Halim KOVACI, Hojjat Ghahramanzadeh Asl, İrfan Kaymaz, Akgün ALSARAN, Ayhan ÇELİK, Gürsel SAKA

Radius Kırıklarında Plak Fiksasyonu Ve İntramedüller Çivileme Yöntemlerinin Teorik Olarak İncelenmesi

While forearm fractures are often treated with plate-screw osteosynthesis, intramedullary nailing gained importance recently. For this aim, radius bone model was obtained using CT images, a fracture was introduced to the model and the callus, which is a structure forms during healing, was added to the model. Plate and intramedullary nail models were implemented to radius model. Structural behaviors of obtained models and callus on treatments with various implants were investigated under axial loading. In the light of these analyses, stresses on bone-implant structure and callus movement were investigated from the angle of application and treatment, depending on implant selection.

Anahtar Kelimeler:

Radius şaft kırığı, Plak, İntramedüller çivi, Kallus Sonlu elemanlar yöntemi

Theoretical Investigation Of Plate Fixation And Intramedullary Nailing Methods On Radius Fractures

Keywords:

Radius shaft fracture Plate, Intramedullary nail, Callus, Finite element method,

PDF

___

Kovacı, H., Radius intramedüller çivilerde farklı sabitleme pozisyonları ile oluşan mekanik etkilerin sonlu elemanlar yöntemi ile incelenmesi. Atatürk Üniverisitesi, Fen Bilimleri Enstitüsü, 2011.
Weckbach, A., T. Blattert, and C. Weißer, Interlocking nailing of forearm fractures. Archives of Orthopaedic and Trauma Surgery, 2006. 126 (5): p. 309-315.
Jones, D.J., et al., A biomechanical comparison of two methods of fixation of fractures of the forearm. Journal of orthopaedic trauma, 1995. 9(3): p. 198.
Lee, Y.H., et al., Interlocking contoured intramedullary nail fixation for selected diaphyseal fractures of the forearm in adults. The Journal of Bone and Joint Surgery, 2008. 90 (9): p. 1891.
Houshian, S. and S.K. Bajaj, Forearm fractures in children:: Single bone fixation with elastic stable intramedullary nailing in 20 cases. Injury-International Journal of the Care of the Injured, 2005. 36 (12): p. 1421
Burkhart, K.J., et al., Intramedullary nailing vs. palmar locked plating for unstable dorsally comminuted distal radius fractures: A biomechanical study. Clinical Biomechanics, 2010. 25(8): p. 771-775.
Claes, L., et al., Influence of size and stability of the osteotomy gap on the success of fracture healing. Journal of orthopaedic research, 1997. 15 (4): p. 577-584.
Duda, G.N., et al., Interfragmentary movements in the early phase of healing in distraction and correction osteotomies stabilized with ring fixators. Langenbeck's Archives of Surgery, 2003. 387 (11): p. 433-440.
Kaspar, K., et al., Angle stable locking reduces interfragmentary movements and promotes healing after unreamed nailing. Study of a displaced osteotomy model in sheep tibiae. The Journal of Bone and Joint Surgery, 87 (9): p. 2028.
Klein, P., et al., The initial phase of fracture healing is specifically sensitive to mechanical conditions. Journal of orthopaedic research, 2003. 21 (4): p. 662-669.
Rogge, R.D., B.D. Adams, and V.K. Goel, An analysis of bone stresses and fixation stability using a finite element model of simulated distal radius fractures. The Journal of hand surgery, 2002. 27(1): p. 86-92.
Shefelbine, S.J., et al., Prediction of fracture callus mechanical properties using micro-CT images and voxel- based finite element analysis. Bone, 2005. 36 (3): p. 480-488.
Anderson, D.D., et al., A three-dimensional finite element model of the radiocarpal joint: distal radius fracture step-off and stress transfer. The Iowa Orthopaedic Journal, 2005. 25: p. 108.
Troy, K.L. and M.D. Grabiner, Off-axis loads cause failure of the distal radius at lower magnitudes than axial loads: a finite element analysis. Journal of biomechanics, 2007. 40 (8): p. 1670-1675.