C. B. SOBHAN, G. P. PETERSON

3710

Mikrokanallarda taşınımla ısı geçişinin bir incelemesi

Micro ölçülerdeki ısı transferi alanındaki analitik yöntemler ve karmaşık ölçüm tekniklerine dair son 5 yıldaki büyük ilerleme; mikrokanal akışının anlaşılmasına büyük katkıda bulunmuş ve geleneksel teorik modellerin hangi durumlarda mikrokanal akışındaki tsı transfer davranışını doğru tahmin etmek için kullanılabileceğini belirlemede yardımcı olmuştu. Burada sunulan, sürmekte olan birçok araştırma projesine dair tartışmalarla birlikte son 5 yılda konu üzerine yayımlanan, ısı transferi ve mikrokanal akışını içeren, eserlerin bir özetidir. Teorik ve deneysel çalışmalar, hesap analizleri daha yenilikçi modelleme tekniklerinin bazılarının tanımı ve bunlara dair tüm önemli bulgular burada sunulmuş, karşılaştırılmış ve tartışılmıştır.

A review of convective heat transfer in microchannels

The tremendous progress over the past five years in sophisticated measurement techniques and analytical methodologies in the area of microscale heat transfer have greatly added to the understanding of the phenomena unique to microchannel flow and has helped to clarify those situations where conventional theoretical models can be used to accurately describe and predict the flow and heat transfer behavior in microchannel flows. Presented here is a review of the published literature from the past five years, along with discussions of several ongoing research projects involving microchannel flow and heat transfer. Theoretical and experimental studies, computational analyses, a description of some of the more innovative instrumentation techniques, and important findings from all of these are presented, compared and discussed.
PDF

___

  • 1. Sobhan, C. B. and Garimella, S. V.,“A Comparative analysis of studies on heat transfer and fluid flow in microchannels,” Microscale Thermophysical Engineering, v 5, n 4, October/December, 2001, p 293-311.
  • 2. Garimella, S.V and Sobhan, C. B.,“Transport in Microchannels - A Critical Review,” Annual Review of Heat Transfer, Vol. 13, 2003, p. 1-50.
  • 3. Palm, B.,“Heat transfer in microchannels,” Microscale Thermophysical Engineering, v 5, n 3, July/September, 2001, p 155-175.
  • 4. Rostami, A.A., Mujumdar, A.S. and Saniei, N.,“Flow and heat transfer for gas flowing in microchannels: A review,” Heat and Mass Transfer/Waerme- und Stoffuebertragung, v 38, n 4-5, April, 2002, p 359-367.
  • 5. Guo, Z. Y.and Li, Z. X.“Size effect on microscale singlephase flow and heat transfer,” International Journal of Heat and Mass Transfer, v 46, n 1, January, 2003, p 149-159.
  • 6. Thome, J. R.,“Boiling in microchannels: A review of experiment and theory,” International Journal of Heat and Fluid Flow, v 25, n 2, April, 2004, p 128-139.
  • 7. Fedorov, A. G. and Viskanta, R.,“Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging,” International Journal of Heat and Mass Transfer, v 43, n 3, Feb, 2000, p 399-415.
  • 8. Qu, W., Mala, G. M., and Li, D.,“Pressure-driven water flows in trapezoidal silicon microchannels,” International Journal of Heat and Mass Transfer, v 43, n 3, Feb, 2000, p 353-364.
  • 9. Qu, W., Mala, G. M. and Li, D.,“Heat transfer for water flow in trapezoidal silicon microchannels,” International Journal of Heat and Mass Transfer, v 43, n 21, Nov, 2000, p 3925-3936.
  • 10. Kim, S.J., Kim, D., and Lee, D.Y.,“On the local thermal equilibrium in microchannel heat sinks,” International Journal of Heat and Mass Transfer, v 43, n 10, Mar, 2000, p 1735-1748.
  • 11. Richardson, D.H., Sekulic, D.P. and Campo, A.,“Reynolds number flow inside straight micro channels with irregular cross-sections,” Heat and Mass Transfer/Waerme- und Stoffuebertragung, v 36, n 3, May, 2000, p 187-193.
  • 12. Ryu, J.H., Choi, D.H.and Kim, S.J.“Numerical optimization of the thermal performance of a microchannel heat sink,” International Journal of Heat and Mass Transfer, v 45, n 13, May 6, 2002, p 2823-2827.
  • 13. Ryu, J.H., Choi, D.H. and Kim,S.J.,“Three-dimensional numerical optimization of a manifold microchannel heat sink ,” International Journal of Heat and Mass Transfer, v 46, n 9, April, 2003, p 1553-1562.
  • 14. Qu, W. and Mudawar, I.,“Analysis of three-dimensional heat transfer in micro- channel heat sinks,” International Journal of Heat and Mass Transfer, v 45, n 19, Jul 1, 2002, p 3973-3985.
  • 15. Zhao, C.Y. and Lu, T.J.,“Analysis of microchannel heat sinks for electronics cooling ,” International Journal of Heat and Mass Transfer, v 45, n 24, Sep 16, 2002, p 4857-4869.
  • 16. Toh, K.C., Chen, X.Y. and Chai, J.C.,“Numerical computation of fluid flow and heat transfer in microchannels,” International Journal of Heat and Mass Transfer, v 45, n 26, December, 2002, p 5133-5141.
  • 17. Kim, Sung Jin, “Methods for thermal optimization of microchannel heat sinks,” Heat Transfer Engineering, v 25, n 1, January/February, 2004, p 37-49.
  • 18. Nakayama, W., Ohba, Y. and Maeda, K.“The effects of geometric uncertainties on micro-channel heat transfer - A CFD study on the tilted-cover problem,” Heat Transfer Engineering, v 25, n 1, January/February, 2004, p 50-60.
  • 19. Van Male, P., de Croon, M., Tiggelaar, R.M., Van den Berg, A. and Schouten, J.C.,“Heat and mass transfer in a square microchannel with asymmetric heating,” International Journal of Heat and Mass Transfer, v 47, n 1, January, 2004, p 87- 99.
  • 20. Tchikanda, S.W., Nilson, R.H. and Griffiths, S.K.,“Modeling of pressure and shear-driven flows in open rectangular microchannels,” International Journal of Heat and Mass Transfer, v 47, n 3, January, 2004, p 527-538.
  • 21. Min, J.Y., Jang, S. P, and Kim, S.J.,“Effect of tip clearance on the cooling performance of a microchannel heat sink,” International Journal of Heat and Mass Transfer, v 47, n 5, February, 2004, p 1099-1103.
  • 22. Koo, J. and Kleinstreuer, C.,“Viscous dissipation effects in microtubes and microchannels,” International Journal of Heat and Mass Transfer, v 47, n 14-16, July, 2004, p 3159-3169.
  • 23. Koo, J., and Kleinstreuer, C.,“Analysis of surface roughness effects on heat transfer in micro-conduits,” International Journal of Heat and Mass Transfer, v 48, n 13, June, 2005, p 2625-2634.
  • 24. Koo, J. and Kleinstreuer, C.,“Laminar nanofluid flow in microheat-sinks,” International Journal of Heat and Mass Transfer, v 48, n 13, June, 2005, p 2652- 2661.
  • 25. Horiuchi, K. and Dutta, P.,“Joule heating effects in electroosmotically driven microchannel flows,” International Journal of Heat and Mass Transfer, v 47, n 14-16, July, 2004, p 3085-3095.
  • 26. Azimian, A.R. and Sefid, M.,“Performance of microchannel heat sinks with newtonian and nonnewtonian fluids,” Heat Transfer Engineering, v 25, n 8, December, 2004, p 17-27.
  • 27. Morini, G. L.“Laminar-to-turbulent flow transition in microchannels,” Microscale Thermophysical Engineering, v 8, n 1, January/March, 2004, p 15-30.
  • 28. Maynes, D. and Webb, B.W.,“Fully developed electroosmotic heat transfer in microchannels ,” International Journal of Heat and Mass Transfer, v 46, n 8, April, 2003, p 1359-1369.
  • 29. Maynes, D. and Webb, B.W.,“Fully-developed thermal transport in combined pressure and electro-osmotically driven flow in microchannels,” Journal of Heat Transfer, v 125, n 5, October, 2003, p 889-895.
  • 30. Maynes, D. and Webb, B.W.,“The effect of viscous dissipation in thermally fully-developed electro-osmotic heat transfer in microchannels ,” International Journal of Heat and Mass Transfer, v 47, n 5, February, 2004, p 987-999.
  • 31. Ng, E.Y.K. and Tan, S.T.,“Computation of three-dimensional developing pressure-driven liquid flow in a microchannel with EDL effect,” Numerical Heat Transfer; Part A: Applications, v 45, n 10, Jun 18, 2004, p 1013-1027.
  • 32. Tardu, S.,“Analysis of the electric double layer effect on microchannel flow stability,” Microscale T h e r m o p h y s i c a l E n g i n e e r i n g, v 8 , n 4 , October/December, 2004, p 383-401.
  • 33. Chen, X.Y., Toh, K.C., Yang, C. and Chai, J.C. ,“Numerical computation of hydrodynamically and thermally developing liquid flow in microchannels with electrokinetics effects,” Journal of Heat Transfer, v 126, n 1, February, 2004, p 70-75.
  • 34. Chen, Y. and Cheng, P.,“Heat transfer and pressure drop in fractal tree-like microchannel nets,” International Journal of Heat and Mass Transfer, v 45, n 13, May 6, 2002, p 2643-2648.
  • 35. Li, B. and Kwok, D. Y.,“A lattice Boltzmann model for electrokinetic microchannel flow of electrolyte solution in the presence of external forces with the Poisson-Boltzmann equation,” International Journal of Heat and Mass Transfer, v 46, n 22, October, 2003, p 4235-4244.
  • 36. Wu, H.Y. and Cheng, P.,“Friction factors in smooth trapezoidal silicon microchannels with different aspect ratios,” International Journal of Heat and Mass Transfer, v 46, n 14, July, 2003, p 2519-2525.
  • 37. Ma, H. B. and Peterson, G.P.,“Laminar friction factor in microscale ducts of irregular cross-section,” Microscale Thermophysical Engineering, v 1, n 3, July- September 1997, p 253-265.
  • 38. Cheng, P., and Wu, H.Y.,“An experimental study of convective heat transfer in silicon microchannels with different surface conditions,” International Journal of Heat and Mass Transfer, v 46, n 14, July, 2003, p 2547-2556.
  • 39.Garimella, S.V., Singhal, V., "Single-phase flow and heat transport and pumping considerations in microchannel heat sinks," Heat Transfer Engineering, v 25, n 1, January/February, 2004, p 15-25.
  • 40.Liu, D., Garimeiia, S, V., "Investigation of liquid flow in microchannels," Journal of Thermophysics and Heat Transfer, vl 8, n 1, January/March, 2004, p 65-72.
  • 41.Lee, P. S., Garimella, S.V. and Liu, D., "Investigation of heat transfer in rectangular microchannels," International Journal of Heat and Mass Transfer, v 48, n 9, April, 2005, pi 688-1704.
  • 42.Favre-Marinet, M., Le Person, S. and Bejan, A., "Maximum heat transfer rate density in two- dimensional minichannels and microchannels," Microscale Thermophysical Engineering, v 8, n 3, July/September, 2004, p 225-237
  • 43.Judy, J., Maynes, D. and Webb, B.W., "Characterization of frictional pressure drop for liquid flows through microchannels," International Journal of Heat and Mass Transfer, v 45, n 17, Jun 10,2002, p 3477-3489
  • 44.Lelea, D., Nishio, S.; Takano, K., "The experimental research on microtube heat transfer and fluid flow of distilled water," International Journal of Heat and Mass Transfer, v47,n 12-13, June, 2004, p 2817-2830.
  • 45.Ren, L., Qu, W. and Li, D., "Interfacial electrokinetic effects on liquid flow in microchannels," International Journal of Heat and Mass Transfer, v 44, n 16, Jun 19, 2001, p 3125-3134.
  • 46.Jiang, P.X., Fan, M. H., Si, G. S.and Ren, Z. P., "Thermal- hydraulic performance of small scale micro-channel and porous-media heat-exchangers," International Journal of Heat and Mass Transfer, v 44, n 5, Mar, 2001, p 1039-1051
  • 47.Yin, J. M., Bullard, C. W. and Hrnjak, P. S., "Single- phase pressure drop measurements in a microchannel heat exchanger," Heat Transfer Engineering, v 23, n 4, July/August, 2002, p 3-12.
  • 48.Xu, J.L., Gan, Y.H., Zhang, D.C. and Li, X.H., "Microscale heat transfer enhancement using thermal boundary layer redeveloping concept," International Journal of Heat and Mass Transfer, v 48, n 9, April, 2005, p 1662-1674.
  • 49.Steinke, Mark E., Kandlikar, S. G.- "An experimental investigation of flow boiling characteristics of water in parallel microchannels," Journal of Heat Transfer, v 126, n 4, August, 2004, p 518-526.
  • 50.Celata, G. P., "Single-phase heat transfer and fluid flow in micropipes," Heat Transfer Engineering, v 25, n 3, April/May, 2004, pi 3-22.
  • 51.Eason, C., Dalton, T., Davies, M., O'Mathuna, C. and Slattery, O., "Direct comparison between five different microchannels, part 1: Channel manufacture and measurement," Heat Transfer Engineering, v 26, n 3, April, 2005, p 79-88.
  • 52.Eason, C., Dalton, T., Davies, M., O'Mathuna, C. And Slattery, O., "Direct comparison between five different microchannels, part 2: Experimental description and flow friction measurement," Heat Transfer Engineering, v 26, n 3, April, 2005, p 89-98.
  • 53.Newport, D., Garvey, J., Dalton, T., Egan, V. and Whelan, M., "Development of interferometric temperature measurement procedures for microfluid flow," Microscale Thermophysical Engineering, v 8, n 2, April/June, 2004, pi 41-154.
  • 54.Kockmann, N., Engler, M., Haller, D. and Woias, P., "Fluid dynamics and transfer processes in bended microchannels," Heat Transfer Engineering, v 26, n 3, April, 2005, p 71-78.
  • 55.Nishio, S., (Institute of Industrial Science, University of Tokyo), "Single-Phase Laminar-Flow Heat Transfer and Two-Phase Oscillating-Flow Heat Transport in Microchannels," Heat Transfer Engineering, v 25, n 3, April/May, 2004, p 31-43.
  • 56.Kandlikar, S. G. and Grande, W. J., "Evaluation of single-phase flow in microchannels for high heat flux chip cooling-thermohydraulic performance enhancement and fabrication technology," Heat Transfer Engineering, v 25, n 8, December, 2004, p 5-16.
  • 57.Li, J. and Cheng, P., "Bubble cavitation in a microchannel," International Journal of Heat and Mass Transfer, v47, n 12-13, June, 2004, p 2689-2698.
  • 58.Peng, X.F., Liu, D., Lee, D.J., Yan, Y., and Wang, B.X., "Cluster dynamics and fictitious boiling in microchannels," International Journal of Heat and Mass Transfer, v 43, n 23, Dec, 2000, p 4259-4265
  • 59.Peng, X.F., Tian, Y. and Lee, D.J., "Arguments on microscale boiling dynamics," Microscale Thermophysical Engineering, v 6, n 1, January 2002, p 75-83.
  • 60.Peng, X.F.; Liu, D. And Lee, D.J., "Dynamic characteristics of microscale boiling," Heat and Mass Transfer/Waerme- und Stoffuebertragung, v 37, n 1, January, 2001, p 81-86.
  • 61.Peng, X.F., Tien, Y. and Lee, D.J., "Bubble nucleation in microchannels: Statistical mechanics approach," International Journal of Heat and Mass Transfer, v 44, n 15, Jun 8,2001, p 2957-2964
  • 62.Jacobi, A. M. and Thome, J. R., "Heat transfer model for evaporation of elongated bubble flows in microchannels," Journal of Heat Transfer, v 124, n 6, December, 2002, p 1131 -1136.
  • 63.Thome, J.R , Dupont, V. and Jacobi, A.M., "Heat transfer model for evaporation in microchannels. Part I: Presentation of the model ," International Journal of Heat and Mass Transfer, v 47, n 14-16, July, 2004, p 3375-3385.
  • 64.Dupont, V., Thome, J.R. and Jacobi, A.M., "Heat transfer model for evaporation in microchannels. Part II: Comparison with the database," International Journal of Heat and Mass Transfer, v 47, n 14-16, July, 2004,p3387-3401.
  • 65.Nilson, R.H., Griffiths, S.K., Tchikanda, S.W. and Martinez, M.J., "Axially tapered microchannels of high aspect ratio for evaporative cooling devices," Journal of Heat Transfer, v 126, n 3, June, 2004, p 453-462.
  • 66.Chakraborty, S. and Som, S.K., "Heat transfer in an evaporating thin liquid film moving slowly along the walls of an inclined microchannel ," International Journal of Heat and Mass Transfer, v 48, n 13, June, 2005, p2801-2805.
  • 67.Hao.Y.L.and Too, Y.-X., "A numerical model for phase- change suspension flow in microchannels," Numerical Heat Transfer; Part A: Applications, v 46, n 1, Jul 2,2004, P55-77.
  • 68.Du, X.Z., Zhao, IS. Analysis of film condensation heat transfer inside a vertical micro tube with consideration of the meniscus draining effect," International Journal of Heat and Mass Transfer, v 46, n 24, November, 2003, p 4669-4679.
  • 69.Kandlikar, S. G. and Balasubramanian, P., "An Extension of the Flow Boiling Correlation to Transition, Laminar, and Deep Laminar Flows and Microchannels Source: Heat Transfer Engineering, v 25, n 3, April/May, 2004, p 86-93.
  • 70.Steinke, M. E. and Kandlikar, S. G., "An experimental investigation of flow boiling characteristics of water in parallel microchannels," Journal of Heat Transfer, v 126, n 4, August, 2004, p 518-526.
  • 71.Steinke, M. E. and Kandlikar, S. G., "Control and effect of dissolved air in water during flow boiling in microchannels," International Journal of Heat and Mass Transfer, v 47, n 8-9, April, 2004, p 1925-1935.
  • 72.Kandlikar, S. G., "Heat transfer mechanisms during flow boiling in microchannels," Journal of Heat Transfer, v 126, n 1, February, 2004, p 8-16.
  • 73.Balasubramanian, P. and Kandlikar, S. G., "Experimental study of flow patterns, pressure drop, and flow instabilities in parallel rectangular minichannels," Heat Transfer Engineering, v 26, n 3, April, 2005, p 20-27.
  • 74.Wu, H.Y. and Cheng, P., "Boiling instability in parallel silicon microchannels at different heat flux," International Journal of Heat and Mass Transfer, v 47, n 17-18, August, 2004, p 3631-3641.
  • 75.Cheng,P. and Wu, H.Y., "Liquid/two-phase/vapor alternating flow during boiling in microchannels at high heat flux," International Communications in Heat and Mass Transfer, v 30, n 3, April, 2003, p 295-302.
  • 76.Wu, H.Y. and Cheng, P., "Condensation flow patterns in silicon microchannels," International Journal of Heat and Mass Transfer, v 48, n 11, May, 2005, p 2186- 2197.
  • 77.Ghiaasiaan, S.M. and Chedester, R.C., "Boiling incipience in microchannels," International Journal of Heat and Mass Transfer, v 45, n 23, Sep 9, 2002, p 4599-4606.
  • 78.Piasecka, M. and Poniewski, M. E., "Hysteresis Phenomena at the Onset of Subcooled Nucleate Flow Boiling in Microchannels," Heat Transfer Engineering, v 25, n 3, April/May, 2004, p 44-51.
  • 79.Hetsroni, G., Klein, D., Mosyak, A.., Segal, Z. and Pogrebnyak, E., "Convective boiling in parallel microchannels," Microscale Thermophysical Engineering, v 8, n 4, October/December, 2004, p 403-421.
  • 80.Hetsroni, G., Mosyak, A., Segal, Z. and Ziskind, G., "A uniform temperature heat sink for cooling of electronic devices," International Journal of Heat and Mass Transfer, v 45, n 16, May 27,2002, p 3275-3286.
  • 81.Lee, P.C., Tseng, F.G. and Pan, C., "Bubble dynamics in microchannels. Part I: Single microchannel," International Journal of Heat and Mass Transfer, v 47, n 25, December, 2004, p 5575-5589.
  • 82.Li, H.Y., Tseng, F.G. and Pan, C., "Bubble dynamics in microchannels. Part II: Two parallel microchannels," International Journal of Heat and Mass Transfer, v 47, n 25, December, 2004, p 5591-5601.
  • 83.Zhang, L., Wang, E. N., Goodson, K. E., Kenny, T.W., "Phase change phenomena in silicon microchannels," International Journal of Heat and Mass Transfer, v 48, n 8, April, 2005, p 1572-1582.
  • 84- Hsu, Y.Y, "On the size range of active nucleation cavities on a heating surface," ASME Journal of Heat Transfer, August 1962, p. 207-216.
  • 85.Brutin, D., Topin, F. and Tadrist, L. "Experimental study of unsteady convective boiling in heated minichannels," International Journal of Heat and Mass Transfer, v 46, n 16, July, 2003, p 2957-2965.
  • 86.Wang, E. N., Devasenathipathy, S., Santiago, J. G., Goodson, K. E. and Kenny, T.W., "Nucleation and growth of vapor bubbles in a heated silicon microchannel," Journal of Heat Transfer, v 126, n 4, August, 2004, p497-498.
  • 87.Son.S.Y., Allen, J.S., "Visualization of wettability effects on microchannel two- phase flow resistance," Journal of Heat Transfer, v 126, n 4, August, 2004, p 498-499.
  • 88.Coleman, J. W, "An Experimentally Validated Model for Two-Phase Sudden Contraction Pressure Drop in MicroChannel Tube Headers," Source: Heat Transfer Engineerings 25, n 3, April/May, 2004, p 69-77.
  • 89.Kawahara, A., Sadatomi, M., Okayama, K., Kawaji, M. and Chung, P.M., "Effects of channel diameter and liquid properties on void fraction in adiabatic two-phase flow through microchannels," Heat Transfer Engineering, v 26, n 3, April, 2005, p 13-19.
  • 90.Bergles, A.E. and Kandlikar, S.G., "On the nature of critical heat flux in. microchannels," Journal of Heat Transfer, v 127, n 1, January, 2005, p 101 -107.
  • 91.Garimella, S.,"Condensation Flow Mechanisms in Microchannels: Basis for Pressure Drop and Heat Transfer Models," Heat Transfer Engineering, v 25, n 3, April/May, 2004, pi 04-116.
  • 92.Garimella, S., Agarwal, A. and Killion, J. D., "Condensation pressure drop in circular microchannels," Heat Transfer Engineering, v 26, n 3, April, 2005, p 28-35.
  • 93.Li, J. M.,Wang, B. X. and Peng, X. F., "Wall- adjacent layer analysis for developed-flow laminar heat transfer of gases in microchannels," International Journal of Heat and Mass Transfer, v 43, n 5, Dec, 2000, p 839-847.
  • 94.Yu, S. and Ameel, T.A., "Slip-flow heat transfer in rectangular microchannels," International Journal of Heat and Mass Transfer, v 44, n 22, Sep 18, 2001, p 4225-4234.
  • 95.Yu, S. and Ameel, T. A., "Slip flow convection in isoflux rectangular microchannels," Journal of Heat Transfer, v 124, n 2, April, 2002, p 346-355.
  • 96.Tunc, G. and Bayazitoglu, Y., "Heat transfer in rectangular microchannels," International Journal of Heat and Mass Transfer, v 45, n 4, Dec 18, 2002, p 765-773.
  • 97.Sun, H. and Faghri, M., "Effect of surface roughness on nitrogen flow in a microchannel using the direct simulation Monte Carlo method," Numerical Heat Transfer; Part A: Applications, v 43, n 1, January, 2003, p 1-8.
  • 98.Colin, S., Lalonde, P. and Caen, R., "Validation of a Second-Order Slip Flow Model in Rectangular Microchannels," Heat Transfer Engineering, v 25, n 3, April/May, 2004, p 23-30.
  • 99.Raju, R. and Roy, S., "Hydrodynamic study of high­ speed flow and heat transfer through a microchannel," Journal of Thermophysics and Heat Transfer, v 19, n 1, January/March, 2005, p 106-113.
  • 100.Chen, C.S. and Kuo, W.J., "Heat transfer characteristics of gaseous flow in long mini and microtubes," Numerical Heat Transfer; Part A: Applications, v 46, n 5, September, 2004, p 497-514,
  • 101.Asako, Y. and Toriyama, H., "Heat transfer characteristics of gaseous flows in microchannels," Microscale Thermophysical Engineering, v9, n 1, January/March, 2005, p 15-31.
  • 102.Choi, H., Lee, D. and Maeng, J.S., "Computation of slip flow in microchannels using Langmuir slip condition," Numerical Heat Transfer; Part A: Applications, v 44, n 1, July, 2003, p 59-71.
  • 103.Tso, C.P. and Mahulikar, S.P., "Combined evaporating meniscus-driven convection and radiation in annular microchannels for electronics cooling application," International Journal of Heat and Mass Transfer, v43, n 6, Jan, 2000, p 1007-1023.
  • 104.Hsieh, S.S. Tsai, H. H.,.Lin, C. Y., ;Huang, C. F. and Chien, C. M., " Gas flow in a long microchannel, " International Journal of Heat and Mass Transfer, v 47, n 1 7-1 8, August, 2004, p3877-3887.
  • 105.Turner, S. E., Lam, L. C., Faghri, M. and Gregory, O. J., "Experimental investigation of gas flow in microchannels," Journal of Heat Transfer, v 126, n 5, October, 2004, p 753-763.
  • 106.Kohl, M.J., Abdel-Khalik, S.I., Jeter, S.M. and Sadowski, D.L., "An experimental investigation of microchannel flow with internal pressure measurements," International Journal of Heat and Mass Transfer, v48, n 8, April, 2005, p 1518-1533.
  • 107.Murakami, Y. and Mikic, B. B., "Parametric investigation of viscous dissipation effects on optimized air cooling microchanneled heat sinks," Heat Transfer Engineering, v 24, n 1, January/February, 2003,p53-62.
  • 108.Kim, S. J., "Methods for thermal optimization of microchannel heat sinks," Heat Transfer Engineering, v 25, n 1, January/February, 2004, p 37-49.
  • 109.Nakayama, W. Ohba, Y. and Maeda, K., "The effects of geometric uncertainties on micro-channel heat transfer - A CFD study on the tilted-cover problem," Heat Transfer Engineering, v 25, n 1, January/February, 2004, p 50-60.
  • 110.Eason, C., Dalton, T., Davies, M., O'Mathuna, C. and Slattery, O., "Direct comparison between five different microchannels, part 1: Channel manufacture and measurement," Heat Transfer Engineering, v 26, n 3, April, 2005, p 79-88.
  • 111.Hrnjak, P., "Developing Adiabatic Two-phase Flow in Headers - Distribution Issue in Parallel Flow MicroChannel Heat Exchangers," Heat Transfer Engineering, v 25, n 3, April/May, 2004, p 61 -68.
  • 112.Li, J., Peterson, G. P. and Cheng, P., "Three- Dimensional Analysis of Heat Transfer in a Micro Heat Sink with Single-phase Flow," Int'l. J. Heat and Mass Transfer, vol. 47,2004, p. 4215-4231.
  • 113.Li, J. and Peterson, G. P., "Geometric Optimization of a Micro Heat Sink with Liquid Flow," IEEE Tran on Comp. and Packaging Technologies, 2005.
  • 114.Li, J. and Peterson, G. P., "Boiling Nucleation and two- phase flow patterns in forced liquid flow in microchannels," International Journal of Heat and Mass Transfer, 2005 (in press).
  • 115.Wang, Y.X. and Peterson, G. P., "Capillary Evaporation in Microchanneled Polymer Films," paper no. AIAA-2002-2767, 8th AMSE/AIAA Joint Thermophysicsand heat Transfer Conference, St. Louis, MO, 2002.
  • 116.Wang, Y.X., and Peterson, G. P. (2003) "Capillary Evaporation in Microchanneled Polymer Films," AIAA J. Thermophysics and Heat Transfer, v 17, n3, 2003, p. 354-359.
  • 117.McDaniels, D. and Peterson, G. P. (2001) "Investigation Polymer Based Micro Heat Pipes for Flexible Spacecraft Radiators," Proc. ASME Heat Transfer Division, HTD-Vol. 142, NewYork,NY.,2001.
  • 118.Peterson, G. P. and Sobhan, C. B. "Applications of Microscale Phase Change Heat Transfer: Micro Heat Pipes and Micro Heat Spreaders," Handbook of Microelectromechanical Systems, Mohamed Gad-el-Hak (ed.), CRC Press Inc.,pp. 2nd Edition, 2005.
  • 119.Sobhan, C. B. and Peterson, G. P, "Modeling of the Flow and Heat Transfer in Micro Heat Pipes," 2nd International Conference on Microchannels and Minichannels, Rochester, NY, June 15-17,2004.
Mühendis ve Makina-Cover
  • ISSN: 1300-3402
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1957
  • Yayıncı: TMMOB MAKİNA MÜHENDİSLERİ ODASI
Arşiv
Sayıdaki Diğer Makaleler

Mikrokanallarda akış tipi kaynama ile ısı trasferi konusunda son gelişmeler

Satish G. KANDLİKAR

Mikrokanallarda taşınımla ısı geçişinin bir incelemesi

C. B. SOBHAN, G. P. PETERSON

Mikrokanallar ve kapiler borularda elektrokinetik olarak yönlendirilen akım

CÜNEYT SERT

Mikrokanallarda tek-fazlı akışkan akışı ve ısı geçişi

Gian Luca MORINI, Marco LORENZINI