Bakır Folyo Kaplı Yönlendirilmiş Yonga Levhanın Elektromanyetik Girişimi Soğurma Etkinliği

Elektronik endüstrisinin büyümesinin ve haberleşme, otomasyon, biyomedikal, uzay ve diğer alanlardaki yaygın kullanımının etkisi birçok elektromanyetik girişim sorununa yol açmaktadır. Elektromanyetik girişim bir elektronik cihazın, başka bir elektronik cihazdan kaynaklanan, radyo frekansı spektrumunda bir elektromanyetik alanın yakınında çalışmasıyla ortaya çıkan bozulmadır. Bu bozulma elektronik cihazları etkilediği gibi insan sağlığını da etkilemektedir. Bu nedenle, elektromanyetik girişimin olumsuz etkilerinden etkili bir şekilde korunma ihtiyacı ortaya çıkmaktadır. Bu makalede, yönlendirilmiş yonga levha ile bakır levha karma kompozit malzeme olarak kullanılmıştır. Yönlendirilmiş yonga levhanın ara yüzeyi ile yüzeyi bakır folyo ile kaplanarak metal kafes oluşturulmuştur. Bakır folyo kaplı yönlendirilmiş yonga levhanın 1.88 GHz ile 2.62 GHz ve 5.20 GHz ile 5.62 GHz frekansları arasında elektromanyetik soğurma etkinliğinin kabul edilebilir düzeyde olduğu görülmüştür.

Anahtar Kelimeler:

Bakır folyo, elektromanyetik girişim, soğurma, yönlendirilmiş yonga levha

Electromagnetic Interference Shielding Effectiveness of Copper Foil Coated Oriented Strand Board

The influence of growth of electronics industry and its widespread use in communications, automation, biomedical, space and other fields leads to many electromagnetic interference problems. Electromagnetic interference is the deterioration of operation of an electronic device when it is in the close neighborhood of an electromagnetic field in the radio frequency spectrum that is caused by another electronic device. This deterioration affects electronic devices as well as human health. Therefore, there is a need to effectively protect against the adverse effects of electromagnetic interference. In this paper, copper board and oriented strand board were used as a hybrid composite material. The interface and surface of oriented strand board were coated with copper foil and the metal cage was formed. It was found that electromagnetic shielding effectiveness in the frequency range of 1.88 GHz - 2.62 GHz and 5.20 GHz - 5.62 GHz of the oriented copper foil coated oriented particle board was acceptable.

Keywords:

Copper foil, electromagnetic interference, shielding, oriented strand board,

PDF

___

Abdolzadeh, H., Doosthoseini, K., Karimi, A.N., Enayati, A.A. (2011). The effect of acetylated particle distribution and type of resin on physical and mechanical properties of poplar particleboard. European Journal of Wood and Wood Products 69: 3-10.
Aydın, I., Çolakoğlu, G., Çolak, S., Demirkır, C. (2006). Effects of moisture content on formaldehyde emission and mechanical properties of plywood. Building and Environment, 41: 1311-1316.
Beall, C., Delzell, E., Cole, P., Brill, I. (1996). Brain tumors among electronics industry workers. Epidemiology, 7(2): 125-130.
Dunky, M., Pizzi A. (2002). Wood Adhesives, Adhesive Science and Engineering-2: Surfaces, Chemistry and Applications, Elsevier, Amsterdam.
Geetha, S., Satheesh Kumar, K.K., Chepuri R. K. Rao, Vijayan, M., Trivedi, D.C. (2009). EMI shielding: Methods and materials – a review. Journal of Applied Polymer Science 112: 2073-2086.
Kaya, A.İ. (2015). Atık kâğıtlardan geri kazanılmış liflerden kompozit malzeme üretim olanaklarının araştırılması, Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü, (Doktora tezi), Isparta.
Keangin, P., Vafai, K., Rattanadecho, P. (2013). Electromagnetic field effects on biological materials. International Journal of Heat and Mass Transfer 65: 389-399.
Loomis, D.P., Savitz, D.A. (1990). Mortality from brain cancer and leukaemia among electrical workers. British Journal of Industrial Medicine 47(9): 633-638.
Rebollar, M., Pérez, R., Vidal, R. (2007). Comparison between oriented strand boards and other wood-based panels for the manufacture of furniture. Materials and Design 28: 882-888.
Roumeli, E., Pavlidou, E., Papadopoulou, E., Vourlias, G., Bikiaris, D., Paraskevopoulos, K.M., Chrissafis, K. (2012). Synthesis, characterization and thermal analysis of urea formaldehyde/nano SiO2 resins. Thermochimica Acta 527: 33-39.
Salman, S. (2006). Hormones, breast cancer, EMF’s cellphones. Total Healty 28(1): 24-25.
Schulz, R.B., Plantz, V.C., Brush, D.R. (1988). Shielding theory and practice. IEEE Transactions on Electromagnetic Compatibility 30(3): 187-201.
Singh, A.K., Shishkin, A., Koppel, T., Gupta, N. (2018). A review of porous lightweight composite materials for electromagnetic interference shielding. Composites Part B: Engineering 149: 188-197.
Thomas, D.W.P., Denton, A., Konefal, T., Benson, T.M., Christopoulos, C., Dawson, J.F., Marvin, A.C., Porter, J. (1999). Characterization of the shielding effectiveness of loaded equipment enclosures. International Conference and Exhibition on Electromagnetic Compatibility, July 12-13, 1999, York, UK, 89-94p.
TS EN 300 (1997). Yönlendirilmiş Yonga Levhaları Tarifler, Sınıflandırma ve Özellikler, TSE, Ankara.
Violette, J.L.N., White, D.R.J., Violette, M.F. (1987). Electromagnetic Compatibility Handbook. Van Nostrand Reinhold Company, New York.
Zamanian, A., Hardiman, C. (2005). Electromagnetic radiation and human health: A review of sources and effects. High Frequency Electronics 4(3): 16-26.