Pulse plazma yöntemi modifiye edilmiş sıcak iş takım çeliklerinin yüzey özellikleri
Pulse plazma prosesi bir modifikasyon yöntemidir. Bu çalışmada; sıcak iş takım olan W360 ISOBLOC çeliğinin yüzeyleri pulse plazma sistemi ile modifiye edilmiş ve bu yüzeylerin mekaniksel ve mikroyapısal özellikleri araştırılmıştır. Deneysel çalışmalarda üç farklı nozul mesafesi (30mm, 40mm, 50mm) ve pulse sayısı (15, 10, 5) kullanılmıştır. Modifiye edilen numunelerin optik mikroyapı fotoğrafları çekilmiş ve modifikasyon tabaka kalınlıkları ölçülmüştür. Pulse plazma prosesinin uygulandığı parametrelerin değişiminin modifikasyon tabaka kalınlığını ve yapısını etkilediği belirlenmiştir. Modifikasyon tabakasından alınan x-ışını analizlerinde FeN, Fe2N, - Fe piklerine rastlanmıştır. Çelik yüzeylerine SEM ve EDS analizleri uygulanmıştır. Mikrosertlik ölçümlerinde mesafeye ve pulse plazma parametrelerine göre değişen sertlik değerleri elde edilmiştir. Modifikasyon işlemi uygulanmadan çeliğin sertlik değeri 4-6 kat artmıştır.
The surface properties of hot work steel modificated with pulse plasma treatment
In this study, the surface properties of a W360 ISOBLOC as hot work steel was investigated in respect to mechanical and microstructural aspects. Three were three different sample-plasma gun nozzle distances (30, 40 and 50 mm) and three different pulse number (5,10 and 15) were chosen for the surface modification at a constant battery capacity of 800 mf. After pulse plasma surface treatment, the modified surface layers were examined using an optical microscope. The SEM and EDS analyses were applied to surface on samples. It was observed that surface treatment affects the formation of a new structure. XRD analyses was done. The new phases were formed such as FeN, Fe2N, - Fe, W3O which is located in the modification layer. The samples were also subjected to micro-hardness measurements. It was found that the hardness values of modified surfaces are 4-6 times higher than that of the untreated samples.
___
- Quercia,G.,Grigorescu, I., Contreras, H., Di
Rauso, C., Gutierrez-Campos, D., “Friction
And Wear Behaviour Of Several Hard
Materials”, PP. 359-369, 2001
- Kessler, O.H., Hoffmann, F.T., Mayr, P.,
“Combinations Of Coating And Heat Treating
Processes: Establishing A System For
Combined Processes And Examples”, Surface
And Coatings Technology, Vol.108–109,
Pp.211–216, 1998,
- Kwok, C.T., Lk, H., Cheng, F.T., Man, H.C.,
“Effect Of Processing Conditions On The
Corrosion Performance Of Laser SurfaceMelted
Aısı 440c Martensitic Stainless Steel”,
Surface And Coatings Technology, Vol.166,
Pp.221–230, 2003
- Tyurın, N., Kolısnıchehk, O.V, Ve Tsygankov,
N.G., “Pulse Plasma Hardening Of Tolls”, The
Paton Welding Journal, Vol.1, Pp. 38-43, 2001
- Zdunek, K., Baszkıewıcz, J., Boldok, Z.,
Jelenkowskı, J., Psoda, M., Smolık, J., “Dublex
Antiabrasive Coating Produced By Impulse
Plama Deposition”, Surface And Coatings
Tech., Vol. 98, Pp.1444-1447, 1998
- Yaralı, Y., “Pulse Plazma Teknolojisi İle
Çeliklerde Yüzey Modifikasyonları” Sakarya
Üniversitesi Fen Bilimleri Ens.,Yüksek Lisans
Tezi, 2003
- Uglov,V.V.,Anıshchik,V.M.,Stashynskı, V.V.,
Sveshnıkov, Y.V., Rumiancev, I.N.,
Kostyukevich, E.A., “Structure And Phase
Transformation Of Iron Surface Layer Treated
By Compression Nitrogen Plasma Flows”,
Surface And Coatings Technology,Vol.180 –
181, Pp.633–636, 2004
- Proskurovsky, D.I, Rotshteın,V.P, Ozur, G.E.
Ivanov Yu.F., Markov, A.B., “Physical
Foundations For Surface Treatment Of
Materials With Low Energy, High Current
Electron Beams”, Surface And Coatings
Technology, Vol.125, Pp.49–56, 2000
- Uglov, V.V., Anıshchik, V.M., Astashynskı,
V.V., Sveshnıkov, Y.V., Rumiancev, I.N.,
Kostyukevich, E.A., “Structure And Phase
Transformation Of Iron Surface Layer Treated
By Compression Nitrogen Plasma Flows”,
Surface And Coatings Technology, L.180 –
181, Pp.633–636, 2004
- Langner, J., Piekoszewski, J., Werner, Z.,
Tereshin, V.I., Chebotarev, V.V., Garkusha, I.,
Wali, L., Sartowska, B., Starosta, W.,
Szymczyk, W., Kopcewicz, M., Grabias, A.,
“Surface Modification Of Constructional Steels
By Irradiation With High Intensity Pulsed
Nitrogen Plasma Beams”, Surface And
Coatings Technology, Vol. 128-129, Pp.105-
111, 2008
- Podgornik, B., Vizintin, J., “Wear Resistance
Of Pulse Plasma Nitrided Aısı 4140 And A355 Steels”, Materials Science And Engineering ,
Vol. A315, Pp.28–34, 2001
- Y.Y. Ozbek, C. Sarioglu, M.Durman, 2014,
“Surface Properties Of M2 Steel Treated By
Pulse Plasma Technique”, Vacuum,Vol.106,
2015