Hilmi Özden, Kadir Gök, Sermet İnal, Ferruh Taşpınar, Sezan Orak, Semih Öz, Eyyüb Gülbandılar

Static Analysis of the Most Weakness Part of Temporale Bone Using Finite Element Method and Its Clinical Importance Sonlu Elemanlar Yöntemi Kullanılarak Temporal Kemiğin Zayıf Noktalarının Statik Analizi ve Klinik Uygulaması

İnsan vücudu karmaşık bir yapıya sahiptir. Bu nedenle bu yapıyı incelemek için ileri düzeyde mühendislik araçlarına gereksinim vardır. Bu çalışmada, 5000 Pa basınçta altı farklı kişiden elde edilen temporal kemikler incelenmiştir. Bu basınç altında kemikler üzerinde meydana gelen gerilmeler, ANSYS Workbench yazılımı ile sonlu elemanlar yöntemi kullanılarak belirlenmiştir. Toplam deformasyonlar genellikle kemiklerin skuamoz bölgelerinde görülmüştür. Bu durum, temporal travmaların klinik açıdan değerlendirilmesinde önemlidir. Anahtar Kelimeler: Biyomekanik, Sonlu elemanlar yöntemi, Temporal kemik

Anahtar Kelimeler:

biyomekanik, sonlu elemanlar yöntemi

PDF

___

1. Reisser C, Schubert O, Forsting M, Sartor K. (1996) Anatomy of the Temporal Bone: Detailed Three-Dimensional Display Based on Image Data from High-Resolution Helical CT: A Preliminary Report. Otology & Neurotology 17 (3):473-479
2. Calhoun P.S, Kuszyk B.S, Heath D.G, Carley J.C, Fishman E.K. (1999) Three-dimensional Volume Rendering of Spiral CT Data: Theory and Method. RadioGraphics 19 (3):745-764. doi:doi:10.1148/radiographics.19.3.g99ma14745
3. Jun B-C, Song S-W, Cho J-E, Park C-S, Lee D-H, Chang K-H, Yeo S-W. (2005) Three-dimensional reconstruction based on images from spiral high-resolution computed tomography of the temporal bone: anatomy and clinical application. The Journal of Laryngology & Otology 119 (09):693-698. doi:doi:10.1258/0022215054797862
4. Soames R.W. (1995) Skeletal system. In: Williams PL (ed) Gray’s Anatomy. 38 edn. Churchill Livingstone, Great Britain, pp 589-593
5. Hliňáková P, Dostálová T, Daněk J, Nedoma J, Hlaváček I. (2010) Temporomandibular joint and its two-dimensional and three-dimensional modelling. Mathematics and Computers in Simulation 80 (6):1256-1268. doi:http://dx.doi.org/10.1016/j.matcom.2009.08.007
6. Bagci E. (2009) Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies. Advances in Engineering Software 40 (6):407-418. doi:http://dx.doi.org/10.1016/j.advengsoft.2008.07.003
7. Várady T, Martin R.R, Cox J. (1997) Reverse engineering of geometric models—an introduction. Computer-Aided Design 29 (4):255-268. doi:http://dx.doi.org/10.1016/S0010-4485(96)00054-1
8. Gan R.Z, Sun Q. Finite element modeling of human ear with external ear canal and middle ear cavity. In: Engineering in Medicine and Biology, 2002. 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society EMBS/BMES Conference, 2002. Proceedings of the Second Joint, 2002 2002. pp 264-265 vol.261. doi:10.1109/iembs.2002.1134484
9. Gan R.Z, Sun Q, Dyer R.K.J, Chang K-H, Dormer K.J. (2002) Three-dimensional Modeling of Middle Ear Biomechanics and Its Applications. Otology & Neurotology 23 (3):271-280
10. Lee C-F, Chen P-R, Lee W-J, Chou Y-F, Chen J-H, Liu T-C. (2010) Computer Aided Modeling of Human Mastoid Cavity Biomechanics Using Finite Element Analysis. EURASIP Journal on Advances in Signal Processing 2010 (1):203037
11. Beer H.J, Bornitz M, Hardtke H.J, Schmidt R, Hofmann G, Vogel U, Zahnert T, KB. H. (1999) Modelling of Components of the Human Middle Ear and Simulation of Their Dynamic Behaviour. Audiol & Neurootol 4 (3-4):156-16