Otomotiv sektöründe görünen yüzeylerin matematiksel sınıflandırmaları
Yüzey modelleme bilgisayarlı grafiğin başlıca konusudur. Bilgisayar destekli tasarım aşamasında oluşturulan geometrik elemanlar katı, yüzey ve tel kafes elemanları olarak tanımlanır. Bu elemanlar matematiksel bir fonksiyon türünün sonucudur ve matematiksel model olarak adlandırılırlar. Matematiksel yüzey modelleri sınıf A, B ve C gibi sertifikasyon ve sınıflandırmalar ile tanımlanır. Bu sınıflandırma yüzey modelinin kullanım yeri, şekli ve görselliğine göre değişmektedir. Bu çalışmada yüzey modelleme çeşitleri ve yüzeyler arasındaki bağlar tanımlanmış ayrıca otomotiv sektöründe kullanımları ve yüzey sınıflandırma değerleri belirtilmiştir.
Mathematical classification of displaying surfaces in automotive industry
Surface Modeling is mainly computerized graphic. Geometric entities are created at the design stage are defined as solid, wireframe and surface elements. This type of elements is the result of a mathematical function and are called mathematical model. Mathematical Surface Models are classified and defined as Class A, B and C. According to using location, shape and display, these classifications are changed. In this journal, types of surface model and connection between surfaces were determined. Additionally, using in automotive industry and surface classification values were identified.
___
- 1. Çınar, A., Arslan, A., 2002, “Bulanık Mantık Tabanlı Yüzey Modelleme ve Üç Boyutta Nesne Kaynaştırma İşlemine Uygulanması”, Gazi Üniversitesi Müh. Mim. Fak. Derg., Cilt 17, No 4
- 2. Bournon, G., 2007, “Why Design Process is For Us Strategic Subject”, Dassault Systemes Technical Documentation
- 3. Fabrizio, G., 2004, “Mathematization of Austhetical Surfaces, Class A, B and C”, Fiat Auto Normazione, Fiat Automotive Technical Documentation
- 4. Wikipedia., 2011, “Freeform Surface Modelling”, Wikipedia Documentation
- 5. Hsakou, R., 2006, “Curvature: The Relevant Criterion for Class-A Surface Quality”, JEC Composites Magazine, Vol 23, Page 105-108
- 6. Bournon, G., 2008, “Styling Surfaces Checking Tools In Catia V5”, Dassault Systemes Technical Documentation