___

• Tomoshige, R., Goto, T., Matsushita, T., Imamura, K., Chiba, A., Fujita, M. 1999. “High-temperature-shock compaction of ceramics:silicide composites produced by combustion synthesis,” Journal of Materials Processing Technology, vol. 85, p. 100–104.
• Mamalis, A.G., Vottea, I.N., Manolakos, D.E. 2001. “On the modelling of the compaction mechanism of shock compacted powders,” Journal of Materials Processing Technology, vol. 108, p. 165-178.
• Hegazy, A.A. 2000. “Bonding and properties of explosively compacted copper powder and polypropylene granules,” Current Advances in Mechanical Design and Production, Seventh Cairo University International MDP Conference, Cairo, February 15-17, p. 415-421.
• Zohoor, M., Mehdipoor, A. 2009. “Explosive compaction of tungsten powder using a converging underwater shock wave,” Journal of Materials Processing Technology, vol. 209, p. 4201–4206.
• Zheng, Z., Xiao-jie, L., Gang, T., Chang-xing, D. 2009. “CuCr bulk alloy produced by mechanical alloying and explosive compaction,” Transactions of Nonferrous Metals Society of China, vol. 19, p. 626-629.
• Gourdin, W.F. 1984. “Energy deposition and microstructural modification in dynamically consolidated metal powders,” Journal of Applied Physics, vol. 55, p. 172.
• Kasiraj, P., Vreeland, T., Schwarz, R.B., Ahrens, J. 1984. “Shock consolidation of a rapidly solidified steel powder,” Acta Metallurgica, vol. 32, no. 8, p. 1235-1241.
• Prümmer, R. 1988. “Explosive compaction of metallic glass powders,” Materials Science and Engineering, vol. 98, p. 461-463.
• Berg, S., Häggblad, H.A., Jonsén, P. 2011. “High-pressure compaction modelling of calcite (CaCO3) powder compact,” Powder Technology, vol. 206, p. 259–268.
• Häggblad, H.A., Hockauf, M., Eriksson, M., Berggren, C. 2005. “Simulation of high velocity compaction of powder in a rubber mould with characterization of silicone rubber and titanium powder using a modified split Hopkinson set-up,” Powder Technology, vol. 154, p. 33–42.
• Skoglund P. 2001. “High density P/M components by high velocity compaction,” International conference on power transmission components, Ypsilanti, MI (USA), October 16–17.
• Cambronero, L.E.G., Gordo, E., Torralba, J.M., Ruiz-Prieto, J.M. 1996. “Comparative study of high speed steels obtained through explosive compaction and hot isostatic pressing,” Materials Science and Engineering A, vol. 207, p. 36-45.
• Ando, S., Mine, Y., Takashima, K., Itoh, S., Tonda, H. 1999. “Explosive compaction of Nd-Fe-B powder,” Journal of Materials Processing Technology, vol. 85, p. 142–147.
• Chiba, A., Nishida, M., Yamaguchi, T., Tosaka, J. 1988. “Explosive consolidation of titanium powder with a pressure medium,” Scripta Metallurgica, vol. 22, p. 213-217.
• Schwarz, R.B., Kasiraj, P., Vreeland, T., Ahrens, J. 1984. “A theory for the shock-wave consolidatıon of powders,” Acta Metallurgica, vol. 32, no. 8, p. 1243-1252.
• Tomoshige, R., Kakoki, Y., Imamura, K., Chiba, A. 1999. “Effect on addition of titanium diboride to titanium carbide produced by the SHS: shock consolidation method,” Journal of Materials Processing Technology, vol. 85, p. 105–108.
• Wang, S., Sun, C., Guo, W., Yan, Q., Zhou, Z., Zhang, Y., Shen, W., Ge, C. 2014. “Review on the explosive consolidation methods to fabricate tungsten based PFMs,” Journal of Nuclear Materials, vol. 455, p. 174–179.
• Li, J. P., Meng, S. H., Han, J. C., Wang, B. L. 2008. “Energy and deformation during explosive compaction of ZrB2-SiC ultrahigh temperature ceramics,” Scholarly Research Exchange, doi:10.3814/2008/754838.
• Sivakumar, K., Balakrishna Bhat, T., Ramakrishnan, P. 1998. “Effect of process parameters on the densification of 2124 Al–20vol.% SiCp composites fabricated by explosive compaction,” Journal of Materials Processing Technology, vol. 73, p. 268–275.
• Zheng, Z., Xiao-jie, L., Gang, T. 2009. “Manufacturing nano-alumina particle-reinforced copper alloy by explosive compaction,” Journal of Alloys and Compounds, vol. 478, p. 237–239.
• Karimi, Y., Mehdipoor, A., Alizadeh, A. 2016. “Consolidation of bulk TiB2 by underwater explosive compaction,” Ceramics International, vol. 42, p. 11543–11547.
• Kim, Y., Ueda, T., Hokamoto, K., Itoh, S. 2009. “Electric and microstructural characteristics of bulk ZnO fabricated by underwater shock compaction,” Ceramics International, vol. 35, p. 3247–3252.
• Farinha, A.R., Mendes, R., Baranda, J., Calinas, R., Vieira, M.T. 2009. “Behavior of explosive compacted/consolidated of nanometric copper powders,” Journal of Alloys and Compounds, vol. 483, p. 235–238.
• Mamalis, A.G., Gioftsidis, G.N. 1990. “A consolidation mechanism for the compaction of copper powder at high pressures,” Journal of Materials Processing Technology, vol. 23, p. 333-345.
• Godibadze, B. A., Chagelishvili, E. Sh., Peikrishvili, A. B., Tsiklauri, M. V., Dgebaudze, A.A. 2015. “Explosive fabrication of Cu-C and Cu-W materials,” Procedia Earth and Planetary Science, vol. 15, p. 448-453.
• Zhou, Q., Chen, P. 2015. “Characterization of fine-grained W–10 wt.% Cu composite fabricated by hot-shock consolidation,” International Journal of Refractory Metals and Hard Materials, vol. 52, p. 137-142.
• Zhou, Q., Chen, P. 2016. “Fabrication of W-Cu composite by shock consolidation of Cu-coated W powders,” Journal of Alloys and Compounds, vol. 657, p. 215-223.
• Cline, C.F., Hopper, R.W. 1977. “Explosive fabrication of rapidly quenched materials,” Scripta Metallurgica, vol. 11, p. 1137- 1138.
• Morris, D. G. 1980. “Compaction and mechanical properties of metallic glass,” Materials Science and Technology, vol. 14, no. 6, p. 215-220.
• Kasiraj, P., Kostka, O., Vreeland, T., Ahrens, J. 1984. “Shock wave consolidation of an amorphous alloy,” Journal of Non-Crystalline Solids, vol. 61-62, p. 967-972.
• Murr, L.E., Shankar, S., Hare, A.W., Staudhammer, K.P. 1983. “Explosive consolidation of an amorphous iron-base powder,” Scripta Metallurgica, vol. 17, p. 1353-1357.
• Shao, B., Liu, Z., Zhang, X. 1999. “Explosive consolidation of amorphous cobalt-based alloys,” Journal of Materials Processing Technology, vol. 85, p.121–124.
• Chiba, A., Hokamoto, K., Sugimoto, S., Kozuka, T., Mori, A., Kakimoto, E. 2007. “Explosive consolidation of Sm–Fe–N and Sm–Fe–N/(Ni, Co) magnetic powders,” Journal of Magnetism and Magnetic Materials, vol. 310, p. 881–883.
• Emelchenko, G.A., Naumenko, I.G., Veretennikov, V.A., Gordopolov, Y.A. 2009. “Shock consolidation of nanopowdered Ni,” Materials Science and Engineering A, vol. 503, p. 55–57.
• Hokamoto, K., Fujita, M., Tanaka, S., Kodama, T., Ujimoto, Y. 1998. “High-temperature shock consolidatıon of diamond powders using converging underwater shock wave,” Scripta Metallurgica, vol. 39, no.10, p. 1383–1388.
• Yücel, O., Tekin, A. 1997. “The fabrication of boron carbide-aluminium composites by explosive consolidation,” Ceramics International, vol. 23, p. 149-152.
• Szewczak, E., Paszula, J., Leonov, A.V., Matyja, H. 1997. “Explosive consolidation of mechanically alloyed Ti-Al alloys,” Materials Science and Engineering A, vol. 226-228, p. 115-118.
• Chiba, A., Kimura, S., Raghukandan, K., Morizono, Y. 2003. “Effect of alumina addition on hydroxyapatite biocomposites fabricated by underwater-shock compaction,” Materials Science and Engineering A, vol. 350, p. 179-183.
• Chiba, A., Nishida, M., Imamiira, K., Ogura, H., Morizono, Y. 1996. “Fabrication of ZrO2/Ni and ZrO2/Al2O3 functionally graded materials by explosive powder consolidation technique,” Functionally Graded Materials, p. 191-195.
• Hokamoto, K., Tanaka, S., Fujita, M. 2000. “Optimization of the experimental conditions for high-temperature shock consolidation,” International Journal of Impact Engineering, vol. 24, p. 631-640.
• Mamalis, A.G., Gioftsidis, G.N. 1992. “On the extrusion of silver-sheathed superconducting billets fabricated by explosive compaction of YBa2Cu3O7 powder,” Journal of Materials Processing Technology, vol. 30, p. 297-313.
• Mamalis, A.G., Gioftsidis, G.N., Szalay, A., Boday, O. 1989. “The shock wave compaction of high temperature superconducting powders into cylindrical components,” Annals of the CIRP, vol. 38, no. 1, p. 297-301.
• Raming, T.P., Zyl, W.E., Carton, E.P., Verweij, H. 2004. “Sintering, sinterforging and explosive compaction to densify the dual phase nanocomposite system Y2O3-doped ZrO2 and RuO2,” Ceramics International, vol. 30, p. 629–634.
• Kim, Y., Mitsugi, F., Tomoaki, I., Hokamotoa, K., Itoh, S. 2011. “Shock-consolidated TiO2 bulk with pure anatase phases fabricated by explosive compaction using underwater shockwave,” Journal of the European Ceramic Society, vol. 31, p. 1033–1039.
• Fredenburg, D.A., Thadhani, N.N., Vogler, T.J. 2010. “Shock consolidation of nanocrystalline 6061-T6 aluminum powders,” Materials Science and Engineering A, vol. 527, p. 3349–3357.
• Alba-Baena, N.G., Salas, W., Murr, L.E. 2008. “Characterization of micro and nano two-phase regimes created by explosive shock-wave consolidation of powder mixtures,” Materials Characterization, vol. 59, p. 1152-1160.
• Nieh, T.G., Luo, P., Nellis, W., Lesuer, D., Benson, D. 1996. “Dynamic compaction of aluminum nanocrystals,” Acta Materialia, vol. 44, p. 3781–3788.
• Wang, B., Xie, F., Li, Z., Zhang, H. 2016. “Explosive compaction of Al2O3 nano powders,” Ceramics International, vol. 42, p. 8460–8466.
• Yu, L.H., Meyers, M.A., Peng, T.C. 1991. “Shock consolidation of A1-Li alloy powders,” Materials Science and Engineering A, vol. 132, p. 257-265.
• Zhang, L., Elwazri, A.M., Zimmerly, T., Brochu, M. 2008. “Fabrication of bulk nanostructured silver material from nanopowders using shockwave consolidation technique,” Materials Science and Engineering A, vol. 487, p. 219–227.
• Khan, D. F., Yin, H., Li, H., Asadullah, Z. A., Qu, X., Ellahi, M. 2014. “Effect of impact force on Ti–10Mo alloy powder compaction by high velocity compaction technique,” Materials and Design, vol. 54, p. 149-153.