Ağaç malzemede yüzey düzgünlüğüne, rendelemede kesiş yönü, bıçak sayısı ve çeşidinin etkileri
Bu çalışmada masif ağaç malzemenin rendeleme işleminde yüzey düzgünlüğüne kesiş yönü, bıçak sayısı ve bıçak çeşidinin etkilerinin belirlenmesi amaçlanmıştır. Bu maksatla mobilya endüstrisinde yaygın olarak kullanılan Doğu kayını ve sarıçam odunlarından hazırlanan 48 adet örnek üzerinde TS 930 standardına uyularak ağaç türü, kesiş yönü, kesici çeşidi ve bıçak sayısına göre yüzey pürüzlülük değerleri belirlenmiştir. Her örnekte dokunmalı iğneli tarama aleti ile 8 ölçüm yapılmıştır. Cihazın tarama alanı olan 20 mm mesafenin her 2.5 mm' si için belirlenen ortalama pürüzlülük değerleri, ağaç türü ve işlem çeşidine göre karşılaştırılmıştır. Sonuç olarak; teğet kesitlerde radyal kesitlere göre, 4 bıçaklı rendelemede 2 bıçaklı rendelemeye göre daha düzgün yüzeyler elde edilmiştir. Kesiş yönü ve kesici çeşidi etkileşimleri bu bakımdan önemsiz çıkmıştır.
Effect of the cutting direction, number of cutter and cutter type to surface smoothness on wood material for planning
In this study, it was aimed to determine that effect of the cutting direction, number of cutters and cutter types on surface smoothness of solid wood for planning process. For this purpose, 48 samples which were prapared from beech (Fagus orientalis L.) and scotch pine (Pinus sylvestris L.) have been widely used furniture industry were tested according to the principles of TS 930. The values of surface smoothness determined by wood species, cutting direction, cutter types and number of cutters for the per specimen, 8 measurements were made with irc. Determined values of mean surfaces roughness as compared with kind of wood and kind of process in the space of 20 mm area of search oftest machine for per 2.5 mm. As a result; more smooth surfaces have been obtained in the tangential surfaces according to radial surfaces and in the planning with 4 cutters than 2 cutters. In this respect, the interreactions of cutting direction and cutter type have not been significant.
___
- 1. Richter, K., Feist, W. C., Knaebe, M.T., The Effect of Surface Roughness on the Performance of Finishes. - Forest Products Journal. 45. 7, 91-97, 1905.
- 2. Akkurt, M., Takım Tezgahları Talaş Kaldırma ve Teknolojisi. İ.T.Ü. Makine Fakültesi. 79 - 98 İstanbul, 1985.
- 3. Stumbo, D.A., Surface Texture Measurements for Quality and Production Control. Forest Products Journal. 10.12, 122-124, 1960.
- 4. Örs, Y., Baykan, İ., Masif Ağaç Malzemede ve Zımparalamanın Yüzey Pürüzlülüğüne Etkileri. Tr. J. Of Agriculture and Forestry. 23 Ek Sayı 3. 577-582 Tübitak, 1999
- 5. Stumba, D. A., Surface Texture Measurement Methods. Forest Product Journal, 1961
- 6. Örs, Y., Çolakoğlu, G., Kalaycıoğlu, H., Testerelerde Diş Geometrisinin Kereste Yüzey Kalitesine Etkisi. Türk Tarım ve Ormancılık Dergisi, 1991.
- 7. Örs, Y., Demirci, S., Daire Testerelerde; Diş Sayısı, Kesiş Yönü ve Besleme Hızının Ağaç Malzeme Yüzey Düzgünlüğüne Etkileri. Politeknik Dergisi. 2.4, 1-5, 1999.
- 8. Örs, Y., Demirci, S., Daire Testerede Diş Sayısı;Besleme Hızı ve Kesiş Yönünün Meşe ve Akasya Odununda Yüzey Düzgünlüğüne Etkileri, Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 14.3, 857-867, 2001.
- 9. Gürleyen, L., Mobilyada Kullanılan Masif Ağaç Malzemelerde Yüzey Düzgünlüğünün Karşılaştırılması. G.Ü.Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Ankara 1998.
- 10. Stewart, H.A., Murmari, L., River, B.H., Surface and Subsurface Characteristics Related To Abrasive-Planning Conditions. Wood and Fiber Science. 18.1, 107-117, 1986.
- 11. Stewart, H.A., Comparison of Factor Affecting Power for Abrasive and Knife Planning of Hardwoods. Forest Products Journal. 24.3,31-34, 1975.
- 12. Afyonlu, S., Ağaç İşleri Takım ve Makine Bilgisi, Milli Eğitim Yayınları, Yayın No:571, Ankara 1977.
- 13. Timothy, D., Real Time Measurement of Veneer Surface Roughness By image Analysis, Forest Product Journal, 1986.
- 14. Sieminski, R., And Skarzynska, A., Surface Roughness of Different Species of Wood After Sanding, Forest Product Journal, 1989.