Bu çalışmada, kasnaklı bir planet dişli sisteminin kinematik hesapları yapılmış, montaj ve imalat resimleri tasarımlanıp çizilmiş ve bir prototipi imal edilmiştir. Sistemin çeşitli hareket durumları incelenmiş ve en fazla zorlanmaya maruz kaldığı kritik durum tespit edilip, buna göre bilgisayar yardımıyla mil çapı hesabı yapılmıştır. Bu bilgisayar programı Turbo-PASCAL dilinde olup, değişkenlere göre en uygun mil çapını hesaplayabilecek şekilde yazar tarafından hazırlanmıştır.

In this study a pulley driven planet gear system has been designed and a prototype of it has been manufactured. In completing the system, firstly the kinematic calculations has been made, working and assembly drawings have been drawn and finally the prototype of the system has been developed. By examining of the system, under different working conditions, the situation in which the system was severely forced has been decided. Then the shaft diameter of the system was calculated by using a computer 'program according to this critical situation. This computer program used in calculation is Turbo-PASCAL and it is designed to be able to calculate the most suitable shaft diameters according to variables, by the author.