Mustafa Göktan AYDIN, Tolga DEPCİ, Emine YALMAN

Effect of Amorphous Silica Produced from Pumice and Quartzite on the Flow Characteristics of Drilling Mud

Various additives are introduced to drilling mud to control its flow behavior in drilling operations under the desired conditions. These additives can cause increased drilling costs and environmental damage. In recent years, natural materials have mainly been used in drilling mud to reduce the increasing costs. In this study, amorphous silica was obtained by alkaline extraction method from pumice and quartzite, having a large reserve in Turkiye. Amorphous silica, which is cost-effective and easy to supply, was used in the drilling mud and rheological and filtration tests of the fluids. The results obtained from the study indicate that drilling mud with 8, 9, and 10 % of amorphous silica exhibits promising results.

Keywords:

Amorphous silica, drilling mud rheology, pumice, quartzite,

PDF

___

Aftab, A. A. R. I., Ismail, A. R., Ibupoto, Z. H., Akeiber, H., & Malghani, M. G. K. (2017). Nanoparticles Based Drilling Muds a Solution to Drill Elevated Temperature Wells: A review. Renewable and Sustainable Energy Reviews, 76, 1301-1313. https://doi.org/10.1016/j.rser.2017.03.050.
Avci, E. (2018). Effect of Salinity on Flow Properties of Drilling Fluids: an Experimental Approach. Petroleum & Coal, 60(2).
Avci, E., & Mert, B. A. (2019). The Rheology and Performance of Geothermal Spring Water-Based Drilling Fluids. Geofluids. https://doi.org/10.1155/2019/3786293.
Aydın, M. G., Depci, T., & Aylıkcı, V. (2019). Usability of Diatomite as Additive Material in Water-Based Drilling Muds. In 4th International Energy and Engineering Congress Proceedings Book.
Aydın, M. G., Depci, T., Mert, S. O., & Bahçeci, E. (2019). Extracted of Amorphous Silica from Industrial Raw Materials to Use as an Additive for the Drilling Mud. In 4th International Energy and Engineering Congress Proceedings Book.
Ismail, A., Rashid, H. M. A., Gholami, R., & Raza, A. (2022). Characterization Based Machine Learning Modeling for the Prediction of the Rheological Properties of Water-Based Drilling Mud: an Experimental Study on Grass as an Environmental Friendly Additive. Journal of Petroleum Exploration and Production Technology, 12(6), 1677-1695. https://doi.org/10.1007/s13202-021-01425-6
Koyamparambath, A., Santillán-Saldivar, J., McLellan, B., & Sonnemann, G. (2022). Supply Risk Evolution of Raw Materials for Batteries and Fossil Fuels for Selected OECD Countries (2000–2018). Resources Policy, 75, 102465. https://doi.org/10.1016/j.resourpol.2021.102465.
Avci, E., Szabo, T., Federer, G. (2019). The Rheological Performance of Fly Ash in Inhibitive Water-Based Drilling Fluids. Petroleumcoal, 61(6), 1307–1313.
Yalman, E., Depci, T., Federer-Kovacs, G., Al Khalaf, H. (2021). A New Eco-Friendly and Low Cost Additive in Water Based Drilling Fluids. The Mining-Geology-Petroleum Engineering Bulletin, 56(5), 1-12. https://doi.org/10.17794/rgn.2021.5.1.
Yalman, E., Federer-Kovacs, G., Depci, T. (2022a). A New Insight into Formulation Approach for Water Based Drilling Fluids. Petroleum and Coal, 64 (1), pp. 182-194.
Yalman, E., Federer-Kovacs, G., Depci, T., Al Khalaf, H., Aylikci, V., & Aydin, M. G. (2022b). Development of novel inhibitive water-based drilling muds for oil and gas field applications. Journal of Petroleum Science and Engineering, 210, 109907. https://doi.org/10.1016/j.petrol.2021.109907.