İnsan Bacak Hareketleri İçin Prototip Dış İskelet Robotik Sisteminin Mekanik Tasarımı Ve Hareket Verilerinin Yapay Sinir Ağları İle Elde Edilmesi

Target of this study is designing a exoskeleton system for single lower extremity disabled person and controlling this exoskeleton system with neural network. Exoskeleton system is modeled by using SolidWorks. At the same time, gait data is acquired on human body and sole is divided four parts after that reaction forces are gauged during the walking. Distributions of strain and deformation are obtained by using experimental gait data. The walking is designed using the obtained data and walking data is derived for control stage. Power requirements of actuators are defined.

Mechanical Design Of Prototype Exoskeleton Robotic System For Human Leg Movements And Implementation Of Gait Data With Neural Network

-

___

  • K. Nagasaka, H. Inoue, and M. Inaba, “Dynamic Walking Pattern Generation for a Humanoid Robot Based on Optimal Gradient Method” Proceedings of the 1999 IEEE International Conference on Systems, Man & Cybernetics, 6, 1999, pp. 908-913.
  • S. Hong, Y. Oh, B. You, and S. Oh, “A walking pattern generation method of humanoid robot MAHRU-R” Intelligent Service Robotics Journal, 2(3), 2009, pp. 161-171.
  • Q. Huang, K. Yokoi, S. Kajita, K. Kaneko, H. Arai, N. Koyachi, et al., “Planning walking patterns for a biped robot” IEEE Transactions on Robotics and Automation, 17 (3), 2001, pp. 280-289.
  • M. A. Townsend and R. J. Lepofsky, “Powered walking machine prosthesis for paraplegics”, Med. Biol. Eng. 14, 1976, pp. 436–444.
  • M. Vukobratovic, “Humanoid robotics — Past, present state, future” Int. J. Human. Robot., 2007.
  • D. Ito, T. Murakami, and K. Ohnishi, “An approach to generation of smooth walking pattern for biped robot” Proceedings of the 7th Workshop on Advance Motion Control Malibor, Slovenia, 2002, pp. 98-103.
  • D. Cai, P. Bidaud, V. Hayward, F. Gosselin ''Design On Self-Adjusting Orthoses For Rehabilitation'' Proceedings of the 14th 1ASTED International Conference Robotics And Applications (RA 2009), November 2-4, 2009, Cambridge, MA, USA.
  • K. H. Low, X. Liu , H. Yu ''Development of NTU Wearable Exoskeleton System for Assistive Technologies'' Proceeding of te IEEE International Canference on Mechatronics & Automation, Niagara Falls, Canada - July 2005
  • http://www.pandocare.com/products.html#kneeanklefoot
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi-Cover
  • ISSN: 1301-4048
  • Yayın Aralığı: Yılda 6 Sayı
  • Başlangıç: 1997
  • Yayıncı: Sakarya Üniversitesi Fen Bilimleri Enstitüsü
Sayıdaki Diğer Makaleler

Yayılı Yükleme Etkisindeki Üç Boyutlu İnsan Kalça Ekleminin Sonlu Elemanlar Yöntemiyle İncelenmesi

Mehmet Emin Çetin, Hasan Sofuoğlu

Beyin Dalgası Kontrollü Protez Kol Tasarımı

Erol UYAR, Kadir ŞENLİ, Lütfi MUTLU

KARACİĞER DOKUSUNUN SAKLAMA ZAMANINA VE SOLÜSYONUNA BAĞLI MATERYAL ÖZELLİKLERİNİN DEĞİŞİMİ

Mehmet AYYİLDİZ, Berkay YARPUZLU, Cagatay BASDOGAN

Adolesan İdiopatik Skolyozlularda Statik ve Dinamik Ağırlık Aktarma Becerisinin Araştırılması

Gözde GÜR, Songül AKSOY, Yavuz YAKUT

Radius Kırıklarında Plak Fiksasyonu Ve İntramedüller Çivileme Yöntemlerinin Teorik Olarak İncelenmesi

Halim KOVACI, Hojjat Ghahramanzadeh Asl, İrfan Kaymaz, Akgün ALSARAN, Ayhan ÇELİK, Gürsel SAKA

Sternum Kapama Yöntemleri

Süleyman Nazif Orhan, Mehmet H. Özyazıcıoğlu

Hastane Malzemelerinin Sağlık Çalışanlarının Postürüne Etkileri

Erkan ALP, Mehmet BOZKURT, İbrahim BAŞÇİFTÇİ

Dinamik Ayaklı Diz Altı Protezi Kullanan Amputelerde Yürüyüş Simetrisinin İncelenmesi

Yasin YURT, Gül ŞENER, Özlem ÜLGER, Semra TOPUZ, Kezban BAYRAMLAR, Fatih ERBAHÇECİ

Engellilere Yönelik Bir Mobilite Destek Sistemi Tasarımı İçin Doğrulma Hareketinin Biyomekanik Analizi

Ufuk DOĞAN, Ahmet AĞAOĞLU, Koray K. ŞAFAK

Sağlam kuzu omurgası ile endoskopik diskektomi yapılmış kuzu omurgasının biyomekanik olarak karşılaştırılması

Ahmet KARAKASLİ, Didem Venüs YILDIZ, Erdem KUMTEPE, Ceren KIZMAZOĞLU, Hasan HAVITÇIOĞLU