Influence of Natural Dyes as Dyeing Material on Surface Roughness of Eastern Redcedar

The objective of this study was to evaluate surface quality of Eastern redcedar (Juniperus virginana L.) samples finished with natural dye produced from the Madder root (Rubia tinctorium L.] with two kinds of mordants, ferrous sulfate (Fe2(SO4)3.7H2O) with technical grade 96% purity, supplied by Merck and alum KAl2(SO4)3.18H2O (puriss. p.a. Fulka). Surface roughness of the control and finished samples were measured employing a fine stylus type profilometer resulted in two parameters, namely average roughness (Ra) and mean peak-to-valley height (Rz). Finishing materials were applied to the surface of the samples by soaking with and without using ultrasound in a tank. Average value of Ra taken from the surface of unfinished control samples and finished samples were 2.60 μm and 3.25 μm, respectively. It appears that natural dye with alum and ferrous sulfate used as dying materials did not adversely influence overall surface quality of the samples. Based on the initial findings in this work such root dye would have potential as eco-friendly non-toxic colorant to extend the service life of product manufactured from Eastern redcedar.

___

  • Angelini L.G, Pistelli L., Belloni P, Bertoli A & Panconesi S. 1997. Rubia tinctorum a Source of Natural Dyes: Agronomic Evaluation Quantitative Analysis of Alizarin and Industrial Assays. Industrial Crops and Products, 6: 303-311.
  • Davis P.H. 1982. Flora of Turkey and the East Aegean Islands. Edinburgh University Press, ISBN: 0852243960, Volume 07. p947.
  • Billmeyer F.W.J & Saltzman M. 1991. Principles of color technology. John Wileyand Sons. New York. p240.
  • Goktas O, Duru E.M, Yeniocak M & Ozen E. 2008. Determination of the Color Stability of an Environmentally Friendly Wood Stain Derived from Laurel (Laurus nobilis L.) Leaf Extracts Under UV Exposure. Forest Products Journal, 58 (1/2):77-80.
  • Goktas O, Ozen E, Duru M.E & Alma H. 2009b. Determination of the Color stability of an environmentally-friendly wood stain from saffron (Crocus sativus L.) exstracts under uv exposure. Wood Research. 54(4): 111-118.
  • Goktas O, Ozen E, Baysal E, Mammadov R, Alma H & Sonmez A. 2009a. Color stability of wood treated with maddet rcot (Rubia tinctorium) extract after lightfastness test, Wood Res, 54(1): 37-44.
  • Guzel B & Akgerman A, 2000. Mordant dyeing of wood by supercritical processing. Journal of Supercritical Fluids. 18: 247-252.
  • Hiziroglu S & Holcomb R. 2005. Some of the Properties of Three-Layer Particleboard Made from Eastern Redcedar. Journal of Building and Environment. Elsevier Science. 40(5): 719-723
  • Hiziroglu S. 1996. Surface Roughness Analysis of Wood Composites: A Stylus Method. Forest Products Journal. 46(7/8):67-72. Forest Products Laboratory, Wood Handbook. USDA Forest Service.
  • Hiziroglu S, Holcomb R & Wu Q. 2002. Manufacturing Particleboard from Eastern Redcedar. Forest Products Journal. 52(7/8): 72-76
  • Hiziroglu S, Anwar U.M.K, Hamdan H, & TAHIR P.M.D. 2008. Evaluation of Surface Quality of Some Malaysian Species as Function of Outdoor Exposure. Journal of Materials Processing Technology, Elsevier Science. 199: 156-162.
  • Kasemsiri P, Hiziroglu S & Rimdusit S. 2012. Characterization of Heat Treated Eastern Redcedar (Juniperus virginiana L.) Journal of Material Processing Technology. 212 (6): 1324-1330.
  • McLaren. K. 1983. The Color Science of Dyes and Pigments, Bristol,AdamHilger Ltd.
  • Satoshi S & Hiziroglu S. 2010. Evaluation of shear strength of Japanese Wood Species as Function of Surface Roughness. Forest Products Journal. 60(4):400-404
  • Singh R, Jain A, Panwar S, Gupta D & Khare S.K. 2005. Antimicrobial Activity of Some Natural Dyes, Dyes and Pigments, 66: 99-102.
  • Sivakumar, V, & Rao, P. G. 2003. Studies on the use of power ultrasound in leather dyeing. 10(2): 85-94.
  • Sivakumar V, Lakshmi Anna J, Vijayeeswarri J & Swaminathan G. 2009. Ultrasound Assisted Enhancement in Natural Dye Extraction from Beetroot for Industrial Applications and Natural Dyeing of Leather. Ultrasonics Sonochemistry 16: 782–789.
  • Tsatsaroni E, Liakopoulou K & Eleftheriadis M.I. 1998. Comparative Study of Dyeing Poperties of Two Yellow Natural Pigments-Effect of Enzymes and Proteins. Dyes and Pigments 37(4): 307-315.
  • Vankar P.S. 2000. The Chemistry of Natural dyes, General article, Resonance PP. 73-80.
  • Wang L & Weller C.L. 2006. Recent advances in extraction of nutraceuticals from plants,” Trends in Food Science & Technology. 17(6): 300-31.