Performance analysis and exergy assessment of an inertance pulse tube cryocooler

Performance analysis and exergy assessment of an inertance pulse tube cryocooler

The world is facing the problems of the energy crisis. Thermal analysis and energy conservation of the engineering devices help to improve their performance. This paper conducted an experimental investigation for the performance analysis and exergy assessment of an Inertance Pulse Tube Cryocooler (IPTC) that uses working fluid -helium operated between 80 K cold end side temperature and room temperature.The variation of the different performance parameters like the effect of charge pressure, pulse tube volume, pulse tube length, etc., and its effect on the refrigerating effect isdescribed graphically. Exergy analysis involves the use and concepts of energy andexergy balances, enthalpy, entropy, and exergy calculations at various stages in thesystem. Exergy analysis identifies the zones of key exergy destruction that occurs insidethe system, which afterward can be subjected to its minimization to amend the systemperformance. The actual exergy efficiency value calculated for the overall system is 21.30 %. The decreasing order of exergy efficiency among the different components is acompressor (38.79 %), a hot end heat exchanger (6.19 %), regenerator, pulse tube andinertance tube (6 %), and cold end heat exchanger (2.70 %).
Journal of Thermal Engineering-Cover
  • Yayın Aralığı: 6
  • Başlangıç: 2015
  • Yayıncı: YILDIZ TEKNİK ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

CFD modeling of influenza virus diffusion during coughing and breathing in a ventilated room

Sattar ALJABAIR, Israa ALESBE, Ali ALKHALAF

Effect of module operating temperature on module efficiency in photovoltaic modules and recovery of photovoltaic module heat by thermoelectric effect

Ramazan KAYABAŞI1, Metin KAYA

Performance improvement of shell and tube heat exchanger by using Fe3O4/water nanofluid

Saad NAJIM, Adnan HUSSEIN, Suad Hassan DANOOK

Experimental investigation for heat transfer augmentation method of jet impingement using a fluid of different concentrations of water and ethylene glycol (EG)

Subhash LAHANE, Prashant DESHMUKH, Manoj NARGADE

Control of noise and temperature using radial air injection inside engine silencer

Nilaj DESHMUKH, Abhijit WAGHMODE

Optimization of energy and exergy parameters for a conceptual after burning turbojet engine

Hakan AYGUN

Review on latent thermal energy storage using phase change material

Sattar ALJABAIR, Israa ALESBE, Sahira Hasan IBRAHIM

Comment on “numerical analysis of heat transfer in multilayered skin tissue exposed to 5G mobile communication frequencies” by Jagbir Kaur and S.A. Khan

Paul BEN ISHAİ

Performance analysis and exergy assessment of an inertance pulse tube cryocooler

Prateek MALWE, Bajirao GAWALI, Rustam DHALAIT, Rustam DHALAIT, Nandkishor Sheshrao DESHMUKH

Comparative analysis and optimization of thermodynamic behavior of combined gas-steam power plant using grey-taguchi and artificial neural network

Komal MADAN, Omendra Kumar SINGH