ELEKTRON IŞIN KAYNAK YONTEMi
Elektron ism kaynak yonterni ergitme ve kau hal kaynak yonternleri ile eldeedilemeyen mekanik ve mikroyapi ozelliklerin elde edilmesi icin kullarulan bir ilerikaynak teknolojisidir. Elektron ism kaynak teknolojisinde dusuk lSI girdisi ve eldeedilen kaynak mukavemetleri dikkatleri bu kaynak yonterninin kullamrmnayoneltrnistir. Yontemin pahah olmasi endustrideki kullarnrn alanlanmkrsitlamaktadrr, Bu yontemin daha iyi tamnlmasr, avantaj ve dezavantajlannmbilinmesi, mevcut kullarum alanlanmn artrnasma yardimci olacaknr,
ELECTRON BEAM WELDING
Electron beam welding is an advanced welding technique used to achievetechnical features which can not be achieved by using solid state and fusion weldingmethods.This advanced welding methot is used due to its lower heat entry andwelding streght features. The use of method is limited due to the high cost. Anextensive overview of this method including pros and cons, and higher features ofcurrent use of this method will increase the use of this method.
___
- [1] Lim, S. c. Gupta, M., Ren, L. and Kwok, J. K. M., The Tribological
Properties of Al-Cu/SiCp Metal Matrix Composites Fabricated Using
the Rheocasting Technique, Journal of Materials Processing
Technology, Journal of Materials Processing Technology, 89-90, 1999,
591-596.
- [2] Ma, Z. Y. and Tjong, S. C; In Situ Ceramic Particle Reinforced Al
Matrix Composites Fabricated by Reaction Pressing in the Ti02 (Tit-
Al-B (B203) Systems, Metallurgical and Materrials Transactions A,
28A, 1997,1931-1942.
- [3] Surappa, M. K. and Rohatgi, P. K., Preparation and Properties of Al-
Ceramic Particle Composites, Journal of Materials Science, 16, 1981,
983-993.
- [4] Rizkalla, H. L. and Abdulwahed, A., Some Mechanical Properties of
Metal-Nonmetal AI-Si02 Particulate Composites, Journal of Materials
Processing Technology, 5, 1996, 398-403.
- [5] Aghajanian, M. K., Burke, J. T., White, D. R. and Nagelberg, A. S., A
New Infiltration Process for the Fabrication of Metal Matrix
Composites, 'Sample Quarterly, July 1989,43-46.
- [6] Sukumaran, K., Pillai, S. G. K., Pillai, R. M., Kelukutty, V. S., Pai, B.
C; Satyanarayana K. G. and Ravikumar, K. K., The Effects of Mg
Additions on the Structure and Properties of AI-7Si- I OSiCp Composites,
Journal of Materials Science, 30,1995, 1469-1472.
- [7] Seo, Y. H. and Kang, C. G., The Effect of Applied Pressure on Particledispersion
Characteristics and Mechanical Properties in Melt Stirring
Squeeze-cast SiCp/AI composites, Journal of Materials Processing
Technology, 55,1995, 370-379.
- [8] Kuruvilla, A. K., Prasad, K. S., Bhanuprasad, V. V. and Mahajan, Y. R.,
Microstructure-property Correlation in AlITiB2 (XD) Composites,
Scripta Metallurgica et Materialia, 24, 1990. 873-878,
- [9] GOI, F., Seramik Parcacik Takviyeli Kompozltlerin Uretim Yontemleri
ve Orellikleri, M. U. Fen Bilimleri Dergisi, 15, 1999, 101-114.
- [10] Arsenault, R. J. and Wu, S. B., A CoMParison of PM vs. Melted SiC/AI
Composites, Scripta Metallurgica, 22,1998, 767-772.
- [11] Turker, M., Ozdemir, A. T., Ogel, B. ve Yavuz, A., AI-SiC Tozlartntn
Mekanik Alasimlama Degirmeninde Ogutme Zamantntn Kompozit To;
Yaptstna Etkisinin Arasttrilmast, Uluslararasi Katrhrnh 2. Ulusal
Toz Metalurjisi Konferansl,1999.425-432.
- [12] BY D. Powers and G. Schubert, Electron beam welding: A useful tool
for the Automotive Industry,February 2000,p 35-38.
- [13] ASM Handbook, Welding, brazing and soldering, 7th edition,v 6, Mat.
Park,Ohio p 427, 1983,
- [14] M B D. Ellis, Joining of aluminium based metal matrix composites,
International Materials Reviews 1996, vol 41, no 2, p 41.
- [15] S.Amk, Kaynak teknigi el kitabt yontemler ve donanimlar, Gedik
holding 1991, istanbul, 47-54.
- [16] By E.Gaydusek, Advences in non-vacuum electron beam technology,
Welding journal,1980,17.
- [17] BY D. E. Powers, Nonvacuum elektron beam welding enhances
automotive manufacturing, Welding journal, Novamber 1997, p 59.
- [18] G. M1adenov, K. Vutova and S. Wojcicki, Experimental invastigation
of the weld depth and thermal efficiency during electron beam welding,
Vacuum, v: 51, No:2, 1998,231.
- [19] Z. Sun, R.Karppi, The application of electron beam welding for the
joining of dissimilar meatals: an overview, Journal of materials
processing technology, no 59, 1996, P 257.
- [20] S.Tosto and F. Nenci, Electron beam welding and post-weld
treatments of2219-T6, Journal of physique IV,vol 3, November 1993,
p 1029.
- [21] P S.Wel, C Y. Chang, C T. Chen, Surface ripple in electron beam
welding solidification, Journal of heat transfer, vol 118, november
1996, p 960.
- [22] By A. Munitz, C. Cotler, H. Shaham, and G.Kohn, Electron beam
welding of magnesium AZ91D plates, Welding journal supplement,
July 2000, p 202.
- [23] P. Petrov, C. Georgiev and G. Petrov, Experimental investgation of
pool formation in electron beam welding, Vacuum 1998, V 51, P 339.
- [24] W A. Baeslack and F H. Froes, Joining similar and dissimilar
advanced engineered materials, Journal of materials science, 1995,
March, p 13.
- [25] M C. Chaturvedi, N L. Richards, Q. XU, Electron beam welding of a
Ti-4SAl-2Nb-2Mn+O.8 vol. %TiB2 XD alloy, Materials science and
engineering A239-240, 1997,p 605.
- [26] E.Koleva, G. Mladenov, K. Vutova, Calculation of weld parameters
and thermal efficiency in electron beam welding, Vacuum 53, 1999,67.
- [27] Welding Handbook, Resistance and solid-state welding and joining
processes, v; 6,1980,128-136