509, 2005.