___

• Baharoǧlu, M., Nemli, G., Sari, B., Bardak, S., Ayrilmiş, N. (2012). The influence of moisture content of raw material on the physical and mechanical properties, surface roughness, wettability, and formaldehyde emission of particleboard composite. Compos. Part B Eng. 43. https://doi.org/10.1016/j.compositesb.2011.10.020.Bardak, S., Sari, B., Nemli, G., Kırcı, H., Baharoǧlu, M. (2011). The effect of decor paper properties and adhesive type on some properties of particleboard. Int J Adhes Adhes. 31,412-415. Candan, Z., Akbulut, T. (2013). Developing environmentally friendly wood composite panels by nanotechnology. BioResources 8, 3590–3598. https://doi.org/10.15376/biores.8.3.3590-3598.Ciannamea, E.M., Marin, D.C., Ruseckaite, R.A., Stefani, P.M. (2017). Particleboard Based on Rice Husk: Effect of Binder Content and Processing Conditions. J. Renew. Mater. 5, 357–362. https://doi.org/10.7569/jrm.2017.634125.Conner, A.H., Service, U.F. (2013). Polymeric materials encyclopedia. Choice Rev. Online 34, 34-5688-34–5688. https://doi.org/10.5860/choice.34-5688.Costa, N.A., Pereira, J., Ferra, J., Cruz, P., Martins, J., Magalhães, F.D., Mendes, A., Carvalho, L.H. (2013). Scavengers for achieving zero formaldehyde emission of wood-based panels. Wood Sci. Technol. https://doi.org/10.1007/s00226-013-0573-4.El Mansouri, N.E., Pizzi, A., Salvadó, J. (2007). Lignin-based wood panel adhesives without formaldehyde. Holz als Roh - und Werkst. 65, 65–70. https://doi.org/10.1007/s00107-006-0130-z.EN 312-2 (1996). “Particleboards. Specifications. Part 2: Requirement for general purpose boards for use in dry conditions,” European Standards, Brussels, Belgium.EN 120-1 (1994). “Determination of formaldehyde content in fiberboard by using perforator method,” European Standards, Brussels, Belgium.Ghani, A., Ashaari, Z., Bawon, P., Lee, S.H. (2018). Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavenger. Build. Environ. https://doi.org/10.1016/j.buildenv.2018.06.020.Jiang, C., Li, D., Zhang, P., Li, J., Wang, J., Yu, J.,,, (2017). Formaldehyde and volatile organic compound (VOC) emissions from particleboard: Identification of odorous compounds and effects of heat treatment. Build. Environ. https://doi.org/10.1016/j.buildenv.2017.03.004.Jiang, J., Lu, X. (2017). Effect of blocked polyurethane prepolymer on properties of MUF-particleboard made from high moisture particles. Int. J. Adhes. Adhes. 78, 189–194. https://doi.org/10.1016/j.ijadhadh.2017.07.002.Moubarik, A., Mansouri, H.R., Pizzi, A., Charrier, F., Allal, A., Charrier, B. (2013a). Corn flour-mimosa tannin-based adhesives without formaldehyde for interior particleboard production. Wood Sci. Technol. https://doi.org/10.1007/s00226-012-0525-4.Moubarik, A., Pizzi, A., Charriera, F., Allala, A., Badia, M., Mansouri, H.R., Charrier, B. (2013b). Mechanical characterization of industrial particleboard panels glued with cornstarch-mimosa tannin-urea formaldehyde resins. J. Adhes. Sci. Technol. https://doi.org/10.1080/01694243.2012.711739.Park, B.D., Kang, E.C., Park, J.Y. (2006). Effects of formaldehyde to urea mole ratio on thermal curing behavior of urea-formaldehyde resin and properties of particleboard. J. Appl. Polym. Sci. https://doi.org/10.1002/app.23538.Pirayesh, H., Khanjanzadeh, H., Salari, A. (2013). Effect of using walnut/almond shells on the physical, mechanical properties and formaldehyde emission of particleboard. Compos. Part B Eng. https://doi.org/10.1016/j.compositesb.2012.05.008.Pizzi, A., Valenezuela, J., Westermeyer, C. (1994). Low formaldehyde emission, fast pressing, pine and pecan tannin adhesives for exterior particleboard. Holz als Roh- und Werkst. https://doi.org/10.1007/BF02621421.Que, Z.L., Wang, F. Bin, Ma, L.F., Furuno, T. (2013). Effect of loading ratio, conditioning time and air exchange rate on the formaldehyde emission from wood-based board using large chamber and desiccator method. Compos. Part B Eng. https://doi.org/10.1016/j.compositesb.2012.11.019.Salem, M.Z.M., Böhm, M., Beránková, J., Srba, J. (2011). Effect of some manufacturing variables on formaldehyde release from particleboard: Relationship between different test methods. Build. Environ. https://doi.org/10.1016/j.buildenv.2011.04.004Sheng, C., Wenting, B., Shijian, T., Yuechuan, W. (2008). Electrochromic Behaviors of Poly (3-n-octyloxythiophene ). Polymer (Guildf). https://doi.org/10.1002/appYang, T.H., Lin, C.J., Wang, S.Y., Tsai, M.J. (2007). Characteristics of particleboard made from recycled wood-waste chips impregnated with phenol formaldehyde resin. Build. Environ. 42, 189–195. https://doi.org/10.1016/j.buildenv.2005.08.028